• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.103-110
• /
• 2014

Sisal fiber, an agricultural resource abundantly available in china, has been used as raw material to prepare activated carbon with high surface area and huge pore volume by chemical activation with zinc chloride. The orthogonal test was designed to investigate the influence of zinc chloride concentration, impregnation ratio, activation temperature and activation time on preparation of activated carbon. Scanning electron micrograph, Thermo-gravimetric, $N_2$-adsorption isotherm, mathematical models such as t-plot, H-K equation, D-R equation and BJH methods were used to characterize the properties of the prepared carbons and the activation mechanism was discussed. The results showed that $ZnCl_2$ changed the pyrolysis process of sisal fiber. Characteristics of activated carbon are: BET surface area was $1628m^2/g$, total pore volume was $1.316m^3/g$ and ratio of mesopore volume to total pore volume up to 94.3%. These results suggest that sisal fiber is an attractive source to prepare mesoporous high-capacity activated carbon by chemical activation with zinc chloride.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.191.2-191.2
• /
• 2014

Cu/ZnO/$Al_2O_3$ is widely used methanol synthesis catalyst at elevated pressures P (50 to 100 bar) and temperatures T (473 to 573 K) using $CO_2$, CO, $H_2$ syngas mixture. Although Cu step and planar defects have been regarded as active sites in this catalyst, detailed $CO_2$ hydrogenation procedure has been still unknown and debated as well as initial intermediate. In this study, we investigated the mechanism of $CO_2$ hydrogenation on Cu(111) model surface at P (1 bar) and T (298 to 450 K) using reflection absorption infrared spectroscopy (RAIRS). Two distinct formates by hydrogenation of $CO_2$, on step and on terrace, show different behavior with elevating temperature. The peak intensity of on step formate was continuously decreased above 360 K up to 450K in contrast to the increase of on terrace formate. These phenomena are strong possibilities that the formate is initial intermediate and is desorbed by hydrogenation reaction because thermal desorption temperature of formate (~470 K) is much higher than desorption of on step formate. And the formate production peak of on step site was weakly correlated with CO formation.

• Advances in environmental research
• /
• v.4 no.1
• /
• pp.25-38
• /
• 2015

Wastewaters of textile industry cause high volume colour and harmful substance pollutions. Photocatalytic degradation is a method which gives opportunity of reduction of organic pollutants such as dye containing wastewaters. In this study, photocatalytic degradation of C.I. Basic Yellow 28 (BY28) as a model dye contaminant was carried out using Degussa P25 in a photocatalytic reactor. The experiments were followed out at three different azo dye concentrations in a reactor equipped UV-A lamp (365 nm) as a light source. Azo dye removal efficiencies were examined with total organic carbon and UV-vis measurements. As a result of experiments, maximum degradation efficiency was obtained as 100% at BY28 concentration of $50mgL^{-1}$ for the reaction time of 2.5 h. The photodegradation of BY28 was described by a pseudo-first-order kinetic model modified with the langmuir-Hinshelwood mechanism. The adsorption equilibrium constant and the rate constant of the surface reaction were calculated as $K_{dye}=6.689{\cdot}10^{-2}L\;mg^{-1}$ and $k_c=0.599mg\;L^{-1}min^{-1}$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.339-339
• /
• 2010

The metallic nanoparticles (Pt, Au, Ag. Cu, etc.) supported on ceria-titania mixed oxide exhibit a high catalytic activity for the water gas shift reaction ($H_2O\;+\;CO\;{\leftrightarrow}\;H_2\;+\;CO_2$) and the CO oxidation ($O_2\;+\;2CO\;{\leftrightarrow}\;2CO_2$). It has been speculated that the high catalytic activity is related to the easy exchange of the oxidation states of ceria ($Ce^{3+}$ and $Ce^{4+}$) on titania, but very little is known about the ceria titanium interaction, the growth mode of metal on ceria titania complex, and the reaction mechanism. In this work, the growth of $CeO_x$ and Au/$CeO_x$ on rutile $TiO_2$(110) have been investigated by Scanning Tunneling Microscopy (STM), Photoelectron Spectroscopy (PES), and DFT calculation. In the $CeO_x/TiO_2$(110) systems, the titania substrate imposes on the ceria nanoparticles non-typical coordination modes, favoring a $Ce^{3+}$ oxidation state and enhancing their chemical activity. The deposition of metal on a $CeO_x/TiO_2$(110) substrate generates much smaller nanoparticles with an extremely high activity. We proposed a mechanism that there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.400-405
• /
• 2011

