• 한국ITS학회 논문지
• /
• 제13권2호
• /
• pp.50-56
• /
• 2014

본 논문에서는 LTE 700MHz(Band12, 13, 14, 17, 28, 44) 대역에서 동작 가능한 4개의 포트를 가진 펨토셀(Femtocell) MIMO 안테나를 설계 제작하였다. 마이크로스트립 패치 안테나를 기반으로 임피던스 매칭을 위하여 쇼트핀을 이용하였고, 한정된 크기에서 충분한 안테나 격리도를 얻기 위해 십자형 디커플러를 이용하였다. 시뮬레이션에 의한 최적화된 파라미터를 가지고 제작하였으며, 제작된 안테나는 VSWR${\leq}2$에서 105MHz(0.698~0.803) 대역폭을 만족하고 1.97dBi의 이득과 격리도는 13dB이상의 값을 얻었다. MIMO 안테나의 성능을 판단하는 주요 파라미터인 안테나간 상관계수는 0.2 이하의 결과를 얻었다.

• 한국광학회지
• /
• 제4권1호
• /
• pp.84-89
• /
• 1993

Mg(4 mole%):LiNb$O_3$에서 제 2고조파발생특성을 온도와 직류전장의 함수로 측정하여, Mg:LiNb$O_3$ 결정의 공간적 균일성을 조사 하였다. 발생된 제2고조파및의 세기가 위상정합된 상태의 최대값으로부터 최초로 0이 되는 온도가 결정의 광축으로 가해준 직류전장의 변화에 선형적으로 변위함을 관찰하였다. 이로부터, 최초로 Mg가 4mole% 첨가된 Mg:LiNb$O_3$ 의 전기광계수가 Congruent LiNb$O_3$의 해당하는 값보다 1.5배가 더 큼을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.406-412
• /
• 2018

In this paper, we propose a narrow resonant waveguide probe that can improve the measurement sensitivity in near-field scanning microwave microscopy. The probe consists of a metal waveguide incorporating the following two sections: a straight section at the tip of the probe whose cross-section is a double-ridged rectangle, and whose height is much smaller than the waveguide width; and a standard waveguide section. The advantage of the narrow waveguide is the same as that of the quarter-wave transformer section i.e., it achieves impedance-matching between the sample under test (SUT) and the standard waveguide. The design procedure used for the probe is presented in detail and the performance of the designed resonant probe is evaluated theoretically by using an equivalent circuit. The calculated results are compared with those obtained using the finite element method (Ansoft HFSS), and consistency between the results is demonstrated. Furthermore, the performance of the fabricated resonant probe is evaluated experimentally. At X-band frequencies, we have measured the one-dimensional scanning reflection coefficient of the SUT using the probe. The sensitivity of the proposed resonant probe is improved by more than two times as compared to a conventional waveguide cavity type probe.

• International Journal of Contents
• /
• 제13권4호
• /
• pp.70-79
• /
• 2017

Images are an important element in patents and many experts use images to analyze a patent or to check differences between patents. However, there is little research on image analysis for patents partly because image processing is an advanced technology and typically patent images consist of visual parts as well as of text and numbers. This study suggests two methods for using image processing; the Scale Invariant Feature Transform(SIFT) algorithm and Optical Character Recognition(OCR). The first method which works with SIFT uses image feature points. Through feature matching, it can be applied to calculate the similarity between documents containing these images. And in the second method, OCR is used to extract text from the images. By using numbers which are extracted from an image, it is possible to extract the corresponding related text within the text passages. Subsequently, document similarity can be calculated based on the extracted text. Through comparing the suggested methods and an existing method based only on text for calculating the similarity, the feasibility is achieved. Additionally, the correlation between both the similarity measures is low which shows that they capture different aspects of the patent content.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.38-43
• /
• 2011

We have developed a simple model of a bright-room contrast ratio (BRCR) measurement system for plasma display panels (PDPs) adopting a contrast enhancement film (CEF) by using an illumination design tool. Only four model parameters were used, namely, total ambient illumination power delivered by fluorescent lamps, a panel scattering rate, illuminance of PDP white patterns, and the absorption coefficient of a color adjusting film. These parameters were determined by simple optical measurements and matching simulations. The proposed model was employed to predict the BRCR values of four different CEF samples, and the simulated ones were found to be in agreement with measured ones within about 10% relative-error.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.435-446
• /
• 2019

The existing piezoelectric spherical transducers with fixed prescribed dynamic characteristics limit their application in scenarios with multi-frequency or frequency variation requirement. To address this issue, this work proposes an improved design of piezoelectric spherical transducers using the resistance tuning method. Two piezoceramic shells are the functional elements with one for actuation and the other for tuning through the variation of load resistance. The theoretical model of the proposed design is given based on our previous work. The effects of the resistance, the middle surface radius and the thickness of the epoxy adhesive layer on the dynamic characteristics of the transducer are explored by numerical analysis. The numerical results show that the multi-frequency characteristics of the transducer can be obtained by tuning the resistance, and its electromechanical coupling coefficient can be optimized by a matching resistance. The proposed design and derived theoretical solution are validated by comparing with the literature given special examples as well as an experimental study. The present study demonstrates the feasibility of using the proposed design to realize the multi-frequency characteristics, which is helpful to improve the performance of piezoelectric spherical transducers used in underwater acoustic detection, hydrophones, and the spherical smart aggregate (SSA) used in civil structural health monitoring, enhancing their operation at the multiple working frequencies to meet different application requirements.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.641-654
• /
• 2018

