• ETRI Journal
• /
• v.28 no.3
• /
• pp.393-396
• /
• 2006

This letter proposes a new impedance matching scheme of a traveling wave electro-absorption modulator (TWEAM) module for a 60 GHz band radio-over-fiber (ROF) link. A microstrip band pass filter (BPF) was used to achieve impedance matching at the 60 GHz band, and termination resistance was carefully designed to obtain an input impedance close to $50\;{\Omega}$. Also, a bias circuit for the device was designed in the module. The measured return loss and frequency response show that the modulator module observes the characteristics of a filter without the need of a further tuning process.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.129-135
• /
• 2015

The Ubiquitous City (U-City) spatial information technology aimed to provide services freely anytime and anywhere by converging high-tech information & communication technology in urban infrastructure has been available in diverse patterns. In particular, there have been studies on the development of 3D spatial information after selecting and matching key points with stereo images from the many Closed Circuit TV (CCTV) in the U-City. However, the data mostly used in extracting matching points haven't considered external environmental impacts such as illuminance. This study tested how much the matching points needed to construct 3D spatial information with the CCTV whose image quality is dependent upon changes in illuminance fluctuate under the same hardware performances. According to analysis on the number of matching points by illuminance, the number of matching points increased up to 3,000Lux in proportion to the illuminance when IRIS, shutter speed and ISO were fixed. In addition, a border between an object and background became more distinctive. When there was too much light, however, the page became brighter, and noise occurred. Furthermore, it was difficult to name key points because of the collapse of an inter-object border. It appears that if filmed with the study results, the number of matching points would increase.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.224-227
• /
• 1985

During operation of an RF glow discharge system, it can be observed that the reflected power tends to increase in small value, due to changes in the impedance of the system. This problem can be relieved by adding an automatic impedance matching circuit to the system. This paper presents a detailed method of automatically matching the input impedance of a 50 ohm transmission line to an RF glow discharge system at 13.56 MHZ.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1429-1435
• /
• 2004

In this work, high performance broadband amplifier MMIC including all the matching and biasing components, and electrostatic discharge (ESD) protection circuit was developed for K/Ka band applications. Therefore, external biasing or matching components were not required for the operation of the MMIC. STO (SrTiO3) capacitors were employed to integrate the DC biasing components on the MMIC, and miniaturized LC parallel ESD protection circuit was integrated on MMIC, which increased ESD breakdown voltage from 10 to 300 V. A pre-matching technique and RC parallel circuit were used for the broadband design of the amplifier MMIC. The amplifier MMIC exhibited good RF performances and good stability in a wide frequency range. The chip size of the MMICs was $1.7{\pm}0.8$ mm2.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.190-195
• /
• 2000

This paper presents the fabrication of the LNA which is operating at 2.13∼2.16 GHz for IMT-2000 lot-end receiver using series feedback and resistive decoupling circuit. Series feedback added to the source lead of a transistor keep the low noise characteristics and drop the input reflection coefficient of amplifier simultaneously. Also, it increases the stability of the LNA. Resistive decoupling circuit is suitable for input stage matching because a signal at low frequency is dissipated by a resistor in the matching network The amplifier consist of GaAs FET ATF-10136 for low noise stage and VNA-25 which is internally matched MMIC for high gain stage. The amplifier is fabricated with both the RF circuits and self bias circuit on the Teflon substrate with 3.5 permittivity. The measured results of the LNA which is fabricated using above design technique are presented more than 30 dB in gain P$\_$ldB/ 17 dB and less than 0.7 dB in noise figure, 1.5 in input$.$output SWR(Standing Wave Ratio).

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.299-304
• /
• 2020

This paper proposes the design of circular sector shaped power divider-combiner with a planar structure. This structure can be constructed in series, and due to the circular sector shape, it is possible to simplify circuit configuration and improve the amplitude and phase balanced characteristics of the output. It has a simple input matching circuit and an RC parallel circuit was inserted between the output ports to improve the reflection coefficient and isolation of the output. Since the designed divider-combiner are structurally designed in a symmetrical shape of a sector, even if the output ports are composed of two or four output ports, they have excellent characteristics with an amplitude balance of ± 0.1 dB and a phase balance of ± 1o between outputs. To prove these characteristics, it was confirmed that the characteristics of the planar power divider-combiner fabricated at an operating frequency of 2 GHz are in good agreement with the simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.11-12
• /
• 2009

In this paper, we propose a high voltage driver IC(HVIC) for LCD and PDP TV power supply. The proposed circuit is included novel a shoot-through protection and a pulse generation circuit for the high voltage driver IC. The proposed circuit has lower variation of dead time and pulse-width about a variation of a process and a supply voltage than a conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also the proposed pulse generation circuit prevent from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, and its variation is maximum 170 ns(68 %) about a variation of a process and a supply voltage. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD process parameter, and a simulation is carried out using Spectre.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1263-1268
• /
• 2008

In this paper, the low noise power amplifier for GaAs FET ATF-10136 is designed and fabricated with active bias circuit and self bias circuit. To supply most suitable voltage and current, active bias circuit is designed. Active biasing offers the advantage that variations in the pinch-off voltage($V_p$) and saturated drain current($I_{DSS}$) will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets a gate-source voltage($V_{gs}$) for the desired drain voltage and drain current. Using resistive decoupling circuits, a signal at low frequency is dissipated by a resistor. This design method increases the stability of the LNA, suitable for input stage matching and gate source bias. The LNA is fabricated on FR-4 substrate with active and self bias circuit, and integrated in aluminum housing. As a results, the characteristics of the active and self bias circuit LNA implemented more than 13 dB and 14 dB in gain, lower than 1 dB and 1.1 dB in noise figure, 1.7 and 1.8 input VSWR at normalized frequency $1.4{\sim}1.6$, respectively.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.5-8
• /
• 2000

This paper proposes GaN film as a piezoelectric material for SAW(surface acoustic wave) filters. The fabricated GaN SAW filter exhibited a very high velocity of 5800 ㎧and relatively low insertion loss of -9.9 dB without matching circuit. From Smith's equivalent circuit model, the calculated electromechanical coupling factor (K$^2$) was about 4.$\pm$03％. which is larger than those obtained from other thin film piezoelectric materials and allows the realization of wider filter fractional bandwidths.