ZnO nanotube arrays were synthesized by a two-step process: electrodeposition and selective dissolution. In the first step, ZnO nanorod arrays were grown on an Au/Si substrate by using a homemade electrodeposition system. ZnO nanorod arrays were then selectively dissolved in an etching solution composed of 0.125 M NaOH, resulting in hollow ZnO nanotube arrays. It is suggested that the formation mechanism of the ZnO nanotube arrays might be attributed to the preferred surface adsorption of hydroxide ion ($OH^{-1}$) on a positive polar surface followed by selective dissolution of the metastable Zn-terminated ZnO (0001) polar surface caused by the difference in the surface energy per unit area between the ZnO nanorod and nanotube.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.70-78
• /
• 1998

Dissipation, adsorption and desorption of oxadiazon were examined in two soils containing different amounts of soil organic matter. In addition, reactivity of oxadiazon with humic monomers was searched to clarify binding mechanism of oxadiazon to soil organic matter in the presence of a laccase of Myceliophthera thermophila. Half lives of oxadiazon were 38 days in Soil I and 45 days in Soil II. Freundlich constant, k values of fresh soils were higher than those of oxidized soils. Adsorption rates of oxadiazon were increased 17.1% in Soil I and 9.3% in Soil II in the presence of a laccase but no significant increase was observed in oxidized soils. Desorption rates of oxadiazon in fresh soils were lower than those in oxidized soils. Desorption rates of adsorbed oxadiazon in soils addes with the enzyme were not changed in oxidized soils but decreased in fresh soils. The herbicide oxadiazon alone underwent no transformation by a laccase but in the presence of catechol, guaiacol and gallic acid as humic monomer, transformation rates of it were from 20% to 24%.

• Journal of Radiation Industry
• /
• v.18 no.3
• /
• pp.167-171
• /
• 2024

Technetium-99 (⁹⁹Tc) is recognized as a critical concern in the disposal of spent nuclear fuel due to its long half-life and remarkable stability, existing predominantly as TcO₄^- in the natural environment. The anionic form of technetium is highly soluble and mobile, posing significant environmental risks from the viewpoint of nuclear waste management. Thus, developing efficient and cost-effective sorbents for aqueous Tc(VII) is essential for mitigating relevant contamination. In the present work, the adsorption characteristics of Re(VII), a chemical analog of Tc(VII), were investigated using the clay mineral bentonite, modified with two different organic cations: hexadecylpyridinium (HDPy) and hexadecyltrimethylammonium (HDTMA). Sorption experiments were conducted at a liquid-to-solid ratio of 1 g/L with Re(VII) solutions prepared at concentrations from 10^-4 mol/L to 10^-6 mol/L. The sorption ratio and distribution coefficients were determined with samples collected at reaction times of 10, 50, 100, and 500 minutes after 0.45 ㎛ syringe filtration. In parallel, the modified bentonite samples were further analyzed using the X-ray diffraction (XRD) method to understand the adsorption mechanism of Re(VII) onto the target minerals. According to the quantification analysis results, a rapid equilibrium reaction of aqueous Re(VII) for all modified bentonite samples was identified. Moreover, near-complete adsorption of Re(VII) was observed when the bentonite was modified at 200-400% of its cation exchange capacity (CEC) for both organic cations. For cases of lower modification, the HDTMA-modified bentonite showed relatively higher adsorption efficiency compared with the one modified with HDPy. This result was inferred to be due to the difference in inter-layer spacing based on the characteristics of the organic cations. It is expected that the results obtained through this study will serve as a preliminary case for the synthesis of adsorbents for the retardation of highly mobile anionic radionuclides, such as I and Tc, in the natural environment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.65-72
• /
• 2003

