• 제목/요약/키워드: Max. Temperature

검색결과 750건 처리시간 0.023초

Acclimation temperature influences the critical thermal maxima (CTmax) of red-spotted grouper

  • Rahman, Md Mofizur;Lee, Young-Don;Baek, Hea Ja
    • Fisheries and Aquatic Sciences
    • /
    • 제24권7호
    • /
    • pp.235-242
    • /
    • 2021
  • The present study investigated the critical thermal maxima (CTmax) of red-spotted grouper, Epinephelus akaara under different acclimation temperatures (Tacc). Fish were acclimated at 24℃, 28℃, and 32℃ water temperature for 2 weeks. Water temperature was increased at a rate of 1℃/h and CTmax level was measured following the critical thermal methodology (Paladino et al., 1980). The results showed that CTmax values of E. akaara were 35.61℃, 36.83℃, and 37.65℃ for fish acclimated at 24℃, 28℃, and 32℃, respectively. The acclimation response ratio (ARR) was 0.26. The CTmax values were significantly correlated with body size. Collectively, it is said that the CTmax value of red-spotted grouper can be affected by different adaptation temperature (24℃, 28℃, and 32℃) and the fish acclimated to a higher temperature has a higher CTmax level. Besides, the CTmax value of 35.61℃-37.65℃ indicating the upper thermal tolerance limit for E. akaara under different Tacc (24℃, 28℃, and 32℃). Understanding the thermal tolerance of E. akaara is of ecological importance in the conservation of this species.

RF-CMOS소자의 온도에 따른 DC및 RF 특성 (Temperature Dependence of DC and RF characteristics of CMOS Devices)

  • 남상민;이병진;홍성희;유종근;전석희;강현규;박종태
    • 대한전자공학회논문지SD
    • /
    • 제37권3호
    • /
    • pp.20-26
    • /
    • 2000
  • 본 연구에서는 온도의 증가에 따른 RF-CMOS의 g/sub m/과 f/sub T/ 및 f/sub max/의 감소를 측정하였다. RF응용에서 MOS소자는 포화영역에서 동작되므로 모든 측정바이어스에서 온도에 따른 g/sub m/특성 변화를 실험적인 관계식으로 모델링하였다. CMOS의 f/sub T/와f/sub max/는 g/sub m/에 비례하기 때문에 온도에 따른f/sub T/ 및 f/sub max/ 변화도 온도에 따른 g/sub m/관계식으로부터 구할 수 있었다. 그리고 온도 증가에 따른fт와f/sub max/ 감소는 대부분 g/sub m/ 감소에 기인되며 DC와 RF특성 상관관계로부터 저온에서는f/sub T/와f/sub max/가 크게 증가됨을 예견할 수 있었다.

  • PDF

COB, COH Package LED Module 열 해석 시뮬레이션 (COB, COH Package LED Module Thermal Analysis Simulation)

  • 최금연;어익수
    • 한국산학기술학회논문지
    • /
    • 제12권11호
    • /
    • pp.5117-5122
    • /
    • 2011
  • 본 논문에서는 열 해석 시뮬레이션 프로그램인 COMSOL Multiphysics를 활용하여, LED Module의 제작 시, 가장 선호되는 패키지 종류인 COB Type과 보드를 생략한 COH Type의 열 해석 시뮬레이션을 진행한다. LED Module의 시뮬레이션 결과 방열판을 통과하는 위치에 따라 COB Type은 Max. 약 $78^{\circ}C$ ~ Min. 약 $62^{\circ}C$, COH Type은 Max. 약 $88^{\circ}C$ ~ Min. 약 $67^{\circ}C$에서 온도가 안정이 됨을 확인하였다. COB Type과 비교하여 Max. 온도는 약 $10^{\circ}C$ 차이가 나지만, Min. 온도에서 약 $5^{\circ}C$정도로 격차가 감소함을 확인하였으며, LED Point 온도특성곡선을 확인 한 결과 COB Type은 Max. 약 $100^{\circ}C$ ~ Min. 약 $77^{\circ}C$, COH Type은 Max. 약 $100^{\circ}C$ ~ Min. 약 $86^{\circ}C$온도가 안정이 됨을 확인하였으며, COB Type에 비해 COH Type이 약 $10^{\circ}C$ 온도가 높게 측정되었다.

