본 연구에서는 전도성 직물을 기반으로 동작 센서로 구현하여 팔의 굽힘, 폄 동작에 따른 센서의 전기저항의 변화를 측정, 분석함으로써 관절 동작을 효과적으로 측정 할 수 있는 직물 센서의 요건을 탐색하였다. 이를 위해 두 가지 편직물인 'L'직물과 'W'직물 양면에 Single Wall Carbon Nano-Tube(SWCNT) 코팅을 한 후 이를 다양한 형태로 후가공하여 직물 센서를 개발하고 암 밴드에 부착하였다. 직물 센서는 코팅용 바탕 직물의 종류(2가지), 센서의 부착 방법(2가지), 센서의 layer 수(2가지), 센서의 길이(3가지), 센서의 너비(2가지)의 총 48개로 구성되었다. Con-Trex MJ에 48개의 암 밴드를 입힌 인체 모형 팔을 대상으로 직물 동작 센서의 성능을 평가하였다. 인체 모형 팔에 입혀진 총 48개의 암 밴드 각각에 대해서 frequency: 0.5Hz, ROM: $20^{\circ}{\sim}120^{\circ}$ 에서 굽힘과 폄 동작을 반복하도록 조정하였고, 48개 각 사례 당 세 세트(set)씩 반복 측정한 전압값을 기록하였다. 전압값을 peak-to-peak voltage(Vp-p)의 base line의 균일성, 동일 세트 내 Vp-p의 균일성, 세 세트 간의 Vp-p의 균일성을 기준으로 평가하고 분석한 결과, SWCNT 코팅된 'L' 직물을 두 겹으로 구성하여 열고정 방식으로 부착한 $50{\times}5mm$, $50{\times}10mm$, $100{\times}10mm$ 크기의 직물 센서와, SWCNT 코팅된 'W' 직물을 두 겹으로 구성하고 열고정 방식으로 부착한 $50{\times}10mm$ 크기의 직물 센서가 전체 변화율 5%이내의 가장 균일하고 안정적인 신호값을 나타내었다. 이상의 연구 결과를 통해 SWCNT 코팅 소재를 다양한 형태로 가공해 직물 센서로 구현했을 때 인체의 사지 동작을 측정할 수 있는 센서로서 적합함을 확인하였고, 최적의 센서 형태를 규명하였다.
1977년 11월 11일 부터 1978년 6월 12일까지 부산수산대학 연구실의 실험수조내에서 사육실험한 무지 개송어의 성장결과를 요약하면 다음과 같다. 1. 사육수조는 $1m\times1m\times0.67m(D)$ 스테인레스 수조에 수심 40m(수양 $400\iota$로 유지하고, 수조의 바닥가운데는 직경 20cm, 깊이 20cm의 역원추형의 침전배수부가 있어서, 연속주수되는 량만큼의 물이 수조내의 오물과 함께 수조밖의 스탠드파이프를 통하여 밖으로 배수되었다. 주수는 1분당 $3\iota$, 매일 약 16기간 계속하였다(24시간기준 1분당 $2\iota$). 수조내에 설치된 간역여과제치는는 크기 $23cm\times23cm\times40cm(D)$의 플라스틱통에 깊이 약 30cm 되도록 자갈을 넣었고, 여과순환수량은 1시간당 평균 $1,030\iota$였다. 따라서, 회전율은 1시간당 약 2.6회 된다. 2. 제1기인 처음 77 시간에 평균 88.3g부터 229g 으로 자랐고, 총 중량은 30.7g으로 되었다. 이 때의 사료계수는 1.249, 일간평균성장율은 $1.245\%$, 일간평균성장율은 243.4g였다. 그 동안의 폐사는 작은 것 2미, 53g였다. 제2기인 135 일간에는 평균229g으로부터 555g으로 자랐고, 생존한 것은 103미 57.2kg 였다. 그동안 사고, 병사, 기타 이유로 덜어낸 것이 31미, 11,255g 였다. 이 기간중의 사료계수는 1.447, 일간평균 성장률 $0.658\%$, 일간성장량은 평균 279.8g 였다. 전기간을 통한 212일간의 결과를 종합하면 성장률 6.28배, 일간평균 성장율 $0.871\%$, 일간평균성장량은 266.5g, 사료게수 1.381을 나타난다. 3. 먹이는 국내에서 자급할 수 있는 어체, 번데기를 주원료로하여 연구실에서 제조하여 사용하고 그 결과는 외국의 고단백질상품사료에 의한 사육결과에 못지 않는 성장률과 사료효율을 나타냈다. 4. 이번 결과를 그대로 적용하여 5,000kg의 생산시설을 만들면, 소요되는 지하수량은 1시간 약 $10.8m^3$, 212일간 사육한다고 보면 약 530만원의 경비로 970만원의 이익이 나오는 계산이 되므로, 어느 정도의 지하수가 확보된다면 기업적으로도 충분히 성립된다고 생각된다.
