• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2105-2113
• /
• 1995

The compressive tests under impact conditions were performed to establish a design guide for impact damage tolerance. The composition of layup was selected for the real cases of composite aircraft structure. The energy level of visible of visible damage threshold was determined as 7 Joules. It was found that the normalized bending stiffnesses in the direction of closely fixed boundary affected the area of damage. Graphite/epoxy used in the tests exhibited 60% reduction in compression strength at the energy level of visible damage threshold. Wet-conditioned specimens represented 9% reduction in residual compressive strength in comparison with room temperature ambient specimens. In this study, a design factor of 2.1 was proposed for the low velocity impact damage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.722-727
• /
• 2006

Bone fracture healing is one of the important topics in biomechanics, demanding computation simulations due to the difficulty of obtaining experimental or clinical results. In this study, we adopt the design space optimization method which was established by the authors as a tool for the simulation of bone growth using its evolutionary characteristics. As the mechanical stimulus, strain energy density is used. We assume that bone tissues over a threshold strain energy density will be differentiated and bone tissues below another threshold will be resorbed. Under compression and torsion as loadings, the filling process of the defect is well illustrated following the given mechanical criterion. It is shown that the design space optimization is an excellent tool for simulating the evolutionary process of bone growth, which has not been possible otherwise.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1483-1491
• /
• 2001

Enhancement of pulsed-laser ablation by an artificially deposited liquid film is presented. Measurements of ablation rate, ablation threshold, and surface topography arc performed. Correlation between material ablation and photoacoustic effect is examined by the optical beam deflection method. The dependence of ablation rate on liquid-film thickness and chemical composition is also examined. The results indicate that photomechanical effect in the phase explosion of liquid is responsible for the enhanced ablation. The low critical temperature of liquid induces explosive vaporization with localized photoacoustic excitation in the superheat limit and increases the ablation efficiency. Experiments were carried out utilizing a Q-swiched Nd:YAG laser at near-threshold laser fluences with negligible plasma effect (up to ∼100 MW/cm$^2$).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.671-674
• /
• 2009

In this work, high-aspect-ratio graphite nanofibers (GNFs) were used to improve the electrical, thermal, and mechanical properties of the poly(methyl methacrylate) (PMMA) polymer, as well as those of PMMA composites suitable for use in bipolar plates. In the result, an electrical percolation threshold for the composites was formed between 1 and 2 wt% GNF content. This threshold was found to be influenced strongly by the three separate stages of the meltblending process. The composites exhibited higher thermal and mechanical properties and lower thermal shrinkage compared with the neat PMMA. Thus, GNFs were demonstrated to have positive impacts on the thermo-mechanical properties of PMMA composites and showed, thereby, reasonable potential for use in composites employed in the fabrication of bipolar plates.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.182-189
• /
• 1993

To improve the resolution of complex flow field features, grid adaptation scheme of Anderson has been revised, which was based on the Poisson grid generator of Thompson. Anderson's original scheme adapts the grid to solution automatically, but if flow field is more or less complex, then the adaptivity is weak. So the technique of using threshold which is used in unstructured grid system is adopted. The regions of large variation in the solution are marked by marking function which has the property of total variation of the solution, and these regions have same values of weight but other regions are neglected. This updated method captures shocks clearly and sharpy. Four examples are demonstrated, (1) Hypersonic flow past a blunt body, (2) High speed inlet analysis, (3) Supersonic flow of M=1.4 over a 4% biconvex airfoil in a channel, (4) Hypersonic shock-on-shock interaction at M=8.03.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.601-606
• /
• 2016

In this study, in order to analyze the low-temperature sintering process of silver and copper nanoparticles, we calculate their melting temperatures and surface melting temperatures with respect to particle size. For this calculation, we introduce the concept of mean-squared displacement of the atom proposed by Shi (1994). Using a parameter defined by the vibrational component of melting entropy, we readily obtained the surface and bulk melting temperatures of copper and silver nanoparticles. We also calculated the absorption cross-section of nanoparticles for variation in the wavelength of light. By using the calculated absorption cross-section of the nanoparticles at the melting temperature, we obtained the laser threshold energy for the sintering process with respect to particle size and wavelength of laser. We found that the absorption cross-section of silver nanoparticles has a resonant peak at a wavelength of close to 350 nm, yielding the lowest threshold energy. We calculated the intensity distribution around the nanoparticles using the finite-difference time-domain method and confirmed the resonant excitation of silver nanoparticles near the wavelength of the resonant peak.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.1
• /
• pp.45-50
• /
• 2006

