• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.482-491
• /
• 2018

The practical design methodology of a three-phase dual active bridge (3ph-DAB) converter applied to low voltage direct current (LVDC) applications is proposed by using a mathematical model based on the steady-state operation. An analysis of the small-signal model (SSM) is important for the design of a proper controller to improve the stability and dynamics of the converter. The proposed lead-lag controller for the 3ph-DAB converter is designed with a simplified SSM analysis including an equivalent series resistor (ESR) for the output capacitor. The proposed controller can compensate the effects of the ESR zero of the output capacitor in the control-to-output voltage transfer function that can cause high-frequency noises. In addition, the performance of the power converter can be improved by using a controller designed by a SSM analysis without additional cost. The accuracy of the simplified SSM including the ESR zero of the output capacitor is verified by simulation software (PSIM). The design methodology of the 3ph-DAB converter and the performance of the proposed controller are verified by experimental results obtained with a 5-kW prototype 3ph-DAB converter.

• 한국건설관리학회논문집
• /
• 제12권4호
• /
• pp.50-58
• /
• 2011

린은 고객이 정하는 가치를 정의하고 가치의 흐름에 방해되는 불필요하고 낭비되는 요소를 없애는 과정을 기본으로 하는 경영철학이다. 생산관리에서 출발한 린이라는 경영철학은 건설 산업에서“린 건설”이라는 이름으로 건설단계에서 시작되었으며 이제는 생산성 향상을 효과적으로 이룰 수 있는 설계단계로의 확장이 필요한 시점이다. 현재 국내의 구조설계업무방식은 순차적 공학 개념의 Point-based Design 방식으로 설계자의 경험과 판단에 의존하여 초기 설계안을 결정하고 이후 상세설계를 진행하는 과정으로 설계업무가 진행되었다. 이에 반해 동시공학 개념의 Set-based Design 방식은 전체 프로젝트 관점에서 낭비요소를 없애고 프로젝트 생산성 향상을 위해 다양한 설계안을 제한된 범위 내에서 바로 선택하지 않고 더 확실한 정보가 나올 때까지 설계안의 선택을 유보하여 합리적이고 경제적인 설계안을 결정하는 린 기반의 설계 프로세스이다. 본 연구에서는 전통적인 구조설계방식에 대해 SBD방식을 도입하고, SBD프로세스의 의사결정기법으로 계층화분석법(AHP)을 적용하여, 후행업무단계들에 대한 사전 고려로 프로젝트 전체 관점에서의 낭비를 최소화하고 생산성을 향상할 수 있는 설계 방법론을 제안하고 하고자 한다. 이를 위해 PBD와 SBD방식에 대한 분석 및 의사결정방안을 모색하였고, 제안된 SBD프로세스의 사례연구를 통해 실무에서의 활용방안을 제시하였다.

• 한국환경과학회지
• /
• 제23권3호
• /
• pp.359-368
• /
• 2014

The aim of our research was to apply experimental design methodology in the optimization of N, N-Dimethyl-4-nitrosoaniline (RNO, which is indictor of OH radical formation) degradation using gas mixing-circulation plasma process. The reaction was mathematically described as a function of four independent variables [voltage ($X_1$), gas flow rate ($X_2$), liquid flow rate ($X_3$) and time ($X_4$)] being modeled by the use of the central composite design (CCD). RNO removal efficiency was evaluated using a second-order polynomial multiple regression model. Analysis of variance (ANOVA) showed a high coefficient of determination ($R^2$) value of 0.9111, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the RNO removal efficiency and independent variables in a coded unit: RNO removal efficiency (%) = $77.71+10.04X_1+10.72X_2+1.78X_3+17.66X_4+5.91X_1X_2+3.64X_2X_3-8.72X_2X_4-7.80X{_1}^2-6.49X{_2}^2-5.67X{_4}^2$. Maximum RNO removal efficiency was predicted and experimentally validated. The optimum voltage, air flow rate, liquid flow rate and time were obtained for the highest desirability at 117.99 V, 4.88 L/min, 6.27 L/min and 24.65 min, respectively. Under optimal value of process parameters, high removal(> 97 %) was obtained for RNO.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.337-338
• /
• 2006

The requirement to reuse a design knowledge have been enlarged with the automation of a design system. A design knowledge gives logical and technical meanings to design data of a problem area. The representation of the knowledge is distributed and developed independently. For this reason, we need a general methodology with a semantic interoperability of design knowledge. In this paper, we accept previous requirements by using semantic query system with ontology repository.

