• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.34-38
• /
• 2010

An analytical solution procedure for the dynamic response of beams with variable properties is developed by using an asymptotic solution and the Green's function. This asymptotic closed form solution is derived for the transverse vibration of beams under the assumption of slowly varying properties, such as mass, cross-section, tension etc., along the beam length. However, this solution is still found to be very accurate even in the case of large variation, such as step change in cross-section, mass, and tension. Therefore, this derived asymptotic closed form solution and the Green's function can be easily applied to find dynamic responses for various kind of beam vibration problems.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.186-191
• /
• 2015

Presently, rapidly changing and unstable global economic environments demand engineers. Products should be designed to increase profits by lowering costs and provide distinguished performance compared with competitors. This study aims to optimize the design of the power-transmission drive shaft. The mass is reduced as an objective function, and the stress is constrained under a constant value. To reduce the number of experiments, CCD (central composite design) and D-Optimal are used for the experimental design. RSM (response surface methodology) is employed to construct a regression model for the objective functions and constraint function. In this problem, there is only one objective function for the mass. The other objective function gives 1; thus, NSGA-II is used.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.17-22
• /
• 1997

This paper reals with the structure and function of duel mass flywheel. Damping effects of engine rotational fluctuation are compared with those of pre-damper clutch and duel mass flywheel and driven- system behavior is estimated engine idle r.p.m. The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. The above-contents can be used on the design of clutch system and transmission matching including engine and duel mass flywheel.

• Journal of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.182-182
• /
• 1988

• Journal of The Korean Astronomical Society
• /
• v.29 no.1
• /
• pp.53-62
• /
• 1996

31 white dwarfs in 10 open clusters are examined, and their maximum mass and the upper mass limit of their progenitors are obtained as $1.22\pm0.02M_{\bigodot}\;and\;7.2\pm0.4M_{\bigodot}$ respectively, suggesting that the upper mass limit of white dwarfs is less than 8M_{\bigodot}$ The final mass of white dwarfs shows no clear correlation with the initial mass of their progenitors, and it is found that a deficient gap of initial mass exists between $\~4\;and\;~5.2M_{\bigodot}$. This gap seems to correspond to the mass range for carbon detonation or deflagration. The total expected numbers of white dwarfs are $11\~22$ in Hyades with 7 known white dwarfs and 17 in Praesepe with 8 known white dwarfs. These known white dwrfs are all younger than the others in both clusters. But one known white dwarf in Pleiades is older one among $2\~3$ expected white dwarfs.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.118-122
• /
• 1999

Thermal mass flow meter was developed using principle of convective heat transfer. The advantage of thermal mass flow meter is measuring mass flow directly, therefore, it is not required to use densitometer or temperature/pressure and DP gages. The final accuracy of this thermal mass flow meter is $\pm1.0{\%}$ or better, reproducibility is $\pm0.2{\%}$, and the response time is 600 ms. The thermal mass flow meter was developed from a single point to multi-points (maximum is 9 points), and the number of points is determined according to desired accuracy and size of piping/duct. Since this thermal mass flow meter adopted microprocessor based design, it is intrinsically accurate, self-error detectable, and has self-diagnosis function. The applications of this thermal mass flow meter are for measurement and control of HVAC air flow, other gas flow, and liquid flow.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.38.2-38.2
• /
• 2018

To understand the assembly of the galaxy population in clusters today, it is important to first understand preprocessing, the impact of environments prior to cluster infall. We use 15 cluster samples from YZiCS, a hydrodynamic cluster zoom-in simulation to determine the significance of preprocessing, and focus on the tidal mass loss of dark matter halos. We find ~48% of the cluster member halos were once satellites of another host. The preprocessed fraction depends on each cluster's recent mass growth history. Also, we find that the total mass loss is a clear function of the time spent in a host. However, two factors can increase the mass loss rate considerably. First, if the satellite mass is approaching the mass of its host. Second, when the halo suffers tidal mass loss at a higher redshift. Being in hosts before cluster infall enables halos to experience tidal mass loss for an extended period of time.

• Nutritional Sciences
• /
• v.2 no.2
• /
• pp.93-101
• /
• 1999

The aim of this study was to investigate influence of body build on body composition, energy metabolic state and insulin concentration of blood. 29 male athletes and 36 male non-athletic students were recruited for the study. Anthropometry including chest depth and breadth, fat mass, fat fee mass, tricep skinfold thickness were measured. fasting glucose, lactate, triglyceride, fee fatty acid, and insulin concentration in serum were measured . Body build was assessed using metric index, which calculated by regression equations of Mohr and Greil. The athletic and non-athletic students were allocated to 3 body build, that is leptomorph, mesomorph, and pyknomorph. Resting metabolic rate was calculated. Respiratory quotient was determined through ratio of measured VO$_2$, and V$CO_2$. Most non-athletes have a leptomorphic body build, in contrast to athletes mesomorphic type. The body build type influenced body composition differently between non-athletic group and athletic group. Weight, body mass index, body fat mass and fat mass proportion (%), and fat-free mass increased from leptomorph to pyknormorph in non-athletic group. Pyknormorphic athletes have a significant higher body mass index, fat mass, fat free mass than other body build type. Serum glucose, triglyceride, lactate, insulin showed significant differences only in non-athletic group between leptomorph and mesomorph. RMR increased significantly from leptomorph to mesomorph in non-athletes. There was no significant difference of RQ among 3 body build types in both athletes and non-athletes. This study gives a coherent data on body build and body composition for athletes and non-athletes students. The influence of body builds on energy metabolic status of serum was different between athletes and non-athletes.

• