• 제목/요약/키워드: Maxillary molar

검색결과 660건 처리시간 0.031초

Maxillary Sinusitis Resembling Trigeminal Neuralgia

  • Ahn, Hyung-Joon;Hong, Yoo Ree;Kim, Sora;Kim, Bok Eum;Park, YounJung;Kwon, Jeong-Seung;Kim, Seong-Taek;Choi, Jong-Hoon
    • Journal of Oral Medicine and Pain
    • /
    • 제47권3호
    • /
    • pp.144-147
    • /
    • 2022
  • Chronic maxillary sinusitis is a common disease, with symptoms of dull, aching pain or pressure below the eyes and signs such as tenderness over the involved sinus, whereas trigeminal neuralgia is described as severe, paroxysmal, and lancinating brief pain limited in distributions of one or more divisions of trigeminal nerve. In cases where these two non-odontogenic toothache symptoms overlaps, the diagnostic process can be confusing. Here, we report a case of a 54-year-old male patient with chief complaints of intermittent, severe, and electric-like pain in the upper left premolar and first molar area, initially diagnosed with trigeminal neuralgia but finally with maxillary sinusitis after pain recurrence 2 years after that. Therefore, thorough history taking and precise imaging interpretation should be considered to make correct diagnose especially in case of a patient with newly developed or altered or atypical symptoms.

The impact of frenulum height on strains in maxillary denture bases

  • Cilingir, Altug;Bilhan, Hakan;Baysal, Gokhan;Sunbuloglu, Emin;Bozdag, Ergun
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권4호
    • /
    • pp.409-415
    • /
    • 2013
  • PURPOSE. The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of maxillary complete dentures. MATERIALS AND METHODS. A removable maxillary complete denture was fabricated and duplicated seven times. Four different labial frenulum heights were tested for stresses occurring on the palatal cameo surface. The strains were measured with strain gauges placed on 5 different locations and the stresses were calculated. To mimic occlusal forces bilaterally 100 N of load was applied from the premolar and molar region. RESULTS. A statistically significant association between the height of the labial frenulum and the calculated stresses and strains was shown (P<.05) predominantly on the midline and especially on the incisive papilla. The results showed that stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. CONCLUSION. Within the limitations of this in vitro study, it can be concluded that the stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. Surgical or mechanical precautions should be taken to prevent short-term failure of maxillary complete dentures due to stress concentration and low cycle fatigue tendency at the labial frenulum region.

Microimplant Anchorage(MIA)를 이용한 II급 2류 성인 환자의 비발치 치험례 (Nonextraction treatment of Class II division 2 in an adult patient using microimplant anchorage (MIA))

  • 채종문
    • 대한치과교정학회지
    • /
    • 제35권6호
    • /
    • pp.485-494
    • /
    • 2005
  • 상악 측절치와 견치의 치근 사이에 식립한 microimplant를 이용하여 상악 전치의 합임과 설측으로의 치근 이동을 얻을 수가 있었으며, 상악 견치와 제1소구치의 치근 사이에 식립한 microimplant를 이용하여 과맹출된 상악 견치를 함입시켰다. 또한 상악 제1, 2대구치의 치근 사이에 식립한 microplant를 이용하여 상악 견치 및 구치의 후방 이동 및 상악 전치의 후방 견인을 시행하였다. Anterior bite plane과 intrusion arch, 그리고 II급 고무 등과 같은 전통적인 방법을 사용하여 하악 전치의 합입 및 구치부의 정출을 얻을 수가 있었으며, 과개 교합 및 상악 전치의 설측 경사가 해소 되면서 하악골이 전방으로 약간 이동하였다. 이와 같이, MIA는 II급 2류 부정교합환자에 있어서 II급 견치 및 구치 관계 그리고 과개 교합을 동시에 해소 하는데 절대적인 고정원을 제공하였다.

