• Transactions of the Society of Information Storage Systems
• /
• v.3 no.3
• /
• pp.149-153
• /
• 2007

Perpendicular patterned magnetic media have been regarded as a prime candidate to achieve an ultra-high magnetic recording density of over 1 Tera-bits/$inch^2$. Patterned magnetic media with nanoscale patterns have been fabricated using various nanopatterning technologies. We focused on the two technical issues of nanoinjection molding technology. Firstly, we have investigated a cost-effective method to fabricate metallic stamps. Secondly, we focused on the analysis of nanoinjection molding with passive heating, where the replication of 50 nm nanopillar arrays was successful. The effect of the thermal insulation layer on the replication quality was examined by analytical and experimental methods. Finally, we deposited a magnetic layer on a injection molded nanopillars and measured. Our methodology can provide cost-effective mass-production for patterned magnetic media.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.77-82
• /
• 2022

Due to the recent advent of fast storage media, the memory management system needs to reconsider the configuring of a page unit. In this paper, we analyze the effect of the page size on memory performance as fast storage is adopted. Specifically, we analyze the TLB hit ratio and the page fault ratio as the workload and the page size are varied in desktop and smartphone environments. Our analysis shows that the influence of the page size depends on the system and workload conditions in desktop systems. However, in smartphone systems, the effect of the page size on memory performance is not large, and is not also sensitive to workloads. We expect that the analysis of this paper will be helpful in configuring the page size of given workloads under the system with fast storage media.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.44-49
• /
• 2012

We measured the surface flatness of both sides for refractive media using the transmitted digital holography method. To enhance the accuracy of the result, phase-shifting system was used. With two different phase modulation of reference beam, the phase profile of object can be easily obtained. Thus, we proposed the surface measurement method which can measure large area fast, compared with conventional methods. To guarantee the reliability of obtained result, we compared with Zygo measurement system. With the proposed method, the surface flatness of $3.45{\mu}m$ resolution could be obtained.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.726-734
• /
• 1996

This study was carried oui to find a proper heat storage material and iris container for the thermal energy recovery system of a vehichle. For this purpose, various phenomenon during phase change from solid to liquid and vice versa for three kind material, octahydrate barium hydroxide, naphthalene and acetamide, are experimentally investigated. Also three type material such as pyrex glass, polyethylene and cupper are tested the feasibility as being a container of heat storage material. From this experimental results, $Ba(OH)_2{\cdot}8H_2O$ showed high possibility as good storage media with condition of long life cycle and stable phase change, and cupper was found out as proper container of $Ba(OH)_2{\cdot}8H_2O$.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.37-48
• /
• 2012

These days many DLNA home media network services start in home network area. DLNA networking softwares included in DLNA media devices contains all of server, renderer and controller functions. But a home media device in home media network environment not uses all of DLNA functions but uses only limited functions. Using all of integrated DLNA functions wastes networking and processing resources especially in home media network, because a home media device uses very limited functions. For example, a smart-TV has a main role of playback and a network attached storage has a main role of media content storage. In this paper, we analyze integrated DLNA networking softwares and design DLNA software models representing each home media device so as to utilize device resources efficiently. And we implement DLNA softwares for smart-TV and smart-phone and test resource efficiency.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.155-160
• /
• 2005

In this paper, the channel decoder promising reliable data retrieving in noisy holographic channel has been developed for holographic WORM(write once read many) system. It covers various DSP(digital signal processing) blocks, such as align mark detector, adaptive channel equalizer, modulation decoder and ECC(error correction code) decoder. The specific schemes of DSP are designed to reduce the effect of noises in holographic WORM(H-WORM) system, particularly in prototype of DAEWOO electronics(DEPROTO). For real time data retrieving, the channel decoder is redesigned for FPGA(field programmable gate array) based hardware, where DSP blocks calculate in parallel sense with memory buffers between blocks and controllers for driving peripherals of FPGA. As an input source of the experiments, MPEG2 TS(transport stream) data was used and recorded to DEPROTO system. During retrieving, the CCD(charge coupled device), capturing device of DEPROTO, detects retrieved images and transmits signals of them to the FPGA of hardware channel decoder. Finally, the output data stream of the channel decoder was transferred to the MPEG decoding board for monitoring video signals. The experimental results showed the error corrected BER(bit error rate) of less than $10^{-9}$, from the raw BER of DEPROTO, about $10^{-3}$. With the developed hardware channel decoder, the real-time video demonstration was possible during the experiments. The operating clock of the FPGA was 60 MHz, of which speed was capable of decoding up to 120 mega channel bits per sec.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.185-189
• /
• 2005

