DOI QR코드

DOI QR Code

Abatement of Metal Ion Contents from Cotton Linter for the Manufacture of Regenerated Cellulose

방직용 재생섬유 제조를 위한 면 린터의 금속이온 함량 저감에 관한 연구

  • Park, Hee Jeong (Dept. of Bio-based materials, College of Agriculture and life science, Chungnam National University) ;
  • Son, Ha Neul (Dept. of Bio-based materials, College of Agriculture and life science, Chungnam National University) ;
  • Choi, Jin Sung (Dept. of Bio-based materials, College of Agriculture and life science, Chungnam National University) ;
  • Seo, Yung Bum (Dept. of Bio-based materials, College of Agriculture and life science, Chungnam National University)
  • 박희정 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 손하늘 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 최진성 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 서영범 (충남대학교 농업생명과학대학 환경소재공학과)
  • Received : 2013.11.14
  • Accepted : 2013.12.12
  • Published : 2013.12.30

Abstract

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

Keywords

References

  1. Kim, G. S., and Cha, J. Y., Cellulose and lyocell fibers, Tech. Trend Report, Korea Institute of Science and Technology Information (2003).
  2. Gang, T. J., and Cha, J. Y., Characterization and utilization of cellulose, Biological research information center, Biowave 9(7):1-11 (2007).
  3. Park, Y. C., and Kim, G. J., Cotton cellulose regenerated fiber, Fiber Technology and Industry 14(2):71-77 (2010).
  4. Park, H, J., Han, J. S., Son, H. N., and Seo, Y. B., Study of cotton linter pre-treatment process for producing high quality regenerated fibers for fabrics, Journal of Korea TAPPI 45(3):27-35 (2013). https://doi.org/10.7584/ktappi.2013.45.3.027
  5. Zhang, W., Okubayashi, S., and Thomas, B., Fibrillation tendency of cellulosic fibers: part3. Effects of alkali pretreatment of lyocell fiber, Carbohydrate Polymers 59(2):173-179 (2005). https://doi.org/10.1016/j.carbpol.2004.09.007
  6. Lee, S., Kim, J. W., and Jin, S. H., The effect of chemical crosslinking in alkaline solution on fibrillation tendency and dyeability of lyocell fiber, Journal of the Korean Oil Chemists' Society 27(2):168-174 (2010).
  7. Huong, M. B., Anelise, E., and Thomas, B., Pilling in cellulosic fabrics, Part 2: A study on kinetics of pilling in alkali-treated lyocell fabrics, Journal of Applied Polymer Science 109(6):3696-3703 (2008). https://doi.org/10.1002/app.28570
  8. Lee, S. K., The effect of acid treatment on the removal of metal ions and the improvement of brightness of pulp during hydrogen peroxide bleaching, Master's thesis, Korea University (2004).
  9. Ree, E. T., Segal, L., and Tripp, V. W., The effect of cellulase on the degree of polymerization of cellulose and hydrocellulose, Textile Research Journal 27(8):625-632 (1957).
  10. Park, H. J., Hai, L. V., Han, J. S., Lee, M. W., and Seo, Y. B., Comparison to effect of reducing metal ions from pre-processing methods to make dissolving pulp of cotton linter, Proceeding of Spring conference of Korea TAPPI, pp.5-6 (2013).
  11. Park, D. H., Lee, M. W., Jung, S. Y., and Seo, Y. B., Study of variations of cotton linter pulp characteristics by electron-beam treatment, Proceeding of Spring Conference of Korea TAPPI, pp.157-167 (2011).
  12. Seo, Y. B., Lee, M. W., Park, D. H., and Park, H. J., Use of a low-Energy electron beam for degree of polymerization control of cotton linter, Industrial Engineering Chemistry Research 52(2):692-695 (2013). https://doi.org/10.1021/ie300521w
  13. Park, J. S., Development of electron beam radiation technology to regulate the molecular weight of cellulose materials, Master's thesis, Chungnam University (2011).
  14. Garrote, G., Domiguez, H., and Parajo, J. C., Autohydrolysis of corncob: study of non-isothermal operation for xylooligosaccharide production, Journal of Food Engineering 52(3):211-218 (2002). https://doi.org/10.1016/S0260-8774(01)00108-X