Cone-beam computed tomography characterization of the intraosseous vascular canal in the lateral wall of the maxillary antrum

  • Shetty, Shishir Ram;Al Bayatti, Saad Wahby;Marei, Hesham;Shetty, Raghavendra;Abdelmagyd, Hossam Abdelatty;Luke, Alexander Maniangat
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제47권1호
    • /
    • pp.34-39
    • /
    • 2021
  • Objectives: The purpose of the study was to assess the occurrence, location, and dimensions of the intraosseous vascular canal in the lateral wall of the maxillary antrum using cone-beam computed tomography (CBCT). Materials and Methods: In this retrospective study, we examined 400 CBCT scans from our archive of patients who had earlier reported to a dental teaching hospital in the United Arab Emirates. The prevalence, location, and dimensions of the lateral antral intraosseous canal (LAIC) in the maxillary antrum were evaluated by 2 examiners using standardised methods. A third examiner was consulted in cases of disagreement. Results: The prevalence of LAIC was 62.3% (249 maxillary antra) among the study population. The mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC in the posterior maxillary region was 19.83±3.12 mm. There was a significant difference (P=0.05) between the maxillary molar and premolar regions in mean distance from the most inferior point of the alveolar bone and the inferior border of the LAIC. There was no statistically significant difference in mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC between dentulous and edentulous areas (P=0.1). The G3-intrasinusal type canal less than 1mm in diameter was the most common type of LAIC. Conclusion: This study established the approximate location of the LAIC in a United Arab Emirates cohort, which will assist the oral surgeon in selecting the appropriate site for sinus lift procedures with reduced risk of surgical hemorrhage.

치관/고정체 비에 따른 상악 구치부 임플란트 주변골의 응력 분포에 대한 3차원 유한요소법적 분석 (Stress distribution in bone surrounding maxillary molar implants under different crown-to-fixture ratio: A 3D FEM analysis)

  • 박종찬;신상완;권긍록
    • 대한치과보철학회지
    • /
    • 제46권5호
    • /
    • pp.479-489
    • /
    • 2008
  • 목적: 상악 구치부에서 자연치와 임플란트 보철시, 보철치관/고정체 비율에 따른 응력분포 양상을 비교하고자 했다. 재료 및 방법: 자연치 모델의 경우는 획득한 3차원 인체모델을 상악 좌측 제2소구치 및 제 1대구치가 포함된 상악골을 Box 형태의 3차원 유한요소모델로 변환하였고, 임플란트 모델은 3차원 인체모델에서 치아 부분을 제거하고 동일 부위에 임플란트 모델을 연결하는 과정을 거쳐서 임플란트가 삽입된 유한요소모델을 구성하였다. 치관/고정체 비율을 0.7:1, 1:1, 1.25:1이 되도록 골수준 (bone level)을 조정하였으며 각 모델의 치관 부위에 300 N의 수직 하중과 수평하중을 각각 가했다. 결과: 1. 모든 하중 조건하에서 자연치와 임플란트 모두에서 피질골과 인접하는 경부에 응력이 집중되는 양상을 보였다. 2. 치관/치근 (고정체) 비가 증가함에 따라 자연치와 임플란트 모두에서 교합면에 수직적 하중을 가한 경우에는 응력의 변화가 뚜렷하지 않았으나, 수평적 하중을 가한 경우에서는 응력이 증가하는 양상을 보였다. 3. 자연치의 경우에 치관/치근비가 증가함에 따라 splinting이 응력감소 효과를 보였고, 임플란트의 경우에는, 치관/고정체 비가 증가함에 따라 splinting이 수직 하중조건에 응력감소효과를 보였으나, 중심에서 벗어난 하중조건에는 최대응력이 오히려 증가하는 양상을 보였다. 4. 임플란트의 경우, 치관/고정체 비가 증가함에 따라 splinting이 수평하중조건 4에서 뚜렷한 응력감소 효과를 보이나, 수평 하중조건 5에서는 응력감소 효과가 감소되고, 특히 치관/고정체 비가 1.25:1인 경우에서는 오히려 응력의 증가를 보였다. 결론: 임플란트 보철물은 치관/고정체 비가 커질수록 더 큰 응력을 받게 되고, splinting의 효과도 감소하게 된다. 또한 교합하중이 임플란트의 장축을 벗어나거나 중심에서 벗어난 경우 응력이 커지는 것으로 사료된다.