We reported here nano-scale electrical phase-change recording in amorphous $Ge_2Sb_2Te_5$ media using an atomic force microscope (AFM) having conducting probes. In recording process, a pulse voltage is applied to the conductive probe that touches the media surface to change locally the electrical resistivity of a film. However, in contact operation, tip/media wear and contamination could major obstacles, which degraded SNR, reproducibility, and lifetime. In order to overcome tip/media wear and contamination in contact mode operation, we adopted the W incorporated diamond-like carbon (W-DLC) films as a protective layer. Optimized mutilayer media were prepared by a hybrid deposition system of PECVD and RF magnetron sputtering. When suitable electrical pulses were applied to media through the conducting probe, it was observed that data bits as small as 25 nm in diameter have been written and read with good reproducibility, which corresponds to a data density of $1 Tbit/inch^2$. We concluded that stable electrical phase-change recording was possible mainly due to W-DLC layer, which played a role not only capping layer but also resistive layer.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.10
• /
• pp.339-346
• /
• 2016

1 person media is becoming the leading trend among several media in the Internet era exploiting the individual desire of showing off. But, the vast accessibility of Internet produces the worry about privacy risk, which concludes in the increasement of closed SNS. In this paper, we propose a system based on PWW (Person Wide Web) where a person is producing a media and share it with other persons. PWW is an information system which consists of a smart-phone, mobile anchors, a standard web document, and his own cloud storage. An information consumer gets the link using his smart-phone from the mobile anchors attached on the objects in the field. The web browser in the smart-phone obtains the web documents designated by the link and presents it. We also explains the 1 person media system based on PWW and presents the example utilized in the field. We compared and analyzed the security factor of the system based on between WWW and PWW, and concluded that PWW is better than WWW in the aspect of security.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1172-1181
• /
• 1997

A militimedia data is a data mixed of formatted data like an audio and video. Multimedia data has characteristics that it need large amount of storage,wide network bandwith andreal time responsibolity. Because of these characteristocs, the VOD server and continous media storage server have a disk stripe structure or disk stripe sructure or disk array structure(RAID).In the parallel disk access system,high-speed play-back of continous media using segment interleavung may not ensure Qos pf other cioents because of the concentrated load within some disks. The load concentration of disks is related to both the number of disks in the system and playback rate of contimous media.In this paper. we describe that high-speed playback scheme,which is independent of the number of disk and plyback rate can be achieved by technique of changing the in-teval of access to segnent location.We show the experimental result of this technique in this pater.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.287-292
• /
• 2001

Multimedia service systems should have efficient capacity to serve the growing clients and new data. In the general streaming services, users can endure the small amount of time delay at the beginning of service. But they want to have good quality of service. A streaming server tries to transfer video files to clients from a repository of files in real time. The server must guarantee concurrent and uninterrupted delivery of each video stream requested from clients. To achieve its purpose, many stream servers adopt multi-processors, sufficient memory, and RAID or SAN in their systems. In this paper, we propose a Linux-based parallel media streaming server. It is superior to the other systems in the storing structure, fault-tolerance, and service capacity. Since this system supports the web interlace, users can operate easily through the www. This system uses unique striping policy to distribute multimedia files into the parallel storage nodes. If a service request occurs, each storage node transmits striped files concurrently to the client. Its performance is better than the single media streaming service because of the parallel architecture.