Adsorption and desorption characteristics of methyl iodide at high temperature conditions up to 25$0^{\circ}C$ by TEDA-impregnated activated carbon and silver-ion exchanged zeolite(AgX-10), which are used for radioiodine retention in nuclear facility, were experimentally evaluated. In the range of temperature from 3$0^{\circ}C$ to 25$0^{\circ}C$, the adsorption capacity of base activated carbon decreased sharply with increasing temperature but that of TEDA-impregnated activated carbon showed higher value even at high temperature ranges. Especially, the residual amount of methyl iodide after desorption on TEDA-AC represented 30% lower value than that on AgX-10. However, it can be used as an adsorbent for the removal of methyl iodide up to 15$0^{\circ}C$ if it is preventing explosion by Ignition. The breakthrough curves of methyl iodide in the fixed bed packed with AgX-10 uP to 40$0^{\circ}C$ were compared upon the effects of bed temperatures, bed depth and input concentration of methyl iodide. Removal mechanism of methyl iodide on AgX-10 was proposed, based on the analysis of by-product gas generated from adsorption reaction.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.256-264
• /
• 2004

Adsorption characteristics of three endocrine disruptors, amitrol, nonylphenol, and bisphenol-A, were evaluated depending on the type and service duration of activated carbon (AC). Bituminous coal-, wood-, and coconut-based coals were tested. Bituminous coal-based AC (BCAC) had the greatest sorption capacity for the three chemicals tested, followed by wood-based AC (WAC) for nonylphenol and coconut palm-based AC (CAC) for bisphenol-A. During the column test, amitrol removal efficiency increased over time, indicating that hydrophilic endocrine disruptors are biodegraded in the AC column. Removal efficiencies of hydrophobic compounds such as nonylphenol and bisphenol-A decreased over time since the main removal mechanism was adsorption. The order of the amitrol removal was: BCAC-5.9 yr, CAC-3.l yr > BCAC-2.2 yr > BCAC-virgin > CAC-virgin > WAC-virgin > WAC-3.l yr. In general, used AC had greater removals than virgin AC. The order of the bisphenol-A removal was: CAC-virgin > BCAC-2.2 yr > CAC-3.l yr > WAC-virgin > BCAC-5.9 yr > WAC-3.l yr. The order of the nonylphenol removal was: BCAC-virgin > WAC-virgin > CAC-3.1 yr, WAC-3.1yr> BCAC-2.2 yr > BCAC-5.9 yr > CAC-3.1 yr. Bituminous coal AC performed the best over time. Endocrine disruptors such as these three compounds appear to be removed effectively by activated carbon through biodegradation and adsorption. Wood and coal based among the virgin ACs and 3.1 years used wood base among the used ACs appeared the lowest carbon usage rate(CUR) for nonylphenol removal by prediction model. Virgin and used coconut base ACs except BCAC had the lowest CUR for removal Bisphenol-A. Biodegradation of nonylphenol and Bisphenol-A did not occurred during the 9,800 bed volume experiment period. BCAC had the highest biodegradation capacity of 46% for amitrol among virgin ACs and the used coal based ACs had 33-44% higher biodegradation capacity than virgin's for amitrol so biodegradation is the effective removal technology for hydrophilic material such as amitrol.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.318-324
• /
• 2017

We evaluated geosmin and MIB biodegradation and adsorption mechanism of biological activated carbon (BAC) and anthracite biofilter. In steady state of BAC process, the geosmin and MIB were completely removed at the 30 min empty bed contact time (EBCT) even though low water temperature ($9^{\circ}C$) in which the activity of attached bacteria decreased. When the water temperature was $26^{\circ}C$, the microbial biomass and activity were higher at the upper layer of the biofilm than at $9^{\circ}C$, and the microbial biomass and activity decreased as the depth was deeper. This is because when the water temperature is high, the biodegradable organic matter (BOM) removal rate in the upper layer is high and the BOM amount that can't be supplied to the lower layer. The Removal rate of geosmin and MIB by BAC process did not show a significant difference compare to activity-inhibited BAC by treated with azide and the biofilter also removed the geosmin and MIB by biological action. It means geosmin and MIB could be removed by competitive relationship between adsorption and biodegradation.