제 1대구치와 제 2유구치의 교합면 양상에 관한 연구 (A STUDY FOR OCCLUSAL FEATURES OF FIRST PERMANENT MOLAR AND SECOND PRIMARY MOLAR)

  • 전소희;김재곤;양연미;백병주
    • 대한소아치과학회지
    • /
    • 제32권1호
    • /
    • pp.89-100
    • /
    • 2005
  • 형태학적으로 아주 유사한 상, 하악 제2유구치와 제1대구치의 교합면 형태를 분석하고자 정상교합의 유치열기 아동(Hellman dental age II A) 100명(남자 50명, 여자 50명)과 영구치열기의 성인(Hellman dental age IV A) 86명 (남자 43명, 여자 43명)을 대상으로 하였다. 상, 하악 제2유구치와 제 1대구치의 상, 하악 석고모형의 3차원 형상 data로부터 각 교두정간 거리, 교두정을 최소한의 오차로 지나는 평면과 교합면사이의 체적, 평면에서 교두정간 까지의 방향별 Section curve를 구하여 다음과 같은 결론을 얻었다. 1. 형성된 표준평면과 각 교두정과의 거리에 관한 오차는 하악 제2유구치에서 남자 0.05-0.09mm, 여자 0.04-0.09mm로서 제일 작았다. 2. 각 교두정간의 거리는 하악 제2유구치와 제 1대구치 에서 남자가 크게 나타났다. 특히 제2 유구치에서는 유의성이 존재하였다(p<0.05). 3. 남녀 모두에서 사주 교두거리를 제외하고, 상악 제2유구치는 원심 협측교두와 설측교두 사이가, 하악 제2유구치는 원심교두와 원심 설측교두 사이가, 상악 제1대구치는 근심 설측교두와 협측교두 사이가, 하악 제1대구치는 원심 설측교두와 근심 설측교두 사이의 거리가 가장 크게 측정되었다. 4. 제2유구치와 제1대구치에서 교합면 체적은 하악에서 크게 나타났고, 영구치가 1.40-1.75배 값을 보였으며(p<0.05), 남녀간에는 남자가 큰 값을 보이긴 하였지만 통계적인 유의성이 없었다. 5. 대부분의 경우 유치열에서 보다 영구치열에서 section curve가 넓고 깊었으며 교두사이의 사선거리를 제외하고 상악의 경우 근심 협측과 설측교두 사이에서 유치열과 영구치열 모두에서 가장 깊은 section curve를 이루었으며 하악에서는 영구치열은 원심 협측과 원심교두사이 유치열은 원심 설측과 원심교두 사이에서 가장 깊은 section curve를 이루었다.

  • PDF

상악골에 발생한 원발성 골내암종 (A CASE REPORT OF PRIMARY INTRA-OSSEOUS CARCINOMA OF THE MAXILLA)

  • 박인우;최순철;이영호;박태원;유동수
    • 치과방사선
    • /
    • 제27권2호
    • /
    • pp.135-144
    • /
    • 1997
  • The primary intra-osseous carcinoma (PIOC) is a very rare lesion. PIOC is an odontogenic carcinoma defined as a squamous cell carcinoma arisinig within a jaw having no initial connection with the oral mucosa, and presumably developing from residues of the odontogenic epithelium. The authors diagnosed a 51-year-old female as primary intra-osseous carcinoma after undergoing clinical, radiological and histological examinations. The characteristics were as followed : 1. The patient complained of gingival bleeding on the premolar area in the left maxilla 2. The conventional radiograms showed a relatively well-defined unilocular radiolucent lesion from the mesial aspect of the upper left canine to the mesial aspect of the upper left 1st molar. The 2nd premolar was separated from the 1st molar and the floor of the maxillary sinus was elevated by the lesion. There was a external root resorption of the upper left canine, the 1st premolar, and the 2nd premolar. 3. On the computed tomograms, the osteolytic bony lesion expanded the cortical plate of the left maxilla and displaced the margin of the left maxillary sinus upwards. But the bony lesion was separated from the maxillary sinus by a bony septum. 4. Bone scintigram with /sup 99m/Tc demonstrated the increased uptake in the left maxilla. Sonograms in the neck area and chest P-A radiogram didn't show any abnormalities. 5. Histologically, the tumor islands infiltrating into the surrounding bone increased in alveolar pattern, composed of the malignant cells, and there was a necrosis in the center of the tumor islands.