국립암센터에 설치된 양성자 치료기는 양성자 가속기의 운영을 통해 많은 양의 이차방사선을 방출하게 되는데, 이는 양성자 빔이 가속 중에 주위의 물질과 반응을 하여 이차 입자를 발생하고 방사성 동위원소도 생성하기 때문이다. 생성된 방사성 동위원소에 의한 방사선량은 시간에 따라 감쇠되지만 양성자 치료기의 운영 및 유지보수를 위해 수시로 가속기 작업종사자들이 시설내부로 접근해야 하며 이로 인해 이차방사선에 의한 피폭 문제가 발생될 수 있다. 본 논문에서는 양성자 가속기(Cyclotron)를 포함한 양성자 치료기의 운영을 위해 필요한 작업종사자들의 작업환경을 평가하고, 적절한 수준의 방사선 방호대책을 수립하기 위해 양성자 치료기 운영 중 가장 높은 수준의 방사선이 발생되는 양성자 가속기(Cyclotron) 및 주변 지역에서의 가속기 가동에 따른 방사선 발생 정도를 측정하였고 그 지속시간을 분석하였다. 이를 위해 양성자 빔의 손실이 가장 큰 가속기 주변과 에너지 선택 시스템(Energy Selection System, ESS)지역의 탄소(graphite, $^{12}C$) 재질로 구성된 에너지 감쇠장치(degrader)에서의 방사선 변화를 추적하고, 가속기에서 생산된 230 MeV의 고정된 에너지 빔이 에너지 감쇠장치(degrader)를 거쳐 ESS를 통해 전송된 빔의 효율을 산출하고 빔의 전송 구간에서의 상대적인 방사화 정도를 분석하였다. 이러한 분석 자료를 토대로 작업종사자들의 작업간 피폭 수준을 계산하고 연간 피폭 정도를 측정하였다. 작업 중 가속기 시설내의 선량은 수십 ${\mu}Sv/h$로 다른 방사선 치료기에 비해 상대적으로 높은 수준이지만 작업시간을 고려한 연간 총 피폭 선량은 작업자에 따라 1~3 mSv/year 정도로, 연간 피폭 한계 선량보다 충분히 낮은 수준으로 운영이 가능하였다.
