Browse > Article
http://dx.doi.org/10.4047/jap.2013.5.4.409

The impact of frenulum height on strains in maxillary denture bases  

Cilingir, Altug (Istanbul University, Faculty of Dentistry, Department of Prosthodontics)
Bilhan, Hakan (Istanbul University, Faculty of Dentistry, Department of Prosthodontics)
Baysal, Gokhan (Istanbul Technical University, Faculty of Mechanical Engineering, Laboratory of Biomechanics)
Sunbuloglu, Emin (Istanbul Technical University, Faculty of Mechanical Engineering, Laboratory of Biomechanics)
Bozdag, Ergun (Istanbul Technical University, Faculty of Mechanical Engineering, Laboratory of Biomechanics)
Publication Information
The Journal of Advanced Prosthodontics / v.5, no.4, 2013 , pp. 409-415 More about this Journal
Abstract
PURPOSE. The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of maxillary complete dentures. MATERIALS AND METHODS. A removable maxillary complete denture was fabricated and duplicated seven times. Four different labial frenulum heights were tested for stresses occurring on the palatal cameo surface. The strains were measured with strain gauges placed on 5 different locations and the stresses were calculated. To mimic occlusal forces bilaterally 100 N of load was applied from the premolar and molar region. RESULTS. A statistically significant association between the height of the labial frenulum and the calculated stresses and strains was shown (P<.05) predominantly on the midline and especially on the incisive papilla. The results showed that stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. CONCLUSION. Within the limitations of this in vitro study, it can be concluded that the stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. Surgical or mechanical precautions should be taken to prevent short-term failure of maxillary complete dentures due to stress concentration and low cycle fatigue tendency at the labial frenulum region.
Keywords
Acrylic; Complete denture; Frenulum; Midline fracture; Strain gauge; Experimental stress analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Jagger DC, Harrison A, Jandt KD. The reinforcement of dentures. J Oral Rehabil 1999;26:185-94.   DOI   ScienceOn
2 Vallittu PK, Lassila VP, Lappalainen R. Evaluation of damage to removable dentures in two cities in Finland. Acta Odontol Scand 1993;51:363-9.   DOI   ScienceOn
3 Nejatidanesh F, Peimannia E, Savabi O. Effect of labial frenum notch size and palatal vault depth on stress concentration in a maxillary complete denture: a finite element study. J Contemp Dent Pract 2009;10:59-66.
4 Lindquist TJ, Narhi TO, Ettinger RL. Denture duplication technique with alternative materials. J Prosthet Dent 1997;77: 97-8.   DOI   ScienceOn
5 Mutlu G, Harrison A, Huggett R. A history of denture base materials. Quintessence Dent Technol Yearbook 1989;13: 145-51.
6 Schneider RL. Diagnosing functional complete denture fractures. J Prosthet Dent 1985;54:809-14.   DOI   ScienceOn
7 Akça K, Cehreli MC. A photoelastic and strain-gauge analysis of interface force transmission of internal-cone implants. Int J Periodontics Restorative Dent 2008;28:391-9.
8 Eser A, Akça K, Eckert S, Cehreli MC. Nonlinear finite element analysis versus ex vivo strain gauge measurements on immediately loaded implants. Int J Oral Maxillofac Implants 2009;24:439-46.
9 Hirajima Y, Takahashi H, Minakuchi S. Influence of a denture strengthener on the deformation of a maxillary complete denture. Dent Mater J 2009;28:507-12.   DOI
10 Lambrecht JR, Kydd WL. A functional stress analysis of the maxillary complete denture base. J Prosthet Dent 1962;12: 865-72.   DOI
11 Matsukawa S, Hayakawa T, Nemoto K. Development of high-toughness resin for dental applications. Dent Mater 1994;10:343-6.   DOI   ScienceOn
12 Uzun G, Hersek N, Tinçer T. Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin. J Prosthet Dent 1999;81:616-20.   DOI   ScienceOn
13 Vallittu PK. Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. J Prosthet Dent 1999;81:318-26.   DOI   ScienceOn
14 Vallittu PK. Dimensional accuracy and stability of polymethyl methacrylate reinforced with metal wire or with continuous glass fiber. J Prosthet Dent 1996;75:617-21.   DOI   ScienceOn
15 Rached RN, de Souza EM, Dyer SR, Ferracane JL. Dynamic and static strength of an implant-supported overdenture model reinforced with metal and nonmetal strengtheners. J Prosthet Dent 2011;106:297-304.   DOI   ScienceOn
16 Kanie T, Arikawa H, Fujii K, Ban S. Mechanical properties of reinforced denture base resin: the effect of position and the number of woven glass fibers. Dent Mater J 2002;21:261-   DOI
17 Goguta LM, Bratu D, Jivanescu A, Erimescu R, Marcauteanu C. Glass fibre reinforced acrylic resin complete dentures: a 5-year clinical study. Gerodontology 2012;29:64-9.   DOI   ScienceOn
18 Darbar UR, Huggett R, Harrison A. Denture fracture-a survey. Br Dent J 1994;176:342-5.   DOI   ScienceOn
19 Prombonas AE, Vlissidis DS. Comparison of the midline stress fields in maxillary and mandibular complete dentures: a pilot study. J Prosthet Dent 2006;95:63-70.   DOI   ScienceOn
20 Beyli MS, von Fraunhofer JA. An analysis of causes of fracture of acrylic resin dentures. J Prosthet Dent 1981;46:238-41.   DOI   ScienceOn
21 Hargreaves AS. The prevalence of fractured dentures. A survey. Br Dent J 1969;126:451-5.
22 Karacaer O, Dogan OM, Tinçer T, Dogan A. Reinforcement of maxillary dentures with silane-treated ultra high modulus polyethylene fibers. J Oral Sci 2001;43:103-7.   DOI
23 Kim SH, Watts DC. The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin. J Prosthet Dent 2004;91:274-80.   DOI   ScienceOn
24 Kelly E. Fatigue failure in denture base polymers. J Prosthet Dent 1969;21:257-66.   DOI   ScienceOn
25 Craig RG, Farah JW, el-Tahawi HM. Three-dimensional photoelastic stress analysis of maxillary complete dentures. J Prosthet Dent 1974;31:122-9.   DOI   ScienceOn
26 Prombonas A, Vlissidis D. Effects of the position of artificial teeth and load levels on stress in the complete maxillary denture. J Prosthet Dent 2002;88:415-22.   DOI   ScienceOn
27 Dirtoft BI, Jansson JF, Abramson NH. Using holography for measurement of in vivo deformation in a complete maxillary denture. J Prosthet Dent 1985;54:843-6.   DOI   ScienceOn
28 Cheng YY, Cheung WL, Chow TW. Strain analysis of maxillary complete denture with three-dimensional finite element method. J Prosthet Dent 2010;103:309-18.   DOI   ScienceOn
29 Rees JS, Huggett R, Harrison A. Finite element analysis of the stress-concentrating effect of fraenal notches in complete dentures. Int J Prosthodont 1990;3:238-40.
30 Ates M, Cilingir A, Sulun T, Sunbuloglu E, Bozdag E. The effect of occlusal contact localization on the stress distribution in complete maxillary denture. J Oral Rehabil 2006;33: 509-13.   DOI   ScienceOn