Melittin-induced pain model has been known to be very useful for the study of pain mechanism. Melittin-induced nociceptive responses are reported to be modulated by the changes in the activity of excitatory amino acid receptor, calcium channel, spinal serotonin receptor and extracellular signaling-regulated kinase. The present study was undertaken to investigate the role of cyclooxygenase (COX) in the melittin-induced nociception. Changes in mechanical threshold, flinchings and paw thickness were measured before and after intraplantar injection of melittin in the rat hind paw. Also studied were the effects of intraperitonealy administered diclofenac (25 mg & 50 mg/kg), piroxicam (10 mg & 20 mg/kg) and meloxicam (10 mg & 20 mg/kg) on the melittin-induced nociceptions. Intraplantar injection of melittin caused marked reduction of mechanical threshold that was dose-dependently attenuated by non-selective COX inhibitor (diclofenac) and selective COX-1 inhibitor (piroxicam), but not by COX-2 inhibitor (meloxicam). Melittin-induced flinchings were strongly suppressed by non-selective COX and COX-1 inhibitor, but not by COX-2 inhibitor. None of the COX inhibitors had inhibitory effects on melittin-induced increase of paw thickness (edema). These experimental findings suggest that COX-1 plays an important role in the melittin-induced nociceptive responses.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2007

In this study, the influence of compressive residual stress and corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3+3%HF,\;6%FeCl_3$. The immersion period was performed for 90days. The fatigue characterization of a spring steel with processed shot peening were performed by considering the several corrosion environments in the range of stress ratio of 0.05 by means of opening mode displacement. By using the methods mentioned above, the following conclusions have been drawn: The fatigue life shows more improvement in the shot peened material than that in the un peened material. And the fatigue life shows improvement in ambient than in corrosion conditions. Threshold stress intensity factor range of the shot peened materials has higher than of the un peened materials. And the threshold stress intensity factor range was decreased in corrosion environments over ambient.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.615-620
• /
• 2018

Evaluation of clinical usefulness of current perception threshold test and vibration sense perception threshold test in diagnosing the diabetic poly-neuropathy patients is one of the diagnosis methods for diabetic poly-neuropathy. Up to the present, some diagnostic methods were used for diabetic poly neuropathy patients. For example, there are neuropathy impairment score test of lower limbs, nerve conduction test, cooling detection threshold test, heat-pain threshold test and so on. However, most of the above tests require very expensive cost and take a lot of time in test. In this paper, a new apparatus estimating vibration sense ability is introduced. For this purpose, the VCM(voice coil motor) stimulating patient's peripheral nerve and current amplifier were manufactured. Also, softwares sensing and driving the vibration detection threshold test in order to measure the quantitative vibration sensory levels in diabetic poly-neuropathy patients were developed.

• Journal of Oral Medicine and Pain
• /
• v.47 no.2
• /
• pp.87-94
• /
• 2022

Purpose: This study aimed to evaluate the differences between clinical and quantitative sensory testing (QST) results among persistent idiopathic dentoalveolar pain (PIDP), inflammatory dental pain, and control group subjects to identify discriminative clinical features for differential diagnosis. Methods: Thirty-three patients (5 PIDP-a without surgical procedures 10 PIDP-b with surgical procedures, 8 dental pain patients, and 10 controls) were evaluated for clinical features and QST results. Cold pain threshold, heat pain threshold, mechanical pain threshold (MPT), mechanical pain sensitivity, and pressure pain threshold (PPT) were performed. Psychological factors were assessed using Symptom Checklist-90-Revision (SCL-90-R) and a chart review was conducted to evaluate additional discriminative clinical features such as pain quality and treatment prognosis. Results: The dental pain group had lower PPT than the PIDP-b and the control group. The PIDP-a group showed higher MPT and PPT than the PIDP-b and dental pain group but the difference was not statistically significant. Differences in SCL-90-R SOM (Somatization), O-C (obsessive-compulsive), ANX (anxiety), and PSY (Psychoticism) values were statistically significant among groups. PIDP-a and PIDP-b groups showed remaining symptoms after treatment and the pain tended to spread widely, whereas, in toothache patients, symptoms disappeared after treatment. However, factors that confound the diagnosis, such as an increase in pain during chewing and a decrease in the pain threshold at the affected site, could also be identified. Conclusions: PIDP and dental pain groups have distinct clinical symptoms, but there are also factors that cause confusing in diagnosis. Therefore, various clinical examination results should be carefully reviewed and comprehensively evaluated in the differential diagnosis process.