The purposes of this study were : 1) to assess the level of pain and to identity the varieties and the degree of pain-related behavior, 2) to measure the level of correlation between the level of pain and the degree of pain- related behavior, 3) to test the correlation between the Korean Pain Rating Scale (KPRS) and Graphic Rating Scale(GRS), and 4) to gather data relevant to the Socio-demographic status of the subjects. The level of pain was measured by KPRS and GRS developed by the researchers. The KPRS consists of three dimensions ; the sensory, the affective and the miscellaneous and the GRS of two separate scales ; the intensity scale and the unpleasantness scale. Of the 2, 025 who had visited orthopedic and neurosurgical out-patients department of 11 university hospitals in various districts of Korea with the episode of Joint pain, 405 subjects were self-selected by responding to the data gathering tools and questionaires mailed. The results are summaried as follows : 1. Maale(217, 53.6%) exceeded female patients(188, 46.4%) in number and the onset of joint pain was more prevalent in the age groups of the 20s and the 30s. 160(39.5%) had been hospitalized for the treatment of, and 87(21.5%) had retired because of the joint pain. 2. Mean pain score measured by KPRS was 128.31 (range; 0-1.344.8) ; mean sensory score was 43.23(range ; 0-645.88%), mean affective score was 46.09(range ; 0- 356.72), and mean miscellaneous score was 39.99(range ; 0-341.68). Mean pain scores measured by GRS were ; sensory intensity score ; 109.1(range ; 0-200) and distress score ; 99.1 (range ; 0-200). 3. The prevalent sites of joint pain revealed to be the right knee joint(203; 50.1%), left knee joint(181(44.7%), left ilium(147, 36.3%), lumbar region (106; 26.2%), hip joint(92; 22.7%) and the ankle(84; 20.7%). 4. The average sleep hour was 6.8hours per day and the average rest hour during the day hours was 3.3hours (range 0-20). 5. The average duration of suffering from joint pain was 49.1 months. 6. Most of the subjects(298; 73.6%) used some sorts of pain relieving practices ; the most prevalent pain relieving practice was the compliance with the physician prescribed treatments(34.4%). 7. The level of discomfort in carrying out the ADL(activities of daily living was 101.16(38.83) and the level of needs for aid in carrying out the ADL was 76.62(31.79). 8. The interrelation between KPRS total score and GRS sensory intensity score(.4438), as well as that of GRS distress score(r=.4446) were not highly correlated, however, sensory and affective dimension within KPRS (.7547) and pain intensity and distress score of GRS(.6975) revealed moderate intercorrelation. 9. Pain-related behaviors such as discomfort in carrying out ADL, the need for aids in carrying out ADL, frequency of pain relieving practices, varieties of pain sites and length of rest hours during the day hours revealed to be highly correlated with the level of pain measured by KPRS, GRS sensory intensity scale and GRS distress scale. The following are recommended ; 1. Test for the correlation of KPRS total score and the summated score of GRS ; sensory intensity and distress scores. 2. Possibilities of utilization of the pain-related behaviors which revealed high correlation as indirect assessment tool for measuring the level of pain.
연구배경: COPD에서 보이는 호흡곤란의 주된 원인이 폐의 과팽창이고 이 과팽창을 치료하는 것이 호흡곤란의 향상에 중요한 것으로 밝혀지고 있다. 그러나 $FEV_1$, FVC만으로는 호흡곤란의 정도와 과팽창을 정확히 측정할 수 없다. 따라서 단순 흉부 방사선에서 관찰되는 폐의 과팽창의 정도와 고해상도흉부 단층촬영에서 폐기종의 정도가 호흡곤란을 객관적으로 알 수 있는 지표가 되는 지를 알아보고자 하였다. 방 법: COPD로 진단 받은 50명(평균 연령 69세, 남자 47명, 여자 3명)을 대상으로 하였다. 폐의 종축, 흉골 뒤공간, 횡격막의 높이를 각각 측정하여 총 0에서부터 3까지로 폐의 과팽창 정도(chest score)를 측정하였고, 고해상도 흉부단층 촬영에서 폐기종의 정도(HRCT score)를 구하여 이를 환자의 호흡곤란의 정도 및 폐용적 검사를 비롯한 폐기능 검사와의 상관관계를 구하였다. 결 과: 호흡곤란의 지수(Borg scale)는 폐기능 검사의 지표인 FVC, $FEV_1$, $FEV_1$/FVC, RV, RV/TLC, DLCO와 유의한 상관관계가 관찰되었다. Borg scale은 HRCT score와 상관관계가 있었으나, chest score와는 상관관계가 없었다. 그리고 Borg scale은 체질량 지수와 역 상관관계가 있었다. 결 론: 고해상도 흉부 단층촬영의 폐기종의 정도는 COPD 환자에서 호흡곤란의 정도를 알 수 있는 객관적 지표가 될 수 있다.