Elevator noise in apartment houses is one of the factors which prevent the residents from quiet and comfortable life. The elevator noise measurement method [KS F ISO 16032] is introduced from the matching ISO standard, however, it has problems in the application to the actual measurement. To visualize the problems, measurements in an apartment house are conducted, which has been suffering from the elevator noise for a long time. The measurement itself is extremely difficult due to the low sound pressure level of elevator, which is lower than 35 dB (A), and the even higher background noise level. However the vibration levels measured at the same time are relatively less disturbing As a result of vibration measurement, it was found that the vibration is clearly measured on the wall, and presents a high correlation coefficient of over 0.8 with the noise levels measured This shows that the vibration level measured on the elevator walls may be rather reliable numbers than the elevator noise levels in the actual noisy condition of elevator halls and the vicinity.

• 천문학회보
• /
• 제46권1호
• /
• pp.38.3-38.3
• /
• 2021

We are developing an optomechanical design of infrared telescope for the CubeSat and Unmanned Aerial Vehicle (UAV) which adapts the Linear Astigmatism Free- Three Mirror System in the confocal off-axis condition. The small entrance pupil (diameter of 40 mm) and the fast telescope (f-number of 1.9) can survey large areas. The telescope structure consists of three mirror modules and a sensor module, which are assembled on the base frame. The mirror structure has duplex layers to minimize a surface deformation and physical size of a mirror mount. All the optomechanical parts and three freeform mirrors are made from the same material, i.e., aluminum 6061-T6. The Coefficient of Thermal Expansion matching single material structure makes the imaging performance to be independent of the thermal expansion. We investigated structural characteristics against external loads through Finite Element Analysis. We confirmed the mirror surface distortion by the gravity and screw tightening, and the overall contraction/expansion following the external temperature environment change (from -30℃ to +30℃).

• 정보처리학회논문지B
• /
• 제11B권2호
• /
• pp.141-148
• /
• 2004

영상 매칭 방법을 이용하여 항공 사진 및 위성 영상으로부터 획득한 지상 위치 및 고도 정보인 수치표고모델(DEM)은 여러 환경의 영향으로 인하여 오차를 포함하고 있다. 본 연구에서는, 전문가가 이러한 오차를 수정 편집할 수 있도록 하기 위하여 기준 수치표고모델과 대상 수치 표고모델간의 유사도 값을 사용하여 수치표고모델을 평가하는 방법을 제시하고자 한다. 수치표고모델의 전 지역에 대해 수평 및 수직 오차를 구하기 위해서는 기준 수치표고모델의 격자와 대상 수치표고 모델 격자간의 유사도 값을 사용하여 각 기준 격자에 대한 정합 대상 격자를 구한다. 각 기준 격자에 대한 정합 대상 격자가 구해지면, 수평 및 수직 오차를 계산하여 전문가가 수정 편집할 영역을 판단할 수 있도록 한다. 즉, 유사도 값이 낮고, 고도의 차가 높은 경우. 그 격자는 후보 변화 또는 오류 격자로 판단된다. 이러한 후보 격자들이 영역을 이룰 경우. 수정 편집 대상인 변화 또는 오류 지역으로 판단한다. 이러한 방법을 사용함으로써, 모든 점에 대한 평가가 가능할 뿐 아니라, 수직 오차 외에도 수평 오차를 구할 수 있으므로, 보다 효과적으로 변화 또는 오류 지역을 찾을 수 있었다.

• 원예과학기술지
• /
• 제31권3호
• /
• pp.337-343
• /
• 2013

본 연구의 목적은 SSR과 SRAP 마커 시스템을 이용하여 팔레놉시스 14품종 간 유전적 거리를 비교하고, SSR 마커를 이용하여 품종 간 구분을 하기 위한 것이다. 전체적으로 111개의 SSR 프라이머와 30조합의 SRAP primer를 먼저 스크리닝하였다. 국립원예특작과학원에서 보존중인 국내 육성품종을 포함한 14품종의 팔레놉시스에서 12개의 SSR 프라이머와 30조합의 SRAP 프라이머에서 높은 다형성을 보였다. 증폭된 DNA 단편들은 acrylamide gel에서 분리시킨 후 silver staining 방법으로 검출하였다. SSR 마커 55개와 SRAP 419개로, 총 474개의 마커를 획득하였으며 이를 유전적 다양성 분석에 사용하였다. 다형성 밴드들은 MVSP 3.1프로그램을 이용하여 유전적 유사도와 UPGMA clustering 분석을 위해 scoring 되었다. 14 팔레놉시스 품종은 SRAP과 SSR 분석을 통해 각각 0.683과 0.66의 유사도 지수에서 3그룹으로 분류되었다. 또한 SSR 20번과 22번만으로도 이들 육성 품종을 구분할 수 있었다. 이 결과는, SSR 분석은 팔레놉시스 품종간 구분에 효과적이고 SRAP은 염기서열의 정보가 없을 때 유전적 다양성 분석에 유용하다는 것을 보여준다. 이번 연구된 SSR과 SRAP 마커들은 팔레놉시스의 유전자형 판별, 유전자원 보존, 유전적 근연관계를 분석하는데 유용한 기술이 될 것이다.