• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.525-528
• /
• 2004

Manchester encoder of FSM method is a suitable signal coding for an RFID system. However, Manchester encoder of FSM method has usually more gate count and lower maximum frequency than encoder of exclusive-OR gate method. In this paper. it is proposed encoder of FSM method to improve gate count and maximum frequency.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.789-797
• /
• 2003

In this paper, we consider two components system which have bivariate weibull model with bivariate random censored data. We proposed large sample test for independence based on maximum likelihood estimator and relative frequency estimator, respectively. Also we derive asymptotic properties for the large sample tests and present a numerical study.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.571-578
• /
• 2003

In this paper, we consider two components system which have bivariate weibull model with bivariate type I censored data. We proposed maximum likelihood estimator and relative frequency estimator for the reliability of series system. Also, we construct approximate confidence intervals for the reliability based on the two proposed estimators. And we present a numerical study.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.583-584
• /
• 2015

Energy Storage System(ESS) can be used as several purposes such as uninterruptible power supply (UPS), frequency regulation, maximum load cut, and etc. This paper analyzes and simulates the reclosing operation in distribution system with ESS for frequency regulation and maximum load cut. To solve the effect from ESS, two sequences in reclosing process are added to conventional reclosing. The modelings and simulations of reclosing operation using EMTP/ATPDraw are performed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.1-11
• /
• 1995

Manual lifting, as a part of manual materials handling activities, is recognized by authorities in the fields of occupational health and safety as a major hazards to industrial workers. In order to minimize the injuries caused by manual material handling activities as well as maximize job productivity, it is important to determine the maximum weights. This paper presents the optimal combination of membership functions according to the high lifting frequency and determines the safe maximum acceptable weights in manual lifting activities through the actual experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.16-16
• /
• 2011

Statistics of extreme rainfall play a vital role in engineering practice from the perspective of mitigation and protection of infrastructure and human life from flooding. While flood frequency assessments, based on river flood flow data are preferred, the analysis of rainfall data is often more convenient due to the finer spatial nature of rainfall recording networks, often with longer records, and potentially more easily transferable from site to site. The rainfall frequency analysis as a design tool has developed over the years in New Zealand from Seelye's daily rainfall frequency maps in 1947 to Thompson's web based tool in 2010. This paper will present a history of the development of New Zealand rainfall frequency analysis methods, and the details of the latest method, so that comparisons may in future be made with the development of Korean methods. One of the main findings in the development of methods was new knowledge on the distribution of New Zealand rainfall extremes. The High Intensity Rainfall Design System (HIRDS.V3) method (Thompson, 2011) is based upon a regional rainfall frequency analysis with the following assumptions: $\bullet$ An "index flood" rainfall regional frequency method, using the median annual maximum rainfall as the indexing variable. $\bullet$ A regional dimensionless growth curve based on the Generalised Extreme Value (GEV), and using goodness of fit test for the GEV, Gumbel (EV1), and Generalised Logistic (GLO) distributions. $\bullet$ Mapping of median annual maximum rainfall and parameters of the regional growth curves, using thin-plate smoothing splines, a $2km\times2km$ grid, L moments statistics, 10 durations from 10 minutes to 72 hours, and a maximum Average Recurrence Interval of 100 years.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.436-440
• /
• 2021

The impact of the gate length (L_g) on the DC and high-frequency characteristics of indium-rich In_0.8Ga_0.2As channel high-electron mobility transistors (HEMTs) on a 3-inch InP substrate was inverstigated. HEMTs with a source-to-drain spacing (L_SD) of 0.8 ㎛ with different values of L_g ranging from 1 ㎛ to 19 nm were fabricated, and their DC and RF responses were measured and analyzed in detail. In addition, a T-shaped gate with a gate stem height as high as 200 nm was utilized to minimize the parasitic gate capacitance during device fabrication. The threshold voltage (V_T) roll-off behavior against L_g was observed clearly, and the maximum transconductance (g_{m_max}) improved as L_g scaled down to 19 nm. In particular, the device with an L_g of 19 nm with an L_SD of 0.8 mm exhibited an excellent combination of DC and RF characteristics, such as a g_{m_max} of 2.5 mS/㎛, On resistance (R_ON) of 261 Ω·㎛, current-gain cutoff frequency (f_T) of 738 GHz, and maximum oscillation frequency (f_max) of 492 GHz. The results indicate that the reduction of L_g to 19 nm improves the DC and RF characteristics of InGaAs HEMTs, and a possible increase in the parasitic capacitance component, associated with T-shap, remains negligible in the device architecture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.125-132
• /
• 2023

To NP-complete 3-SAT problem, this paper proposes a O(nm) polynomial time algorithm, where n is the number of literals and m is the total frequency of all literals in equation f. Conventionally well-known DPLLs should perform O(2^𝑙) in the worst case by performing backtracking if they fail to find a solution in a brute-force search of a branch-and-bound for the number of literals 𝑙. DPLL forms the core of the SAT Solver by substituting true(T) or false(F) for a literal so that a clause containing the least frequency literal is true(T) and removing a clause containing that literal. Contrary to DPLL, the proposed algorithm selects a literal _max𝑙 with the maximum frequency and sets $_{\max}({\mid}l{\mid},{\mid}{\bar{l}}{\mid})=1$. It then deletes 𝑙∈c_i clause in addition to ${\bar{l}}$ from ${\bar{l}}{\in}c_i$ clause. Its test results on various k-SAT problems not only show that it performs less than existing DPLL algorithm, but prove its simplicity in satisfiability verification.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.212-216
• /
• 2005

In an ultrasonic glass scriber, the effect of ultrasonic vibration and its optimum driving frequency were investigated experimentally. To investigate the optimum ultrasonic frequency theoretically, the vibration model of the ultrasonic scriber is assumed. The frequency for maximum amplitude of acceleration is obtained theoretically. To investigate the depth of cutting edge corresponding the each frequency. The quartz glass plate specimen with a dimension of $200mm(L){\times}30mm(W){\times}3mm(T)$ is selected. The ultrasonic transducer is operated by the constant acceleration amplitude for the every frequency. The maximum crack depth was generated when the driving frequency was 18.35kHz. These results were in good agreement with those of the calculated model theoretically.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.141-153
• /
• 2012

In this study, we estimated probable precipitation amounts at the target year (2020, 2030, 2040) of 55 weather stations in Korea using the 24 hour annual maximum precipitation data from 1973 through 2009 which should be useful for management of agricultural reservoirs. Not only trend tests but also non-stationary tests were performed and non-stationary frequency analysis were conducted to all of 55 sites. Gumbel distribution was chosen and probability weighted moment method was used to estimate model parameters. The behavior of the mean of extreme precipitation data, scale parameter, and location parameter were analyzed. The probable precipitation amount at the target year was estimated by a non-stationary frequency analysis using the linear regression analysis for the mean of extreme precipitation data, scale parameter, and location parameter. Overall results demonstrated that the probable precipitation amounts using the non-stationary frequency analysis were overestimated. There were large increase of the probable precipitation amounts of middle part of Korea and decrease at several sites in Southern part. The non-stationary frequency analysis using a linear model should be applicable to relatively short projection periods.