• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.622-628
• /
• 2013

Nanocrystalline spinel lithium manganese oxide ($LiMn_2O_4$) powders with narrow-size-distribution, pure-phase particles, and high crystallinity with an average crystallite size of about 70 nm were synthesized at $600^{\circ}C$ for 6 h in air by freeze drying method. Spinel $LiMn_2O_4$ is also prepared by sol-gel using citric acid as a chelating agent. The influence of different parameters such as pH conditions, solvent, molar ratio of citric acid to total metal ions, calcination temperature, starting material on the structure, morphology and purity of this oxide was investigated. The results of sol-gel method show that pure $LiMn_2O_4$ with average crystallite size of about 130 nm can be produced from nitrate salts as starting materials at $800^{\circ}C$ for 6 h in air. The optimum pH and molar ratio of chelating agent to total metal ions are $4{\leq}pH{\leq}6$ and 1.0, respectively. A possible mechanism on the formation of the nanocrystallines synthesized by sol-gel was also discussed. At the end a comparison of the differences between two methods was made on the basis of x-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) tests.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.867-873
• /
• 2010

The total phenolic contents and the antioxidant activities of methanolic extracts of different parts (fruit, calyx, leaf, stem, and root) of Physalis alkekengi var. francheti were investigated using established in vitro systems including DPPH radical-scavenging, nitrite-scavenging, superoxide anion radical-scavenging activity, measurement of reducing power, and assessment of the metal-chelating effect. The highest extraction yield was from fruit (52.55%), whereas the lowest levels were obtained from root (10.49%) and stem (12.88%).The leaf extract had the highest total phenolic (58.47 mg/g) and total flavonoid (4.83 mg/g) contents, plus the greatest antioxidant activity, as shown by the DPPH radical-scavenging assay, and the highest levels of reducing power at concentrations of 1 and 5 mg/mL. In addition, the calyx also showed good antioxidant activity.These findings indicate that methanolic extracts of leaf and calyx may be useful in the food manufacturing and nutraceutical industries.

• Preventive Nutrition and Food Science
• /
• v.10 no.4
• /
• pp.316-325
• /
• 2005

The antioxidant potential of a $75\%$ methanolic extract of highbush blueberry (Vaccinium corymbosum L.) and its different fractions was investigated using different reactive oxygen species (ROS), nitric oxide (NO.), metal chelating and lipid peroxidation assays. Methylene chloride and $75\%$ methanol fractions showed equally high activities $(IC_{50} 0.010 mg/mL)$ for hydroxyl radical (HO) scavenging. Higher hydrogen peroxide $(H_2O_2)$ scavenging values were reported for the ethyl acetate and methylene chloride fractions and their $IC_{50}$ values were 0.20 and 0.15 mg/mL, respectively. Nitric oxide (NO.) and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging activities were higher in ethyl acetate and methylene chloride fractions. Chloroform and water fractions showed higher activities in superoxide $(O_2.)$ scavenging. All fractions showed strong metal chelating capacities compared with the commercial antioxidants tested. The $0.1\%$ ethyl acetate fraction showed notable capacity to suppress lipid peroxidation in both fish oil and linoleic acid. Phenolic content was measured in all the fractions and methanolic extract. Among the fractions, ethyl acetate fraction showed the highest phenolic content.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.367-374
• /
• 2022

In recent years, research into medicinal herbs with antioxidative activities has increased. Chrysanthemum morifolium and Chrysanthemum indicum are aromatic herb plants and that have long been used in traditional Vietnamese medicine. This study aims to evaluate the chemical compositions and antioxidative activities of essential oils hydrodistilled from the flower heads of C. morifolium and C. indicum. The chemical compositions of the essential oils were compared using gas chromatography/mass spectrometry (GC/MS) analysis. The antioxidative activity was determined and evaluated spectroscopically by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, reducing power, and total antioxidant capacity assays. According to the GC/MS results, chrysanthenone was predominant in the essential oils of both C. morifolium (64.14%) and C. indicum (32.02%). This is the first report of the identification of chrysanthenone as a major constituent of the essential oil of C. morifolium. Both Chrysanthemum oils were also revealed to possess antioxidant potential, exhibiting high antioxidative activities. In particular, the DPPH radical scavenging activities of the C. morifolium and C. indicum oils at a concentration of 100 mg/mL were 76.9 and 83.2%, respectively. The metal chelating values of C. morifolium and C. indicum were 0.85 and 0.76, whereas the reducing power values of that at 100 mg/mL were 0.76 and 0.71, respectively. This study provides the chemical properties of the essential oils of both C. morifolium and C. indicum grown in Vietnam and their potential antioxidant capacity.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.693-698
• /
• 2002