담수산 징거미새우 Macrobrachium nipponense (De Hann)는 우리나라 남부의 하구 기수 구역에 서식하는 흔한 종으로 체장 약 7 cm 정도이며 우리나라 Macrobrachium 속의 새우 중에서는 가장 큰 종이다. 최근 자연 수역의 오염으로 자연에서의 이 종의 수가 급격히 감소되고 있어서 이에 대한 대책이 시급한 실정이다. 따라서 본 실험에서는 이 종의 인공종묘생산을 위한 기초로서의 생식생태 즉 교미전탈피 횟수, 교미전탈피의 형태학적 특징, 탈피기간중의 일일 먹이량, 교미 행동, 정자와 정포의 구조, 정소내의 수정관의 형태, 산란 기작, 적정인공수정 시간, 교미로 부터 산란에 소요되는 시간 및 과정, 수온과 염분농도에 따른 난발생 및 부화에 미치는 영향, 난부화과정을 조사하였고 그 결과는 다음과 같다. 1. 수온 $28^{\circ}C$ 감소량 $3.26{\~}4.35\%_{\circ}$ 에서 암컷은 $17{\~}18$일 주기로 성장 탈피를 하였고, $13{\~}14$일 간격으로 $4{\~}5$회의 교미전탈피를 하였다. 인공수정에 적절한 시간은 교미전탈피 후 14시간 이내였고 최적시간은 탈피후 8시간 이내였다. 교미시에 수컷은 한천질의 정포를 암컷의 복구에 넣었고 산란은 교미후 $6{\~}17$시간 후에 관찰되었으며 산란시에 체외수정이 된다고 사료된다. 수정난은 암컷의 유영지 사이에 안들어 진 포난실에 부착되며 그 수는 암컷 체장이 6.5 cm인 경우 약 $5000{\~}6000$입 정도이다. 2. 산란 직후의 알은 타원형이며 평균 크기는 $0.58{\times}0.48$ mm였고 난발생이 진행되면서 크기가 증가되어 마지막에는 $0.85{\times}0.48$ mm로 되었다 알의 장축(Y)와 소요일수(X)와의 상관관계는 Y=5.60194+0.007358X로 나타낼 수 있었다. 난의 발생은 표할이었으며 분할구는 4 세포기에 나타났다. 난발생은 수온 $22{\~}30^{\circ}C$에서 정상적이며 최적수온은 $26{\~}28^{\circ}C$로 나타났고, 염분도는 염소양 $0{\~}6.64\%_{\circ}$ 에서 정상적으로 발생하였으며 최적염분 농도는 $2.21{\%_{\circ}}$이었다. 난부화일수(Y)와 수온(X)와의 상관관계는 Y=50.803-1.355X로 나타났고 수온 $28{\~}28.6^{\circ}C$에서 산란에서 부화까지는 $12{\~}13$일이 소요되었다. 3. 교미전탈피는 성장 탈피와 형태적으로 큰 차이가 났으며 교미전탈피에서만 번식강모와 번식 섬모가 흉복갑부, 복부측판 및 $1{\~}4$번 유영지 기부에 나타났다.
The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.
목적: 자궁경부암으로 진단 받고 근치적 방사선치료를 받은 환자에서 방사선 치료 전과 치료 중 자기공명영상을 비교함으로써 삼차원입체조형치료나 강도변조방사선치료의 효과에 영향을 미칠 수 있는 자궁의 크기 및 위치 변화를 알아보았다. 대상 및 방법: 1997부터 2000년까지 삼성서울병원에서 자궁경부암으로 근치적 방사선치료를 시행 받은 환자 중 방사선치료 전과 치료 중간에 자기공명영상 촬영을 시행한 47명의 환자를 대상하였다. 방사선치료는 전골반조사와 강내조사가 시행되었는데 전골반조사는 골반 전체에 통상적 4문 조사법으로 매일 1.8 Gy씩, 주 5회 실시하며 총선량 50.4$\~$55.8 Gy (30.6$\~$45 Gy 이후에 골반중심부차폐) 조사하였고, 강내조사는 A점에 4 Gy씩, 매주 2회 시행하여 총선량 24 Gy까지 시행하였다. 자기공명영상 촬영은 방사선치료 시작 전과 치료 시작 후 3$\~$4주경 강내조사와 골반중심차폐를 하기 전에 실시되었다. 방사선치료 전과 치료 중 촬영된 자기공명영상의 T2 강조 시상면 영상과 축면 영상에서 자궁의 변화를 알기 위하여 자궁경관 크기, 자궁 크기, 자궁체부 크기, 자궁경관 굴곡각, 자궁체부 굴곡각, 과 자궁체부 회전각을 측정하였다. 결과: 자궁경관 크기는 치료 전에 평균 36.7 mm에서 치료 후 27.8 mm로 감소하였고, 자궁체부 크기는 평균 2.5 mm 감소하였으며, 자궁크기 차이는 평균 6.4 mm였다. 자궁경부에서 자궁저부까지의 거리 차이는 평균 15.2 mm였으며, 이 중 6예에선 30 mm 이상 크기가 줄었는데 이 경우에 종양의 크기가 모두 4 cm 이상이었다. 자궁경관 굴곡각은 평균 13.2$^{\circ}$, 자궁체부 굴곡각은 평균 16.9$^{\circ}$ 자궁체부 회전각은 평균 13.1$^{\circ}$ 차이가 있었다. 회전이나 굴곡 중 어느 하나라도 30$^{\circ}$이상 변화된 경우가 전체 환자 중 9예(19.1$\%$)가 있었다. 