Feeding of Juvenile Purple Washington Clam, Saxidomus purpuratus (Sowerby): Effects of Algal Concentration and Temperature

  • Lee, Chang-Hoon;Choi, Yong-Suk;Bang, Jong-Deuk;Jo, Soo-Gun
    • 한국양식학회지
    • /
    • 제15권4호
    • /
    • pp.253-260
    • /
    • 2002
  • To find the optimal rearing conditions for Saxidomus purpuratus juvenile, filtering activity was estimated as functions of algal concentration and temperature by measuring the rates of clearance (CR) and ingestion (IR), when S. purpuratus was feeding. The clams were fed on unialgal diet of Isochrysis galbana at 6 algal concentrations (4.6$\times$$10^4$~2.6$\times$$10^6$ cells/ml) and at 6 temperatures (5, 10, 15, 20, 25, and 30^{\circ}C ). Algal concentration significantly affected the CR and the IR at all temperatures. At lower algal concentrations, CR increased, but decreased beyond a particular concentration. The maximum CR ($CR_{max}$) at 5, 10, 15, 20, 25, and 30^{\circ}C were 0.30, 1.73, 5.95, 15.17, 21.12, and 0.33 $l/g/h$, respectively. Below the level of 5.6$\times$10$^{5}$ cells/ml, IR increased as algal concentration increased, but was saturated at higher concentrations. To maintain high growth rate of S. purpuratus, I. galbana should be supplied with more than 5.6$\times$10$^{5}$ cells/ml. The maximum IR ($IR_{max}$) at 5, 10, 15, 20, 25 and30^{\circ}C were $2.2$\times$10^8, $1.5\times$10^9, 3.4$\times$10^9, 4.9$\times$10^9, 5.3$\times$10^9, and 1.0$\times$10^8$ cells/g/h, respectively. As for temperature, both $CR_max$ and $IR_max$ increased remarkably with raising temperature from 5 to 25^{\circ}C, but rapidly decreased at 30^{\circ}C. Between 15 and 25^{\circ}C $CR_{max} and IR_{max}$ were higher and most stable, At this temperature range, the $Q_{10}/s for CR_{max} and IR_{max}$ were 3.5 and 1.6, respectively. Therefore the optimal thermal range for the juvenile is 15~$25^{\circ}C$. The annual variation in IR$_{max}$ predicted by natural seawater temperature shows that inactive period (with lower $IR_max$) lasts for 5 months (from December to April). To ensure higher growth of juvenile during this inactive period at hatcheries, rearing temperature should be elevated to $15^{\circ}C$.>.

무연 Sn-Ag-Bi-Ga계 솔더의 특성에 관한 연구 (A Study on the Characteristic of Pb-free Sn-Ag-Bi-Ga Solder Alloys)

  • 노보인;이보영
    • Journal of Welding and Joining
    • /
    • 제18권6호
    • /
    • pp.42-47
    • /
    • 2000
  • The object of this study is to estimate Sn-Ag-Bi-Ga solder alloy as a substitute for Sn-37Pb alloy. For Sn-Ag-Bi-Ga alloys, Ag, Bi and Ga contents are varied. (Ag : 1~5%, Ga : 3%, Bi : 3~6%) Comparing to Sn-37Pb alloy Sn-Ag-Bi-Ga alloys have wider melting temperature range up to max. $18.7^{\circ}C$. With increasing Ag, Bi contents, the wettability of the alloys increased up to max. 6.6 mN. The vickers hardness of the alloys was max. 46.4 Hv. The ultimate tensile stress of the alloys was max. 60.3 MPa and the elongation was max. 1.2%. The joint strength between circuit board and solder was max. 55.5 N and the joint strength between connector and solder was max. 176.1 N. There were no cracks in this alloys after thermal shock test.

  • PDF

Syntheses and properties of Ti2AlN MAX-phase films

  • Zhang, Tengfei;Myoung, Hee-bok;Shin, Dong-woo;Kim, Kwang Ho
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc1호
    • /
    • pp.149-153
    • /
    • 2012
  • Ti2AlN MAX-phase films were synthesized through the post-annealing process of as-deposited Ti-Al-N films. Near amorphous or quasi-crystalline ternary Ti-Al-N films were deposited on Si and Al2O3 substrates by sputtering a Ti2AlN MAX-phase target at room temperature, 300 ℃ and 450 ℃, respectively. A vacuum annealing of those films at 800 ℃ for 1 hour changed those films to crystalline Ti2AlN MAX-phase. The polycrystalline Ti2AlN MAX-phase films exhibited very excellent oxidation resistance due to its characteristics microstructure (nanolaminates), which has potential applications for high-temperature protective coatings. The microstructure and composition of Ti2AlN MAX-phase films were investigated using with a variety of characterization tools.

차세대에너지시스템 구축을 위한 도시기상조건 시계열분석 (A Time Series Analysis on Urban Weather Conditions for Constructing Urban Integrated Energy System)

  • 김상옥;한경민;이정재;윤성환
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 추계학술발표대회 논문집
    • /
    • pp.26-31
    • /
    • 2009
  • This study was analysed influence of urban higher temperature in Busan about time series analysis of AWS data. The results are as follows. (1) The temperature of Busan show min $13.2^{\circ}C$ ~max $15.8^{\circ}C$ by 50 years, it is on the rise. (2) The seasonal adjustment series, summer appeared min $17.5^{\circ}C$ ~max $28.9^{\circ}C$ with primitive series similarly. The winter was min $-11.4^{\circ}C$ ~max $17.9^{\circ}C$, the minimum temperature was more lowly than primitive series and maximum temperature was more higher than primitive series. The results, seasonal adjustment series is guessed with influence difference urban structural element beside seasonal factor. (3) Regional analytical result, January appeared with range of min 28% ~max 196% of the seasonal factor and August appeared min 90% ~ max 106%. One of the case which is of 100% or more of the seasonal factor January 12nd~17th, August appears at the 15~17th.