  • PDF

Cone-beam computed tomography analysis of transverse dental compensation in patients with skeletal Class III malocclusion and facial asymmetry

  • Lee, Ji-Yea;Han, Sung-Hoon;Ryu, Hyeong-Seok;Lee, Hee-Min;Kim, Sang-Cheol
    • 대한치과교정학회지
    • /
    • 제48권6호
    • /
    • pp.357-366
    • /
    • 2018
  • Objective: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. Methods: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. Results: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). Conclusions: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

구강위생상태의 개선을 위한 자가검사법의 효과 (Effect of Self-Testing Technique on Improvement of Oral Hygiene State)

  • 김종엽;박준봉;이만섭;권영혁;허익
    • Journal of Periodontal and Implant Science
    • /
    • 제29권3호
    • /
    • pp.715-724
    • /
    • 1999
  • The purpose of this study was to approve the possibility of clinical application of selftesting technique to confirm the cleanness status of the tooth surface after mechanical toothbrushing. Thirty-two periodontal patients who did not compromise any other systemic diseases were divided into two groups. Control group was instructed only the Bass method for toothbrushing, and then experimental group was demonstrated the Bass method and self-testing technique respectively for plaque control during this experiment. Selftesting technique is composed the comparison of roughness of the labial surface of maxillary central incisor and other toothsurface with touch sense using the tip of tongue. Plaque score and Gingival index were measured as clinical parameters at baseline and 1, 2 and 4 weeks after scaling and root planing. The results were as follows ; 1. Plaque scores and gingival index of 1, 2, and 4 weeks of two groups were statistically significant differences when compared with baseline value (p<0.05). 2. Plaque scores and gingival index of baseline and 1 week between two groups were not significant differences (p<0.05). 3. Plaque scores and gingival index of 2 and 4 weeks of test group were statistically significant difference when compared with control group (p<0.05). From the above results, self-testing technique which decides necessity of additional toothbrushing when tongue tip of subjects touch the maxillary molar buccal surfaces and mandibular molar lingual surfaces nd compares with maxillary anterior labial surfaces after toothbrushing appeared to effect the motivation of subjects. This study suggests that self-testing technique for cleanness after toothbrushing should be effect on the maintenance of oral hygiene when it is applied to clinical practice.

  • PDF

한국 노인의 미소시 입술과 치아와의 관계에 관한 연구 (A STUDY ON THE RELATION BETWEEN LIP AND TEETH AT SMILE IN OLD AGED KOREAN)

  • 김현수;진태호;동진근
    • 대한치과보철학회지
    • /
    • 제31권4호
    • /
    • pp.533-541
    • /
    • 1993
  • This study was designed to help to be given esthetics in construction of denture and prosthodontic rehabilitation of anterior tooth region. The author took the facial straight photograph of 100 old aged people(male 50, female 50) above 55 years of age, who have natural teeth in anterior tooth region, in a resting and a smiling position. And the author measured and analyzed the lip shape, the relation between the lip and the teeth and the change of lip length and height when they were smiling. The results of this study were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 53%, straight was 28% and curved upward was 9%. 2. In the relation between the upper lip and the teeth, average smile was 53% , high smile was 26% and low smile was 21%. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of straight was 54%, the group of parallel was 40% and the group of reverse was 6%. 4. In the relationship between maxillary anterior incisor and lower lip, the group of not-touching was 92%, the group of touching was 5% and the group of the maxillary anterior incisor were slightly covered by the lower lip was 3%. 5. In the teeth displayed in a smile, displayed to second premolar was 50%, displayed to first molar was 34%, displayed to first premolar was 12%, and displayed to canine and second molar were 2%. 6. At smiling, the width of the mouth was 0.94 times of the interpupillary distance and 0.45 times of the full face width. 7. At smiling, the length of the upper lip was 0.73 times and lower lip was 0.98 times of the length in a resting postion and the width of the mouth corner was 1.19 times of the resting position.

  • PDF