• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.690-695
• /
• 2004

A new dimension measuring method for the measurement of diameter of an object has been developed using laser triangulation. The 3-D data of an object was calculated from the 2dimensional image information obtained by the laser stripe using the laser triangulation. The system can measure the diameter of hole not only in a normal plane but also in an incline plane. We can experiment with magnification that is optimized according to size of object using zoom lens. In this paper, the theoretical formula and calibration of the system were described. The measuring precision of the system was investigated by experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.239-242
• /
• 2000

The purpose of this paper is to establish an effective inspection system by using OMM(ON-Machine Measurement) system. This allows us to reduce the manufacturing lead time by separating the inspection process from manufacturing system. As a first step, the inspection process planning is accomplished by determining the number of measuring points, their locations, measuring path and their sequence. Subsequently, we generate measuring G-codes to be transferred to the machining center through RS232C, and then the inspection process will be performed for each shape. Analysing obtained measuring data, the dimensional tolerance will be validated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.621-628
• /
• 2000

A kinematic ball bar measuring system can analyze the various errors of a machine tool easil rapidly with only one measurement, But it cannot be used to measure the errors of the equipment the semiconductor manufacturing (e.g. chip mounter, PCB router etc.) not to use a cir interpolation. This paper presents the method to apply a kinematic ball bar measuring system tc machines which use merely a linear interpolation Also, the work of measuring and calibratir various errors of a chip mounter with a kinematic bal1 bar measurement system is accomplished

• 항공우주시스템공학회지
• /
• 제3권3호
• /
• pp.13-16
• /
• 2009

Aircraft flight control surfaces which are one of the most important elements of safety allow a pilot to adjust and control the aircraft's flight attitude. This paper is described of the control surface deflection angle measuring device. Data analysis through ground test and flight test can provide reliability of this device using the present system. It is also shown that measuring system is capable of detecting failure of control surfaces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1509-1510
• /
• 2006

ERA PD measuring system has been using for partial discharge evaluation of power appratus in test laboratories. So, the measurement uncertainty of PD measuring system (ERA), such as PD pulse calibrator rise and fall time, sacle factor(k) and linearity, transfer impedance etc, is very important factor of test result in test laboratory. In this paper, we describe tracebility and uncertainty improvement of PD measuring system in test laboratory based on IEC 60270.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.566-568
• /
• 1993

A measuring technique for the fast transient high voltage is under development by use of laser source in order to substitute for the conventional measuring system which could bring about several technical inconveniences. At this moment, this work is aimed to construct a compact measuring system with the use of Pockels cell and specially designed voltage divider. This system is likely to enable us to measure the lightening impulse voltages at the level of 30kV, 50kV and 70kV. Throughout this work, qualified measuring devices are required to be developed for discriminating different kinds of noise from which the system should be protected.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.69-75
• /
• 2002

This study investigated the effect of the system parameters on penetration depth measurement using infrared temperature sensing system. The distance from focusing lens to detector was varied to diminish the error in measuring weld bead width. The effect of bead surface shape on measured surface temperature profile was evaluated using specimen heated by electric resistance. The measuring distance from laser beam was changed to optimize the measuring point. The results indicated that the monitoring device of surface temperature using infrared detector array was applicable to real time penetration depth control.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.399-404
• /
• 1996

We developed a non-contact shape measuring device using computer image processing technology. We present a method of calibrating a CCD video camera and a laser range finder which is the most important step toward making an accurate shape measuring system. An artificial neural network is used for the calibration. Our measurement system is composed of a semiconductor laser. a CCD video camera, a personal computer, and a linear motion table. We think that the developed system could be used for measuring the change in shape of the spent nuclear fuel rod before and after irradiation which is one of the most important tasks for developing a better nuclear fuel. A radiation shield is suggested for the possible utilization of the range finder in radioactive environment.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.86-94
• /
• 1993

In heavy industries forces which are exceeding the range of available force standard machines have to be measured. Force measuring system using build-up procedure can be applied to measure large forces efficiently. In this study strain gage type force sensors are designed and fabricated, and the build-up force measuring system with 4.5 MN capacity using the developed force sensors is 0.03% or less over the range of 600 kN .approx. 1.5 MN and the force measuring system is less than 0.06% or less over the range of 500 kN .approx. 4.5 MN.

• 한국멀티미디어학회논문지
• /
• 제11권10호
• /
• pp.1366-1375
• /
• 2008

계측기 장비들을 검증하기 위해서는 원기를 보유하고 있는 인증기관에 의뢰하여 장비의 이상유무를 검증 받게 된다. 디지털 계측기 같은 고가의 장비를 보유하고 있는 기업에게 이런 검증과정은 시간과 비용을 가져온다. 본 연구에서 제안한 '계측기-스마트 네트워크 카드 모델'은 디지털 계측기에 스마트 네트워크 모듈을 탑재하는데, 이 카드는 기존의 웹 어댑터에 원격지에서 프로그램을 적재, 삭제, 실행이 가능하도록 스마트 기능을 추가하여 원격검증 및 제어가 가능하다. 제안한 모델은 다수의 프로그램이 적재 가능하여 응용가치 또한 높으며, 국내외로 판매한 고가의 디지털 계측기 하나하나를 인터넷을 이용하여 원격제어가 가능하게 하고, 원격으로 검증 조건을 교체할 수 있도록 함으로써, 장비의 질과 경쟁력을 높일 수 있다.