• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2961-2965
• /
• 2012

Mesoporous carbons with tailored pore size were prepared by using sucrose as the carbon source and silicas as the templates. The silica templates were obtained from a hydroxypropyl-${\beta}$-cyclodextrin-silica hybrids using ammonium perchlorate oxidation at different temperatures to remove the organic matter. The structures and surface chemistry properties of these carbon materials were characterized by $N_2$ adsorption, TEM, SEM and FTIR measurements. The catalytic performances of these carbon materials were investigated through the reduction of nitroaromatic using hydrazine hydrate as the reducing agent. Compared with other carbon materials, such as active carbon, and carbon materials from the silica templates obtained by using calcination to remove the organic matter, these carbon materials exhibited much higher catalytic activity, no obvious deactivation was observed after recycling the catalyst four times. Higher surface area and pore volume, and the presence of abundant surface oxygen-containing functional groups, which originate from the special preparation process of carbon material, are likely responsible for the high catalytic property of these mesoporous carbon materials.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.436-442
• /
• 2008

Organic-inorganic hybrid mesoporous anion-exchange resins were prepared for the adsorption of anions from aqueous solutions. The prepared samples were characterized using nitrogen adsorption-desorption measurements, Fourier transform infrared (FTIR) spectroscopy, and elemental analyses. Batch and kinetic experiments were performed to examine the anion-exchange performances of the prepared samples. Among the prepared samples, the hybrid mesoporous anion-exchange resins functionalized with tributylammonium groups showed higher adsorption capacities for perrhenate ions than did the resin functionalized with trimethylammonium groups. The surfactant, hexadecylamine, which had hydrophobic alkyl chains, also showed affinity for hydrophobic perrhenate anions.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.527-531
• /
• 2009

Periodic mesoporous organosilicas (PMO) were synthesized using bis(triethoxy silyl) benzene as the precursor and dodecyl trimethyl ammonium bromide (DTMA) as the templating agent. From these results of XRD, TEM, and NMR, the pore structure of the material was confirmed to have a well-organized hexagonal structure. Poly(ethylene oxide) (PEO) was penetrated into PMO. From the DSC and XRD experiments, the polymer melting transition of crystalline polyethylene oxide (PEO) decreased then finally disappeared. These results prove that the polymer chains penetrate into the PMO channels, and penetrated polymer chains are constrained inside channels of PMO.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.638-645
• /
• 2009

We report the effect of the amount of the mesoporous material, SBA-15, on the basic traits of fully aliphatic polyimides (API). For this purpose, water soluble, fully aliphatic poly(amic acid) triethyl amine salts ($PAA_{(s)}$) were prepared and mixed with various amounts of SBA-15. Fully aliphatic polyimide hybrid composites containing the SBA 15-type mesoporous silica were synthesized successfully from bicyclo [2.2.2] oct-7-ene-2,3,5,6-tetracarboxylic dianhydride and alicyclic diamine, 4,4'-methylene bis(2-methylcyclohexylamine). The structure of the hybrid composites was confirmed by IR spectroscopic analysis. Scanning electron microscopy revealed the morphology of the compounds. The hybrid composites exhibited good thermal stability, reasonable transparency, and a low dielectric constant.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.125-132
• /
• 2018

We studied a simple approach for synthesis of mesoporous Y(M-Y) from commercial zeolite Y precursors by treating of NaOH with $CH_3(CH_2)_{15}N(Br)(CH_3)_3$ as template. The physicochemical properties of the mesoporous zeolites Y were then analyzed using XRD, nitrogen full-isotherms at 77 K, SEM and TEM. The nitrogen adsorption-desorption analysis showed that surface area and pore diameter of synthesized mesoporous zeolite Y(M-Y) were $1072m^2/g$ and ~3.3 nm, respectively. And M-Y was applied for the removal of $Mn^{2+}$ and $Fe^{2+}$ from aqueous solution. This material, which introduces mesoporosity with zeolite Y character, displayed a superior adsorption capacity than commercial zeolite Y when used as an adsorbent for the removal of $Mn^{2+}$ and $Fe^{2+}$.

• Clean Technology
• /
• v.12 no.2
• /
• pp.107-111
• /
• 2006

Two types of mesoporous carbons, CMK-3 and CMK-5, were prepared using mesoporous silica as a removable template, and their hydrogen storage capacities were evaluated. For the purpose of comparison, MWCNT (multi-walled carbon nanotubes) was selected and the adsorption of hydrogen was measured. The amount of hydrogen adsorbed on carbon materials was found to be closely related to the surface areas of carbon samples: The higher the surface area of the carbon material, the larger amount of hydrogen was adsorbed. The hydrogen storage capacity increased in the order of CMK-5 > CMK-3 > MWCNT. In addition, hydrogen storage capacity was greatly enhanced by the Pd-doping onto CMK-5. When the metallic Pd was doped on the carbon material, the adsorption amount of hydrogen via a hydrogen spill-over mechanism was crucial to the hydrogen storage capacity of Pd-doped CMK-5.

• Korean Journal of Materials Research
• /
• v.29 no.3
• /
• pp.167-174
• /
• 2019

To improve the performance of carbon nanofibers as electrode material in electrical double-layer capacitors (EDLCs), we prepare three types of samples with different pore control by electrospinning. The speciments display different surface structures, melting behavior, and electrochemical performance according to the process. Carbon nanofibers with two complex treatment processes show improved performance over the other samples. The mesoporous carbon nanofibers (sample C), which have the optimal conditions, have a high sepecific surface area of $696m^2g^{-1}$, a high average pore diameter of 6.28 nm, and a high mesopore volume ratio of 87.1%. In addition, the electrochemical properties have a high specific capacitance of $110.1F\;g^{-1}$ at a current density of $0.1A\;g^{-1}$ and an excellent cycling stability of 84.8% after 3,000 cycles at a current density of $0.1A\;g^{-1}$. Thus, we explain the improved electrochemical performance by the higher reaction area due to an increased surface area and a faster diffusion path due to the increased volume fraction of the mesopores. Consequently, the mesoporous carbon nanofibers are demonstrated to be a very promising material for use as electrode materials of high-performance EDLCs.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4015-4022
• /
• 2012

Manganese(III) 5-(4-carboxyphenyl)-10,15,20-triphenyl porphyrin chloride (Mn(TCPP)Cl) was grafted through amide bond on silica zeolite Y (HY), zeolite beta ($H{\beta}$) and hexagonal mesoporous silica (HMS). XRD, ICP-AES, $N_2$ physisorption, SEM, TEM, FTIR and thermal analysis were employed to analyse these novel heterogeneous materials. These silica supported catalysts were shown to be used for epoxidation and good shape selectivity was observed. The effect of support structure on catalytic performance was also discussed. The catalytic activity remained when the catalysts were recycled five times. The energy changes about epoxidation of alkenes by $NaIO_4$ and $H_2O_2$ were also computationally calculated to explain the different catalytic efficiency.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.68.2-68
• /
• 2003