• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.119-135
• /
• 2022

This paper used dynamic centrifuge tests to examine the seismic response for a deep temporary retaining wall with four input motions of 100, 1,000, and 2,400 years of return periods. The centrifuge model was designed based on an actual deep excavation design with a 50 m maximum excavation depth. The model backfill was prepared with dry silica sand at a relative density of 55%, and the retaining wall was modeled as a 24.8 m height diaphragm wall supported by struts. Acceleration response was amplified at the backfill surface, top of the wall, and near bedrock. However, in the middle of the model, input motion was de-amplified. The member forces of the wall and strut induced by the seismic load, which excited, were compared with the member force at rest condition. The wall's maximum negative and positive moments were increased to 36% and 10% compared to the maximum moment at rest. The maximum axial force increases to 70% of the at rest axial force on the bottom strut. The equivalent static analysis using Mononobe-Okabe (M-O) and Seed-Whitman (S-W) seismic earth pressures were compared to the centrifuge results. Considering the bending moment, the analysis results with the M-O theory underestimates but that with the S-W theory overestimates.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.7-12
• /
• 1977

This experiment was conducted in the laboratory in order to find out the relationships between the root growth and soil physical properties. The soils selected for this study were Sangju sandy loam, Yeongog loam, Hwadong silty clay loam, which have been considered to be a typical upland soils of Korea. Artificial core samples were made with various moisture contents and bulk densities. Elongation rate of pea seedling taproot and soil strength were measured respectively in these core samples. The results obtained are summarized as follows: 1. The soil strength increased with the bulk density and deceased with moisture content. 2. The correlation between root elongation and soil bulk density was significantly recognized at the same moisture content and the root elongation was influenced by the bulk density more significantly at dry condition. 3. The elongation rate of pea seedling taproot was significantly decreased by increasing the strength (Yamanaka tester and Fine probe) of the soils. 4. The soil strength of $21kg/cm^2$ in fine metal probe or 24mm in Yamanaka tester was considered to be the critical point for plant growth, which was restricting root elongation smaller than 1/4 of the maximum growth rate.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.81-91
• /
• 2005

'Coarse grained material' refers to crushed stones or gravels, and the behaviour of soil containing coarse grained material is not easily defined using the conventional soil mechanics theory due to the influences of large particles, therefore large scale test is essential to investigate their effects. Previous studies have identified the major factors affecting the properties of coarse grained materials by using large scale shear testing apparatus, such as maximum particle size, water content, density and uniformity coefficients. In this paper, the effect of variation of maximum particle size and water content on shear strength was analyzed from the results of large scale shear test. In addition, the fiction coefficient at critical state per vertical load was estimated using the equation proposed by Wood (1998). The sample for the test was obtained from the local quarry sites. Tests results show that the shear strength for 50.8 m maximum particle size is relatively larger than that of 76.3 m and air-dry sample has larger shear strength than saturated sample. In the meantime, the friction coefficient at critical state shows $1.0\sim1.6$ according to the test conditions.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.156-165
• /
• 1983

This experiment was conducted to find out the effect of competitive duration and density of Cyperus serotinus Rottb. on rice growth and yield. In plant height of both rice and flatsedge, the compacter density of flatsedge, the higher was plant height. Rice in the 50 days competition with flatsedge had shorter culm than in other competition plots at all density. The panicle number was affected during the tillering stage. The spikelet number per panicle was influenced from 25 days to 50 days after transplanting. Grain maturity ratio and 1,000 grain-weight didn't decrease under competition before 50 days after transplanting. The competition during the tillering stage to the young panicle initiation stage decreased significantly rice yield. The rice competed with low density of flat sedge showed small decrement of yield and its components. The period reaching to maximum stem number of flatsedge become shorter as flatsedge density increased. Number of flatsedge tubers competed with rice produced was 40.1, 16.8 and 11.4 times as much in 1: 1, 1:3 and 1:5 density ratio of rice to flatsedge, respectively. Flatsedge dry matter weight and rough rice yield had the relationship of Y = 601. 95-$0.67x^{**}$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.367-378
• /
• 1994

The wastewater treatment characteristics of the fluidized bed filled with sand media and intermediately aerated were studied experimentally, and the obtained results were as follows; 1. The formations of biofilm on the media were greatly affected by the recirculation velocities. 2. Under the experimental condition that BOD loading rate was $4.2kg-BOD_5/m^3{\cdot}d$, the optimum media concentration was $261kg/m^3$ and the optimum recirculation velocity 1.35 cm/sec. 3. For the effluent quality of 20 mg-BOD/l and 20 mg-SS/l, the maximum allowable loading rate was about $8kg-BOD_5/m^3{\cdot}d$. 4. The dry density of biofilm was about 5.6% regardless of the filled media quantities and recirculation velocities. 5. Under the experimental conditions, the effluent solids concentration was below 20 mg/l, and the elimination of final clarifier can be expected.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.25-34
• /
• 1991

