담수산 징거미새우, Macrobrachium nipponense (De Haan)의 증${\cdot}$양식에 관한 생물학적 기초연구 1. 생식생태에 관한 연구

Studies on the Propagation of the Freshwater Prawn, Macrobrachium nipponense (De Haan) Reared in the Laboratory

  • 권진수 (동의대학교 생물생생산연구소) ;
  • 이복규 (동의대학교 생물생생산연구소)
  • Kwon Chin-Soo (The Institute for Biological Production Research Dong Eui University) ;
  • Lee Bok-Kyu (The Institute for Biological Production Research Dong Eui University)
  • 발행 : 1991.05.01

초록

담수산 징거미새우 Macrobrachium nipponense (De Hann)는 우리나라 남부의 하구 기수 구역에 서식하는 흔한 종으로 체장 약 7 cm 정도이며 우리나라 Macrobrachium 속의 새우 중에서는 가장 큰 종이다. 최근 자연 수역의 오염으로 자연에서의 이 종의 수가 급격히 감소되고 있어서 이에 대한 대책이 시급한 실정이다. 따라서 본 실험에서는 이 종의 인공종묘생산을 위한 기초로서의 생식생태 즉 교미전탈피 횟수, 교미전탈피의 형태학적 특징, 탈피기간중의 일일 먹이량, 교미 행동, 정자와 정포의 구조, 정소내의 수정관의 형태, 산란 기작, 적정인공수정 시간, 교미로 부터 산란에 소요되는 시간 및 과정, 수온과 염분농도에 따른 난발생 및 부화에 미치는 영향, 난부화과정을 조사하였고 그 결과는 다음과 같다. 1. 수온 $28^{\circ}C$ 감소량 $3.26{\~}4.35\%_{\circ}$ 에서 암컷은 $17{\~}18$일 주기로 성장 탈피를 하였고, $13{\~}14$일 간격으로 $4{\~}5$회의 교미전탈피를 하였다. 인공수정에 적절한 시간은 교미전탈피 후 14시간 이내였고 최적시간은 탈피후 8시간 이내였다. 교미시에 수컷은 한천질의 정포를 암컷의 복구에 넣었고 산란은 교미후 $6{\~}17$시간 후에 관찰되었으며 산란시에 체외수정이 된다고 사료된다. 수정난은 암컷의 유영지 사이에 안들어 진 포난실에 부착되며 그 수는 암컷 체장이 6.5 cm인 경우 약 $5000{\~}6000$입 정도이다. 2. 산란 직후의 알은 타원형이며 평균 크기는 $0.58{\times}0.48$ mm였고 난발생이 진행되면서 크기가 증가되어 마지막에는 $0.85{\times}0.48$ mm로 되었다 알의 장축(Y)와 소요일수(X)와의 상관관계는 Y=5.60194+0.007358X로 나타낼 수 있었다. 난의 발생은 표할이었으며 분할구는 4 세포기에 나타났다. 난발생은 수온 $22{\~}30^{\circ}C$에서 정상적이며 최적수온은 $26{\~}28^{\circ}C$로 나타났고, 염분도는 염소양 $0{\~}6.64\%_{\circ}$ 에서 정상적으로 발생하였으며 최적염분 농도는 $2.21{\%_{\circ}}$이었다. 난부화일수(Y)와 수온(X)와의 상관관계는 Y=50.803-1.355X로 나타났고 수온 $28{\~}28.6^{\circ}C$에서 산란에서 부화까지는 $12{\~}13$일이 소요되었다. 3. 교미전탈피는 성장 탈피와 형태적으로 큰 차이가 났으며 교미전탈피에서만 번식강모와 번식 섬모가 흉복갑부, 복부측판 및 $1{\~}4$번 유영지 기부에 나타났다.

This paper deals with the reproductive ecology e.g., number of the pre-spawning moults, morphological characteristics of the pre-spawning moult the common moult, daily ration druing a molting cycle mating behavior, structures of spermatozoa and spermatophore, structure of vas deferens, mechanisms of the oviposition and brooding into the egg-chambers, a suitable time for the artificial mating and fertilization, time sequence of the oviposition and brooding into egg-chambers from the copulation, responses to temperature and chlorinity on the egg development and hatching, effect of temperatures on duration of egg development, physical mechanism of the egg hatching, to make an attempt for the artificial spawning and brooding to establish a suitable system of the artificial seedling-production for the aquaculture. 1. Females molted commonly $8{\~}10$ times at an interval of $17{\~}18$ days at $28^{\circ}C,\;3.26\~4.35\%_{\circ}$ while the prespawning moltings were $4{\~}5$ times at an interval of $13{\~}14$ days. The suitable state for artificial copulation was within 14 hours elapsed from the prespawning moltings (most suitable state was within 8 hours). Males discharged a gelatinous spermatophore and placed it on the females sternum during copulation. Oviposition was seen $6{\~}17$ hours after copulation. External fertilization was considered to take place at oviposition. Fertilized eggs held in egg-chambers forming between pleopods were about $5000{\~}6000$ in females those sizes about 6.5 cm in body length. 2. Eggs immediately after oviposition were elliptic shape, measuring $0.58{\times}0.48$ mm up to hatching. Their sizes increased with egg development and finally reached $0.85{\times}0.54$ mm up to hatching. The relationship between the long axis of the egg(Y in U) and days elapsed(X) was expressed as Y= 5.60194 + 0.007358X. The eggs performed superficial cleavage and their cleavage furrows became visible at the 4-daughter-nucleus stage. The eggs showed normal development up to hatching at water temperature range of $22{\~}30^{\circ}C$ (optimum temperature : $26{\~}28^{\circ}C$) and at chlorinity range of $0.00\~6.64\%_{\circ}$ (optimun chlorinity : $2.21{\%}_{\circ}$). The relationship between incubation period (Y in days) and water temperature(X in $^{\circ}C$) could be expressed as Y= 50.803-1.3555X. The eggs hatched $12{\~}13$ days after oviposition at $28.0{\~}28.6^{\circ}C$ 3. The pre-spawning moltings were appreciably different in the morphologic structure from those of common moltings. Breeding setae and dresses were formed on the thoracic regions, abdominal epimerae and the bases of the first to fourth pleopods in order to prepare and support oviposition, transfering and supporting eggs in egg-chambers up to hatching. These supplementary breeding organs were observed only at reproductive seasons.

키워드