연령과 자궁경관 굴곡각의 차이는 통계적으로 유구한 연관이 있었고, 종양 크기에 따라 자궁경관 크기, 자궁 크기, 자궁체부 크기와 자궁경관 굴곡각은 모두 유의한 변화가 있었다. 그리고, 종양 크기가 4 cm 이상인 경우에 자궁경관의 크기, 자궁 크기와 자궁체부의 크기 변화가 모두 통계적으로 의미있는 차이를 보였다. 또한, 자궁경부로부터 자궁저부까지 거리 차이는 종양 크기가 4 cm 미만인 경우는 5.3 mm였으나 4 cm 이상일 때는 19.4 mm로 현저한 변화를 보였다. 자궁경관 굴곡각은 60세 미만인 경우 60세 이상보다 8$^{\circ}$ 정도 더 변화가 있었고, 종양 크기가 4 cm 이상일 때 미만일 때보다 2배 이상 굴곡 변화가 있었다. 결론: 자궁경부암 환자에서 근치적 방사선치료 시 치료에 따른 자궁 크기 및 위치 변화가 다양하고 개별적으로 예측하기 쉽지 않으므로, 특히, 60세 미만이거나 종양 크기가 4 cm 이상인 경우, 삼차원입체조형치료나 강도변조 방사선치료를 이용한 근치적 방사선치료 시 치료 중 개별환자의 계획용표적체적의 변화를 반드시 고려해야 한다고 생각한다.
본 연구는 신체재활을 위해 다양한 꽃꽂이 작업들을 이용하기 위해서 꽃꽂이 작업 시 주로 사용되는 작업들을 분류하고, 각 작업 수행 시 사용되는 상지의 관절가동범위와 근육 활성도를 측정하였다. 또한 꽃꽂이 작업 시 상지의 관절 가동범위와 근육활성도 측정결과를 근거로 뇌졸중 환자의 상지기능 향상을 위한 꽃꽂이 프로그램을 개발하여, 실제 임상현장에서 적용하여 그 효과를 조사하였다. 상지 움직임을 정량적으로 분석하기 위해 주요한 꽃꽂이 작업을 분류한 다음, 작업 분석을 토대로 8가지 꽃꽂이 기본 작업(자르기 1, 굵은 줄기; 자르기 2, 가는 줄기; 꽂기 1, 긴 줄기; 꽂기 2, 짧은 줄기; 말기; 관엽 이용; 휘기 1, 굵은 줄기; 휘기 2, 가는 줄기; 감기, 절화용 와이어 이용)을 재분류하였다. 강원도 소재 대학의 8명의 남학생(평균 연령 $24.1{\pm}2.5$세)들이 8가지 꽃꽂이 작업을 수행하는 동안 삼차원 실시간 동작 분석 시스템과 근 전도 측정기를 이용하여 상지의 관절가동범위와 각 근육부위별 활성도를 각각 측정하였다. 이 측정결과를 토대로 상지기능 향상을 위한 꽃꽃이 프로그램을 개발하여, 서울시 소재 재활병원에 입원한 뇌졸중 환자들을 대상으로 실시하였다. 참여대상자들의 의사에 따라 4명은 원예치료군에 나머지 4명은 작업치료군에 배정되었다. 원예치료는 1일 2회(총 33회기)로 실시되었으며, 프로그램 전과 후에 뇌졸중 환자들의 상지기능 평가를 위해서 관절가동범위와 장악력 및 전반적인 상지기능평가가 수행되었다. 꽃꽂이 작업 수행 시 어깨관절은 자르기 1 작업에서 관절가동범위의 변화가 가장 큰 것으로 나타났고, 팔꿈치 관절은 감기 작업에서, 손목부위 관절은 휘기 1 작업에서 가장 큰 관절가동 범위를 나타냈다(P < 0.001). 수행된 꽃꽂이 작업에 따라 상지 근육의 부위별 근육 활성도는 다양한 변화를 보였으며, 한 가지 작업에 대해 여러 부위의 근육들이 동시에 사용되었다(P < 0.001). 또한 같은 방법으로 수행하는 작업일지라도 재료의 굵기나 길이에 따라 관절가동범위와 근수축의 차이가 나타났다(P < 0.001). 뇌졸중 환자의 상지기능 향상을 위해 실시된 꽃꽂이 작업을 이용한 원예치료 프로그램은 뇌졸중 환자들의 상지(어깨, 팔꿈치, 손목관절)의 가동범위와 장악력 및 전반적인 상지 기능에 긍정적인 영향을 미치는 것으로 나타났다. 따라서 본 연구는 꽃꽂이의 주요 작업을 이용하여 특정 신체부위의 기능향상이 필요한 대상자의 재활치료를 위한 프로그램 개발에 유용한 기초자료를 제시하였다. 추가적으로 실제 재활환자의 상태에 따라 효율적인 맞춤형 원예치료 프로그램을 개발하여 그 효과를 규명하는 연구가 필요할 것이다.
The purpose of this study was to observe the responses of the remaining pulp tissue after pulpotomy upon the several kinds of $Ca(OH)_2$ products and the responses of periapical tissue upon some root canal filling materials after extirpation. For pulpotomy, the class V cavities were prepared on the premolars, molars and upper canines, and the pulp was amputated. Each drug was placed over the amputated tissue and cavity was sealed