A method has been described for the determination of Cu(Ⅱ), Pb(Ⅱ), Ni(Ⅱ), Cd(Ⅱ), Mn(Ⅱ) and Fe(Ⅲ) by flame atomic absorption spectrometry (FAAS) after preconcentration on Amberlite XAD-16 resin, using hexamethyleneammonium-hexamethylenedithiocarbamate (HMA-HMDTC) as a chelating agent, and NH3/NH4Cl buffer solution (pH 9). Influences of various analytical parameters such as pH, concentration of nitric acid, amount of analytes, diverse ions and sample volume were investigated. The relative standard deviation (RSD) and the detection limit (LOD) were found in the range of 0.8-2.9% and 0.006-0.277 ㎍/mL,respectively. Recoveries obtained by the column method were quantitative ( >95%) at optimum conditions.The method was applied to the determination of some metal ions in seawater and wastewater samples. A high preconcentration factor (about 150 for seawater and 75 for wastewater samples) and simplicity are the main advantages of this suggested method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.81-88
• /
• 2015

The molecular weight (MW) and crystallinity of cotton linter need to be controlled to be dissolved well in N-methylmorpholine N-oxide (NMMO) solvent for manufacturing regenerated fibers of clothing fabrics. Electron beam irradiation or sulfuric acid pre-treatment followed by alkaline peroxide bleaching has been used to control MW effectively and to improve brightness of cotton linter. Auto-hydrolysis of cotton linter without electron beam irradiation or chemical pre-treatment was found to be effective as an alternative pre-treatment method. Removal of metal ions, that hampered dissolution of cotton linter by NMMO, was also investigated when the auto-hydrolysis was accompanied with ionic polymers and chelating agent.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.93-97
• /
• 2007

Phenyl styryl ketone ligands 1-5 containing different functional groups were synthesized and attached to the aminated poly (styrene-divinvlbenzene) copolymer through diazotization. The coupling of the ligand with polymer was confirmed by FT-IR. The variation of the uptakes of Pb (II) or Cu (II) ions loaded in the prepared polymers (6-10) was examined at different pH values. An increase of metal uptake in the polymers was observed with the increase in pH value in aqueous solution.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.270-278
• /
• 1991

Carboxymethyl chitin(CM-chitin) was prepared by the reaction of alkali chitin with monochloroacetic acid in isopropyl alcohol. According to the pH variation, the adsorptivity of this chelating polymer to the alkali-earth metal ions such as $Ca^{2+},\;Mg^{2+}$, $Sr^{2+}$, $Ba^{2+}$ ions was determined by batch method. The adsorption tendency of this chelating polymer to most metal ions was increased with the increase of pH. The highest degree of adsorption was observed toward $Ca^{2+}$ ion among the alkali-earth metal ions. The selectivity adsorption property toward $Ca^{2+}$ ion was examined in the solution of $Ca^{2+}$ and $Mg^{2+}$ ions, and it was observed that CM-chitin showed excellent selectivity to $Ca^{2+}$ ion than $Mg^{2+}$ ion. $Mg^{2+}$ ion bound to CM-chitin molecule in the presence of $Ca^{2+}$ ion owing to low equilibrium constant. In the adsorption experiment of $Ca^{2+}$ and $Mg^{2+}$ ions to the CM-chitin under coexistence of $Na^+$ and $K^+$ ions, it observed that adsorptivity of only $Ca^{2+}$ ions was not affected by these monovalent cations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.149-159
• /
• 1994

The kinetics and equilibrium of metal extraction by benzamidoxime and phenylacetamidoxime-chloroform were investigated to apply amidoxime to metal extraction as chelating agent. The overall extraction constant extraction mechanism and selective extraction of copper were examined from the relation among extraction ratio, hydrogen ion concentration and extractant concentration. The experimental rate equation of copper extraction coincided with the theoretical rate equation and was expressed as $R_o=k{\overline{C}}_{HRo}(C_{Mo}/C_{Ho})^{1/2}$. The chemical species extracted was found to the type of ${\overline{CuR_2}}$.