In this study, relationships between CBR values tested by Korean Standards (KS CBR) and the elastic moduli from CU compression tests are developed for the subgrade soils. Triaxial compression and KS CBR tests are carried out on five types of samples from 15 points in Korean ezpressways. Triaxial compression tests are performed under 3 types of coifining pressures to generalize the CBR -elastic modulus relationship as functions of confining pressured and mean principal stresses. From the regression analyses of experimental results, equations for relationships between the KS CBR and elastic moduli of roadbed Boils are proposed. An equation for the relation- ship between the KS CBR and the maximum dry density of roadbed soil is also proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.759-764
• /
• 2012

Copper Pillar Tin Bump (CPTB) was investigated for high density chip interconnect technology development, which was prepared by electroplating and electro-less plating methods. Copper pillar tin bumps that have $100{\mu}m$ pitch were introduced with fabrication process using a KM-1250 dry film photoresist (DFR), with copper electroplating for Copper Pillar Bump (CPB) formation firstly, and then tin electro-less plating on it for control oxidation. Electric resistivity and mechanical shear strength measurements were introduced to characterize the oxidation effects and bonding process as a function of thermo-compression. Electrical resistivity increased with increasing oxidation thickness, and shear strength had maximum value with $330^{\circ}C$ and 500 N at thermo-compression process. Through the simulation work, it was proved that the CPTB decreased in its size of conduction area as time passes, however it was largely affected by the copper oxidation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.177-186
• /
• 1992

In this study, the proper mixing ratio of fly ash to bottom ash is evaluated and bearing capacity of this mixed ash is examined for use of highway embankment and subgrade materials in large quantities. Independently of the mixing ratio of fly ash to bottom ash or the method of compaction test, maximum dry density ${\gamma}_{dmax}$ and CBR value of anthracite mixed coal ash is greater than that of bituminous mixed coal ash. The mixed ashes to contain more fly ash than that of which the ratio of fly ash to bottom ash is 8 : 2, are slaked readily when the water contents of compaction are greater than optimum moisture content O.M.C. The proper mixing ratios of fly ash to bottom ash are about 5 : 5 to 6 : 4. Coal ashes mixed with these ratios exhibit proper physical and geotechnical properties for use of highway embankment and subgrade materials, and enable coal ashes to be used in large quantities.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.455-461
• /
• 2000

Abstract Spirulina platensis was grown in SWlUe waste to reduce inorganic compowlds and simultaneously produce feed resources. Spirulina platensis prefers nitrogenous compounds in Ibe order: $NH_4^{+}-N>NO_3^{-}-N>simple-N$ such as urea and simple amino acids. It even consumes $NH_4^{+}-N$ first when urea or nitrate are present. Therefore, the content of residual $NH_4^{+}-N$ in Spimlina platensis cultures can be determined by the relative extent of the following processes: (i) algal uptake and assimilation; (ii) ammonia stripping; and (iii) decomposition of urea to NH;-N by urease-positive bacteria. The removal rates of total nitrogen ffild total phosphorus were estimated as an indicator of the treatment effIciency. It was found that Spirulina platensis was able to reduce 70-93% of $P_4^{3-}-P$, 67-93% of inorganic nitrogen, 80-90% of COD, and 37-56% of organic nitrogen in various concentrations of swine waste over 12 days of batch cultivation. The removal of inorganic compounds from swine waste was mainly used for cell growth, however, the organic nitrogen removal was not related to cell growlb. A maximum cell density of 1.52 dry-g/l was maintained with a dilution rate of 0.2l/day in continuous cultivation by adding 30% swine waste. The nitrogen and phosphorus removal rates were correlated to the dilution rates. Based on the amino acid profile, the quality of the proteins in the Spirulina platensis grown in the waste was the same as that in a clean culture.ulture.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.176-183
• /
• 2010

Endosulfan degrading ability of Klebsiella oxytoca KE-8 immobilized by entrapment with activated carbon was examined. Endosulfan degradation by the immobilized bacterial strains on several different activated carbon based support materials was investigated. Based on results, activated carbon ($8\times30$ mesh) was chosen as a support material. The immobilized Klebsiella oxytoca KE-8 with the cell density of 4 mg $g^{-1}$ (dry weight) degraded 22.18 ug $ml^{-1}$ endosulfan within 5 days at pH 7.0, $30^{\circ}C$ in batch shake flask cultures. Also, we an experimented recycle packed bed column mode and continuous packed bed column mode for endosulfan degradation. Under optimum operation condition, the immobilized cells in a laboratory scale pack bed column with support beads were able to degrade endosulfan completely in defined minimal salt medium at a maximum rate of 129.6 ug $ml^{-1}$ per day. Moreover, the endosulfan degradation activity could be demonstrated at $4^{\circ}C$ for one month without significant decrease in activity. Results of this study suggest that immobilized cells of Klebsiella oxytoca KE-8 might be applicable to endosulfan contaminated site.