• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.81-88
• /
• 1976

A flash method for measuring the unknown thermal property (the density, specific heat, or thermal diffusivity could be chosen as unknown) is described. The thermal diffusivity of UO$_2$ fuel samples is obtained from room temperature (300 K) to high temperature (1400 K). The specific heat is measured using a commercially available differential scanning calorimeter from room temperature to 500 K. The thermal conductivity of UO$_2$ fuel samples is calculated from the density, thermal diffusivity, and specific heat at constant pressure. The present results are in complete agreement with the usual trends for the thermal conductivity of dielectric materials, in which impurity levels are very important at low temperatures but become relatively unimportant at high temperatures. In addition, the thermal diffusivity values at room temperature are reexamined by measuring the thermal diffusivity of several UO$_2$ fuel samples with same level of doped Gd$_2$O$_3$.

• Journal of Technologic Dentistry
• /
• v.37 no.1
• /
• pp.17-21
• /
• 2015

Purpose: In this study, Spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Methods: Examine the spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Also, by measuring the adhesive strength according to the amount of saliva, and the edentulous patients using denture adhesive and dry mouth patients attempt to provide clinical information of the denture adhesive. Therefore, by using the relatively low shrinkage cold curing resin, after fabricating specimen of plate form, for 7 days, it was immersed in water. Results: For the control group only denture adhesive, an artificial saliva for the experimental group were injected in $0.1m{\ell}$, $0.2m{\ell}$ and $0.3m{\ell}$ of the denture adhesive on the surface, experimental results of the investigation of the 10 times the tensile bond strength of the specimens in each group was obtained the following results. Conclusion: As the time to pressure increase in the same amount of saliva was found that the amount coming out of the denture adhesive, as the amount of saliva in the same pressure increase coming out of many denture adhesives. And the greater the pressure came out a lot of denture adhesives. Spreadability in measuring saliva contact with $0.1m{\ell}$ and $2m{\ell}$ and $3m{\ell}$ group pressured the diameter of the circular was the denture adhesive is small when compared to the group without adding the pressure of 2kg and 3kg put the saliva. The size of the circle is the same amount of saliva denture adhesive spread more pressure showed a greater increase.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.402-408
• /
• 2021

GNSS-Reflectometry (GNSS-R) is a technique for measuring and analyzing signals transmitted from satellites, reflecting on the surface of land or sea. GNSS-R is mainly used for measuring the water level variation, typhoon and meteorological anomaly, soil moisture, and snow depth. This paper describes the concept and measurement principle of GNSS-R technology, especially focusing on the field of marine utilization and its feasibility. In particular, it presents the applications of this technique for monitoring the safety of marine environment as well as the marine vessel and their utilization areas based on currently available infrastructure on the ground and maritime reference stations, such as the existing differential GNSS reference stations and integrity monitors (DGNSS RSIM), and GNSS reference station infrastructure, using the ground-based and the satellite-based GNSS-R approaches.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.27-36
• /
• 2018

Financial IT evaluation methods have been unable to satisfy firms' requirements. There has been a growing demand for more comprehensively and non-financially measuring the IT performance. We developed a process-based approach in evaluating impacts of IT on primary activities. In this research we proposed a model that uses the corporate objective of IT and strategic fitt as the core independent variables in measuring the IT effect. Based on the data collected from the management variables of the 125 companies located in Korea, the companies were classified into the 4 different groups according to their corporate objective for IT: un-oriented, operations oriented, market oriented and dual oriented. Through the empirical analysis, we were able to demonstrate that the management of the companies showing a higher orientation level perceives a better IT investment performance, and this shows that the corporate objective for IT serves as a useful index for measuring the IT investment effect. In this research, it was also demonstrated that the strategic alignment has a positive influence on perceiving the IT investment effect.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.755-762
• /
• 2023

The reliability of measuring instruments is essential in measuring cosmic radiation. To demonstrate this importance, this study measured and compared the amount of cosmic radiation using Liulin and TEPC, operated in South Korea, on a flight between Incheon, South Korea and LA, the US. In addition, since prior analysis based on a prediction program is necessary in advance to check the dose of cosmic radiation, this study utilized KREAM developed in Korea and the CARI-6M developed by the FAA to acquire the predicted value. As a result of the verification, the reliability of the two devices falls within the acceptable level of 20%, proving the reliability. Moreover, the differences between the values acquired by each prediction program were only subtle. Nevertheless, the analysis demonstrated that the prediction value obtained by the programs and the measured value had significant differences. Therefore, additional correction of the discrepancies or continuous research for such is required to match the predicted values are similar to the actual measured values.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.255-255
• /
• 2002

