• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.597-605
• /
• 2015

Negative impedance converter(NIC)-based non-Foster impedance matching is proposed for an electrically small antenna. The antenna considered in this work is a resistively loaded vee dipole(RVD) antenna, which has considerable reflection at the feed point because of its large negative input reactance. The non-Foster matching circuit built near the feed point consists of two-stage NIC circuit and a capacitor connected between the stages. The NIC is realized by using operational amplifiers(op-amps) and resistors. The circuit is designed by considering of the input impedance according to the finite open-loop gain of the practical NICs. The stability test of the impedance-matched RVD antenna is performed. The non- Foster matching circuit is implemented with the RVD antenna. The measured impedance demonstrates that the proposed non-Foster matching circuit effectively reduces the input reactance of the RVD antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.171-178
• /
• 1998

Generally, the output matching circuit has the most influence to the output power of oscillator and existing method for output matching has difficulty for making the optimum output matching circuit because the matching has to be done nearby the infinite impedance area of the Smith Chart. In this paper, it is studied for the output matching circuit of the microwave oscillator to get the maximum output power. The maximum output point can be found by adjusting the position of moving short in the Tuner while the oscillator is operating after connect the 3-dB coupler Tuner to the oscillator without output matching circuit. To design the oscillator for the maximum output power can be done easily with the microstrip line which is realized from the measured S-parameters of Tuner. In compare the oscillator by the existing method with another one by the suggested method in this paper, the first one has 6.45 dBm output power and second one has 9.71 dBm which is 3.26 dBm higher than the first one at the oscillation frequency 1.0338 GHz.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.3-6
• /
• 2007

In this paper, a hybrid dual band LNA(Low Noise Amplifier) with a tunable matching circuit using varactor is designed for 433MHz and 912MHz RFID reader. The operating frequency is controlled by the bias voltage applied to the varactor. The measured results demonstrate that S21 parameter is 16.01dB and 10.72dB at 433MHz and 912MHz, respectively with a power consumption of 19.36mW. The S11 are -11.88dB and -3.31dB, the S22 are -11.18dB and -15.02dB at the same frequencies. The measured NF (Noise Figure) is 15.96dB and 7.21dB at 433MHz and 912MHz, respectively. The NF had poorer performance than the simulation results. The reason for this discrepancy was thought that the input matching is not performed exactly and a varactor in the input matching circuit degrades the NF characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1686-1696
• /
• 2022

The impedance matching circuit design technique based on the phasor plot introduced in this paper is based on the impedance triangle of electric circuit. It is a technique that designs through the construction of a phasor figure using the values given to the matching circuit design. The design pattern is based on L-type, inverted L-type, T-type, and 𝜋-type, and unknown reactance elements are determined through phasor shapes. In this paper, using a design by phasor plot, we design several cases, such as the case where the input and output ports are pure resistance and have reactance. It was confirmed that the design value was verified by serial-parallel equivalent conversion to achieve matching. This design technique can immediately grasp the phase or size of input/output power, so it is expected to be applied mainly in a low frequency band due to rapid design change and application.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.355-363
• /
• 2006

This paper presents a low-cost RF parameter estimation technique using a new RF built-in self-test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using $0.18\;{\mu}m$ SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2009

In this paper, the external matching circuits were designed in order to compensate the efficiency which decreases by human body effect in the internal antenna phone. Comparing the two types of matching circuit, we selected the structure to minimize the switch stress. RF MEMS switch using low voltage was compared with FET switch and measured the performance in the handset. Here, the detection circuit which can couple th reflection power from antenna was added in the handset and we set up the demonstration system that can compensate the loss of hand effect automatically. In this system, when hand effect occurred, the radiation power increased 2.5dB by operation the matching circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2729-2734
• /
• 2011

In this paper, an active replica Low-dropout(LDO) regulator with DC voltage matching circuit is presented. In order to match the voltage between replica and output of regulator, DC voltage matching circuit is designed. The active replica low dropout regulator has higher Power Supply Rejection(PSR) than that of conventional regulator. The designed DC voltage matching circuit can reduce the drawback that may be occurred in replica regulator. And using fully active element in regulator can reduce the chip area and heat noise with resistor. As results of HSPICE simulation with 0.35um CMOS parameter, the designed active replica LDO regulator achieves Power Supply Rejection, -28@10Hz better than -17@10Hz of conventional replica regulator without DC matching circuit. And the output voltage is 3V.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.218-223
• /
• 2005

Impedance matching characteristics of planar type inductively coupled plasma sources are investigated utilizing the previously reported two-dimensional theory[1] of the anomalous skin effect. Two types of matching networks are considered, and the values of the circuit elements are expressed as functions of various reactor parameter. Also, two cases of perfect and imperfect matching conditions are considered and the functional dependence of the values of matching capacitance and reflection coefficient on the various reactor parameters are investigated using the present circuit model.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.28-33
• /
• 2008

We have proposed a novel DVB-H(Digital Video Broadcast for Handheld) antenna for folder-type mobile handheld terminal by using a coupling element, a stub, and an L-type matching circuit. The L-type matching circuit consisting of two chip inductors is used for achieving an improved impedance matching over the DVB-H frequency band ($470{\sim}702\;MHz$). Simulated results showed the stub worked to more knot the lower and upper frequency ends of the input impedance curve. The antenna exhibits a flat gain characteristic from 2 to 2.8 dBi over the DVB-H frequency band. The radiation patterns are a stable Figure-of-eight radiation pattern in the frequency range.