  • PDF

Sea fog detection near Korea peninsula by using GMS-5 Satellite Data(A case study)

  • Chung, Hyo-Sang;Hwang, Byong-Jun;Kim, Young-Haw;Son, Eun-Ha
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.214-218
    • /
    • 1999
  • The aim of our study is to develop new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggest the techniques of its continuous detection. So as to detect daytime sea fog/stratus(00UTC, May 10, 1999), visible accumulated histogram method and surface albedo method are used. The characteristic value during daytime showed A(min) > 20% and DA < 10% when visble accumulated histogram method was applied. And the sea fog region which detected is of similarity in composite image and surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), infrared accumulated histogram method and maximum brightness temperature method are used, respectively. Maximum brightness temperature method(T_max method) detected sea fog better than IR accumulated histogram method. In case of T_max method, when infrared value is larger than T_max, fog is detected, where T_max is an unique value, maximum infrared value in each pixel during one month. Then T_max is beneath 700hpa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which detected by T_max method was similar to the result of National Oceanic and Atmosheric Administration/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference). But inland visibility and relative humidity didn't always agreed well.

  • PDF

국내 주요 콩과식물인 돌콩(Glycine soja)과 백태(Glycine max) 간의 생리적 차이에 관한 연구 (The Study on the Physiological Differences for Major Fabaceae, Glycine soja and Glycine max in Korea)

  • 박재훈;김의주;유영한
    • 생태와환경
    • /
    • 제54권2호
    • /
    • pp.120-124
    • /
    • 2021
  • In order to understand the vegetative role of Glycine soja, we studied the basic physiological characteristics between Glycine soja and Glycine max. For this study, the light intensity (μmol m-2 s-1) on leaf surface, leaf temperature (℃), transpiration rate (mmol m-2 s-1), photosynthetic rate (μmol m-2 s-1), substomatal CO2 partial pressure (vpm) of Glycine soja and Glycine max were measured, and the quantum yield, photosynthesis rate per substomatal CO2 partial pressure were calculated. In the results of simple regression analysis, the increasing quantum yield decreases leaf temperature both of Glycine soja and Glycine max and the increasing leaf temperature decreases transpiration rate in case of Glycine soja. However, in case of Glycine max, the increasing leaf temperature decreases substomatal CO2 partial pressure, photosynthetic rate, and photosynthetic rate per substomatal CO2 partial pressure as well as transpiration rate. Also, increasing transpiration rate increases substomatal CO2 partial pressure while decreases photosynthetic rate per substomatal CO2 partial pressure. Thus, Glycine soja is relatively more easily adaptable to severe environments with low soil nutrients and high light levels. Compared to Glycine max susceptible to water loss due to a water-poor terrestrial habitat, the physiological traits of Glycine soja has a high average transpiration rate and are less susceptible to water loss will act as a factor that limits the habitat according to soil moisture.

수온 상승에 따른 게바다말의 광합성 및 호흡률 변화 (Photosynthetic and respiratory responses of the surfgrass, Phyllospadix japonicus, to the rising water temperature)

  • 김혜광;김종협;김승현;;이근섭
    • 환경생물
    • /
    • 제40권3호
    • /
    • pp.352-362
    • /
    • 2022
  • 우리나라 동해와 남해 연안에 주로 분포하는 게바다말의 수온 상승에 따른 탄소수지 변화를 예측하기 위하여 5℃에서 30℃까지의 수온에서 5℃ 간격으로 광합성과 호흡률을 측정하였다. 광합성 매개변수 중 광합성 효율(α)을 제외한 최대광합성률(Pmax)과 보상광도(Ic), 포화광도(Ik)가 수온이 상승함에 따라 증가하였으며, 호흡률(R) 또한 수온 상승에 따라 증가하였다. 가장 높은 수온(30℃)에서 Pmax와 Ik는 급격히 감소하였으나, 반면에 Ic와 호흡률은 지속적으로 증가하였다. Pmax :R ratio는 가장 높은 수온(30℃)에서 최소값을, 가장 낮은 수온(5℃)에서 최대값을 보였다. 이러한 결과를 토대로 게바다말이 양의 탄소수지를 유지하기 위해 필요한 일일 포화광도 시간(Hsat)을 계산한 결과, 5℃에서는 2.50시간 이상, 30℃에서는 10.61시간 이상이 요구되어, 수온이 상승할수록 더 많은 시간의 포화광도(Hsat)가 요구되는 것으로 나타났다. 따라서 수온이 꾸준히 상승되어 여름철 고수온이 장기간 지속되면 우리 연안 게바다말 생육지의 분포에 부정적인 영향을 미칠 것으로 판단되었다.