with zinc oxide eugenol cement. The drugs which were used for the study were Dycal (Caulk Co. U.S.A.), Cavitec (Kerr Co. U.S.A.), Calvital, Nobudyne and Neodyne (Neo Dental Chemical Products). For extirpation, the endodontic cavities were prepared on the lingual surfaces of anterior teeth, and the pulp tissues were extirpated as routine method. After enlarging, irrigation, and measuring of root length by taking X-ray, each root canal filling material was filled in the canal with gutta percha cone, and endodontic cavity was sealed with zinc oxide eugenol cement. Zinc oxide eugenol, $Ca(OH)_2$ (Eli Lilly Co. U.S.A.) and Vitapex (Neo Dental Chemical Products) were used as root canal filling materials. Animals were sacrificed after 1, 3 and 6 weeks following the operation. The teeth were decalcified in formic acid, sectioned and stained with hematoxylin eosin. Microscopic examination revealed as follows. 1. Dycal: The dentin bridge formation was observed at the 3rd week after pulpotomy. Inflammatory conditions which were infiltration of inflammatory cells and dilatation of blood vessels were kept in remaining pulp tissue at the 6th week. 2. Calvital: The dentin bridge was observed at the 1st week after pulpotomy. As the time clasped, the pulp tended to be the fibrous degeneration. 3. Cavitec, Nobudyne and Neodyne: In the case of Cavitec and Nobudyne, the incompleted and irregular dentin bridge was observed at the 6th week, and in Neodyne, was observed at the 3rd week. The severe inflammatory changes were seen in the remaining pulp tissue. As the time clasped, the fibrous degeneration tended to spread in the remaining pulp tissue. 4. $Ca(OH)_2$: Osteocementum was formed at the 3rd week, the matrix of cementum and dentin were resorted, and infiltration of lymphocytes was seen in periapical tissue when $Ca(OH)_2$ was used as canal-filling materials. S. ZOE and Vitapex The cementum like substance was seen in periapical portion at the 1st week, when ZOE and Vitapex were used as root canal filling materials. As the time elapsed, the matrix of cementum and dentin tended to be resorted. At the 6th week, the inflammatory condition of periapical tissue was continued in the case of ZOE, but was reduced in the case of Vitapex.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.