• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1866-1870
• /
• 2019

Residual salt separation is an essential step in pyroprocessing because its reaction products, as prepared by electrochemical unit processes, contain frozen residual electrolyte species, which are generally composed of alkali-metal chloride salts (e.g., LiCl, KCl). In this study, a simple technique that utilizes high-temperature gas flux as a driving force to melt and push out the residual salt in the reaction products was developed. This technique is simple as it only requires the use of a heating gun in combination with a gas injection system. Consequently, $LiNO_3-ZrO_2$ and $LiCl-ZrO_2$ mixtures were successfully separated by the high-temperature gas injection (separation efficiency > 93%), thereby demonstrating the viability of this simple technique for residual salt separation.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.276-281
• /
• 1991

Electrochemical behaviors of optically active sparteine-Cu(II) dihalide complexes were investigated by polarography and cyclic voltammetry (CV). These Cu(II) complexes are rather easier to be reduced to Cu(I) states when comparison is made with other nonplaner copper complexes, We have assigned the CV peaks and polarographic waves related to the redox processes for these complexes. We could also observe the exchange reaction of Cu(II) ion in the complex with mercury metal in the cell having mercury pool. The redox mechanism of these complelxes is as follows; The 1st wave appeared at +0.47 V/+0.65 V corresponds to the reaction of $SpCuX_2+ e{\rightleftarrow}SpCuX_{2^-}$ and the 2nd one at +0.26 V/+0.21 V does the reaction of $SpCuX_{2 ^-} +e{\rightleftarrow}SpCuX_2^{2-}$. The 3rd one at -0.35 V/-0.27 V is dueto the reduction of mercury complex formed via exchange reaction. Where, X is chloride ion.

• Korean Journal of Metals and Materials
• /
• v.49 no.10
• /
• pp.780-789
• /
• 2011

The effects of alloyed carbon on the pitting corrosion, the general corrosion, and the passivity behavior of Fe18Cr10Mn0.4NxC (x=0~0.38 wt%) alloys were investigated by various electrochemical methods and XPS analysis. The alloyed carbon increased the general corrosion resistance of the FeCrMnN matrix. Carbon enhanced the corrosion potential, reduced the metal dissolution rate, and accelerated the hydrogen evolution reaction rate in various acidic solutions. In addition, carbon promoted the pitting corrosion resistance of the matrix in a chloride solution. The alloyed carbon in the matrix increased the chromium content in the passive film, and thus the passive film became more protective.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.531-538
• /
• 1998

The ion selective membrane electrode made of calix[4]arene-based host 1 as ionophore, poly (vinyl chloride) (PVC) as matrix and dioctylsebacate (DOS) as a plasticizer was studied. The potential responses of this membrane electrode to alkali, alkaline earth and transition metal cations were investigated. Especially this membrane electrode was turned out to be affinitive for $Pb^{2+}$ in the deionized water. It was observed that the response was linear in the concentration range from $1.0 \times 10^{-1} M to 1.0 \times 10^{-6} M of Pb^{2+}$ and its slope (26.5 mV/decade) was near to the sub-Nernstian response in deionized water. Also, the potential was maintained constantly in the range of pH $4.00 \sim 12.00$, which supports the potential usage as $Pb^{2+}$ affinitive electrode in the deionized water.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.3
• /
• pp.207-214
• /
• 2006

$Y_{2-x}Gd_xO_3:Eu$, phosphors for plasma display panel(PDP), were prepared by Pechini method which use yttriun chloride, gadolinium chloride, and europium oxide as starting materials. This method is a different way to the synthesis of europium(Eu)-doped phosphors, and it consists of the formation of a polymeric resin obtained by polyesterification between metal chelate compounds and a polyfunctional alcohol. This needs lower temperature than solid-state synthetic method. The prepared $Y_{2-x}Gd_xO_3:Eu$ phosphor particles had spherical shape and coherence. The luminescence intensity of $Y_{2-x}Gd_xO_3:Eu$ phosphor particles increased according to the increase of gadolinium(Gd) content(to 0.8mol%), and $Y_{1.2}Gd_{0.8}O_3:Eu$ phosphors had the highest luminescence intensity under vacuum ultra violet(VUV) excitation. The optimum concentration of Eu in the phosphor and optimum calcination temperature was 3wt% and $1100^{\circ}C$. The prepared phosphors were consist of particle, and its size was between 100nm and 150nm. Among the different polyfunctional alcohols, diethylene glycol(DEG) improved the luminescence intensities of phosphors more than other additives. The Pechini method proved that it is demonstrated to be suitable for the synthesis of phosphors used in PDP.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.177-184
• /
• 1998

The contact angle on powder hydrophobic polymer PMMA(polymethylmethacrylate), PVC(poly vinyl chloride) and hydrophilic metal aluminium was measured by wicking method on the base of Washburn equation for water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol, methanol, and for anionic surfactant SDS(sodium dodecyl sulfate) and cationic surfactant CATB(cetyl trimethylamonium bromide) aqueous solution with concentrations. The values of ${\gamma}_c$ estimated by Zisman plot and adhesion tension plot for contact angle with organic liquids, SDS, and CTAB aqueous solutions were 43.5, 28.3, and $36.2mNm^{-1}$ for PMMA and 44.2, 25.0, and $34.8mNm^{-1}$ for PVC, respectively. From the results, it was considered that wettability and characteristics of solid surface were transformed by adding surfactant. The surface free energy, ${\gamma}_s$ and its components of PMMA, PVC, and aluminium were determined using harmonic equation.

• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.288-295
• /
• 2000

It has been tried to decrease the crosslink density of vulcanized EPDM (ethylone-propylene-diene terpolymer) rubber through a chemical devulcanization treatment. Phase transfer catalyst, alkali metal (i.e., sodium), and triphenylphosphine have been used as a chemical agent ul the devulcanization treatment. Also it has been estimated the effect of the devulcanization treatment in the case of utilization of 2-butanol as a devulcanization reaction solvent. In the devulcanization treatment using quaternary ammonium salt as a phase transfer catalyst. the devulcanization effect has been studied with the variation of catalyst molecular weight and the choice of bromide or chloride cation. In the devulcanization treatment using sodium, it has been estimated the devulcanization treatment effect depending upon the variation of reaction variables such as amount of sodium used, reaction temperature, pressure of hydrogen gas, which is used as a reaction environment. The $M_c$ value (number average molecular weight between two crosslink points) has been experimentally estimated by the equilibrium swelling method and it is quantitatively related to the crosslink density. The estimation of devulcanization effect for vulcanized EPDM rubber has been carried out by the comparison of the $M_c$ values between the untreated and the treated specimens.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.192-193
• /
• 2005

Magnesium thin films were prepared on cold-rolled steel substrates by RF(Radio Frequency) magnetron sputtering technique.$^{1)}$ The crystal orientation and monitoring of the deposited films were investigated by using XRD(X-ray Diffraction) and EIS(Electrochemical Impedance Spectroscopy), respectively. The corrosion rates of Mg thin films deposited with different argon gas pressure and substrate bias voltage were monitored by AC impedance method under a cyclic wet-dry condition, which was conducted by exposure to alternate conditions of 1h immersion in 3%NaCl solution and 5h drying at 60% RH and 25$^{\circ}C$. The result of corrosion rate of Mg thin films deposited at various Ar gas pressures and substrate bias voltage under wet-dry cyclic exposure in chloride-containing solutions was showed the following conclusions. At the region I during the onset of the wet cycle, corrosion rate showed relatively low value. The increase in the Corrosion rate of region II is due to the increase in the chloride concentration. Corrosion rate of region III during the onset of the cycle zero and salt crystals remain on the metal surface.$^{2)}$

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.2
• /
• pp.167-171
• /
• 1994

Ethylcystein dimer (ECD) was synthesized by dimerizatlon of L-thiazolidine-4-carboxylic acid in liquid ammania with sodium metal and successive esterification in ethanolic solution of hydrogen chlorde. The purified product was labeled with $^{99m}Tc$ in the presence of sodium glucarate(pH= 5.6) and stannous chloride. Best result was obtained from the preparation con sisting of 0.1mg ECD, $40{\mu}l$ of 0.4M sodium glucarate (pH=5.6), and $20{\mu}g$ of stannous chloride. The labeling efficiency was 90% with previous condition. The labeled $^{99m}Tc$-ECD was stable at least for 3 hours in PBS(pH=7.4) at room temperature. About 10mCi of $^{99m}Tc$-ECD was injected to normal volunteer, and SPECT image of brain was obtained by triple head camera 10 minutes after inection. The image showed similar distribution of radioactivity in brain with that of HMPAO image.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.203-214
• /
• 1990

A total of 166 strains of Salmonella (S) typhimurium var copenhagen isolated from pigeons (164 strains) and aquatic birds (2 strains) were examined for the biochemical characteristics and plasmid profiles. All the strains were sensitive to ampicillin, chloramphenicol, gentamicin, kanamycin and sulfadimethoxine. But 13 strains(7.8%) were resistant to streptomycin (Sm), 2 (1.2%) to tetracycline, 2 (1.2%) to rifampicin, and 1 (0.6%) to nalidixic acid. Among drug resistant strains, only one strain resistant to Sm contained conjugative R plasmid which was fertility inhibition and incompatibility group $I_{\alpha}$. All the strains were sensitive to cobalt chloride, cupric sulfate, lead nitrate, mercuric chloride and silver nitrate. Of 166 isolates, 6 (3.6%) were resistant to sodium arsenate and 1 (0.6%) to potassium tellurite. Among 166 isolates, 1 (0.6%) was colicinogenic, 12 (7.2%) sucrose fermenters, and 166 (100%) maltose fermenters. Plasmid profiles were confirmed as being 4 or 5 plasmids, and their molecular weight ranged 3.2 to 60 megadalton (MD). All the strains harbored 60 Md plasmid. There are three patterns by the plasmid profile, 150 isolates (90.4%) were pattern I (3.2, 3.5, 33, 60Md), 14 (8.4%) pattern II (3.2, 3.5, 29, 60Md), and 2 (1.2%) pattern III (4.2, 7.8, 8.5, 15, 60Md). S typhimurium var copenhagen strains containing 60Md plasmid were resistant to killing by 90% normal guinea pig serum.