• 적정기술학회지
• /
• 제5권2호
• /
• pp.82-90
• /
• 2019

반응표면분석법(Response surface methodology, RSM)의 Box-Benhken Design (BBD) 모델을 사용하여, 350℃로 가열한 골탄의 수중 불소 흡착 조건을 최적화하였다. 최적화 변수로 수온, pH, 접촉시간, 초기불소농도를 선택하였고, Box-Behnken Design에 의한 29회의 매트릭스 실험값으로부터 2차 반응 표면식을 얻었다. 이 반응 모델식의 결정계수(R²)는 0.9249였고 모델의 p-value는 <0.0001로 나타나 실험 변수들이 흡착결과에 매우 유의미한 영향을 미친다는 것을 알 수 있었다. 반응 표면식에 의해 예측된 골탄의 불소 흡착 최적 조건은 수온 39.68℃, pH 6.25, 접촉시간 88.81 min, 초기불소농도 14.64 mgF/L이었으며 이때의 불소 흡착용량(adsorption capacity)은 6.46 mgF/g인 것으로 분석되었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.742-747
• /
• 2005

A model, which can analyze the hydrological performance for small hydropower(SHP) plants having no flow duration characteristics has been studied and developed. System performance of existing SHP plant under operating was analyzed by using the developed model. The annual operational rate of SHP plant showed that the data were in good agreement with predicted results from the model. Based on these results, several SHP sites to be exploited were selected and the performance characteristics were analyzed by using the developed model. Also, primary design values such as design flow rate, plant capacity, and operational rate were suggested. As a result, it was found that the methodology used in this study is useful tool to predict the hydrological system performances of SHP sites.

• 품질경영학회지
• /
• 제4권1호
• /
• pp.13-19
• /
• 1976

In the quality planning phase, the techniques for measuring cost-quality trade-offs are used for the selection of the optimal design specifications when design flexibility permits significant trade-offs to be made. But the product quality is not only depends on the developing cost, but also the time for developing that product. Therefor it is important to seek a methodology for estimating time-cost-quality trade-offs associated with the quality planning projects. This paper is aimed to find a methodology of time-cost-quality trade-offs and to develop a proper algorithm.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.99-106
• /
• 2004

In developing criteria for establishing workstation reach limits, it is essential to select the appropriate anthropometric stereotype for solving a specific design problem. The most important factor for comfortable workstation is to eliminate trunk flexion from the neutral (upright) posture. A solution to this design can be developed using population stature and link length data. This paper provides a methodology for design of comfortable workstation using anthropometric stereotype. Application of this methodology can be utilized in various designs for work space including standing and sitting workplace. For the purpose of this study, the data are measured by some parts on body such as stature, arm length, wrist height, elbow height, and shoulder hight. The samples for this study are randomly chosen from university students in Seoul and Kangnung during sixteen months (2003.3-2004.6).

• 한국통신학회논문지
• /
• 제31권1C호
• /
• pp.46-54
• /
• 2006

The design method of synthetic aperture radar processor (SARP) in the critical design stage is to describe the processing algorithm, to estimate the fractional errors, and to set out the software (SW) and hardware (HW) mapping. The previous design methods for SARP are complex and depend on HW. Therefore, this paper proposes a critical design method that is of more general and independent of HW. This methodology can be applied for developing the space-based SARP using range-Doppler algorithm (RDA).

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.358-373
• /
• 2007

In this paper, we proposed the next generation mobile convergence service business model creation methodology. In order to establish such a business model creation methodology framework, we first introduce the service model based on our previous research results on next generation mobile convergence services. The service model contains several components such as infrastructures, operations, and provision of services that are indispensible for providing the next generation mobile services. Finally, by adding service and value flows to the developed service model, we propose the next generation mobile services business model creation methodology. To achieve this objective, we first derive necessary components of business model including actors, their relationships, and roles. In addition, we propose service composition methodology for creating new mobile services and its corresponding business models.