For rapid and sensitive measurement of antiviral activities, application of a recombinant virus containing firefly luciferase gene was attempted. Recombinant human cytomegalovirus (HCMV) containing luciferase gene driven by HCMV late gene pp28 promoter (HCMV/pp28-luc) was used to test the antiviral activities of three known compounds and the result was compared with results from the conventional plaque assay for measuring the production of infectious viruses. When human fibroblast cells were infected with HCMV/pp28-luc, luciferase activity was observed at 2 days after infection and reached maximum at 6 days after infection, whereas the production of infectious virus was maximal at 4 days after infection. The antiviral activities of ganciclovir, acyclovir, and papaverine were measured in HFF cells infected with HCMV/PP28-luc and the luciferase activity was compared with the infectious virus titers. Luciferase activity decreased as the concentration of ganciclovir or papaverine increased, while there was a slight decrease in luciferase activity with acyclovir. The level of the decrease in Luciferase activity was comparable to the level of decrease in the production of infectious virus. Therefore, the antiviral assay using recombinant virus HCMV/pp28-luc resulted in sensitivity similar to the conventional plaque assay with a significant reduction in assay time.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.81-92
• /
• 2021

Purpose: The aim of the study is to measure the quality of cardiopulmonary resuscitation (CPR) and the fatigue of rescuers wearing PPE (Level D) during a CPR session and to ultimately provide suggestions of safety standards for rescuers. Methods: 36 subjects were enrolled in the study. The subjects were divided randomly into three groups of two-members, three-members, and four-members. Each group performed CPR for 30 minutes. Blood lactate concentration, heart rate, rating of perceived exertion, chest compression depth and rate were measured before experiment and after each cycle. Results: There was a difference in the blood lactate concentration during CPR cycle by member of shifts (p=.014). The blood lactate concentration increased during CPR (p=.000). Subjective fatigue was a significant difference of chest compression in cycles 3, 4, and 5 for the member of shifts during CPR (p=.049, p=.009, p=.015). Depth and rate of chest compression were not different for the member of shifts during CPR. Conclusion: It is necessary to establish standards for the member of shifts during CPR, to reduce the fatigue of rescuers.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• The Journal of Society for e-Business Studies
• /
• v.25 no.3
• /
• pp.109-130
• /
• 2020

Recently, the importance of research and development for technological innovation is increasing. The rapid development of research and development has a number of positive effects, but at the same time there are also negative effects that accelerate crimes of information and technology leakage. In this study, a research security level measurement model was developed that can safely protect the R&D environment conducted at the organizational level in order to prepare for the increasingly serious R&D result leakage accident. First, by analyzing and synthesizing security policies related to domestic and overseas R&D, 10 research security level evaluation items (Research Security Promotion System, Research Facility and Equipment Security, Electronic Information Security, Major Research Information Security Management, Research Note Security Management, Patent/Intellectual Property Security Management, Technology Commercialization Security Management, Internal Researcher Security Management, Authorized Third Party Researcher Security Management, External Researcher Security Management) were derived through expert interviews. Next, the research security level evaluation model was designed so that the derived research security level evaluation items can be applied to the organization's research and development environment from a multidimensional perspective. Finally, the validity of the model was verified, and the level of research security was evaluated by applying a pilot target to the organizations that actually conduct R&D. The research security level evaluation model developed in this study is expected to be useful for appropriately measuring the security level of organizations and projects that are actually conducting R&D. It is believed that it will be helpful in establishing a research security system and preparing security management measures. In addition, it is expected that stable and effective results of R&D investments can be achieved by safely carrying out R&D at the project level as well as improving the security of the organization performing R&D.

• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.119-166
• /
• 2019

The risk of electromagnetic field(EMF) from power lines has been heavily disputed whenever high-voltage power line towers were built in South Korea. Local communities and civic groups had regarded burying the lines in the ground as an alternative to building power line towers. In 2014, however, when an elementary school science teacher reported the results of EMF measurements over the underground power lines to the Asian Citizens' Center for Environment and Health (ACCEH), the risk controversy over underground power lines took a whole new turn. The level of EMF from underground power lines turned out to be higher, and therefore more harmful than that from power line towers. In the debates that took place from then on over the EMF risk, ACCEH and NIER(National Institute of Environmental Research) presented conflicting topographies of EMF risk. This paper examines measuring practices of ACCEH and NIER by analyzing the measuring sites, measuring devices, and measuring heights chosen by each organization. This paper further examines how ACCEH and NIER mobilized various standards(EMF exposure limit, measurement guideline, categorization of carcinogens) differently. This controversy on the EMF from underground power lines of Seoul has raised concerns on the non-thermal effects of EMF in the long-term exposure and has led people to question whether burying the power lines is the safe alternative to building power line towers. Furthermore, this suggests conflicting answers on whether Seoul, where 90 % of transmission lines were already buried, is a safely managed place or not.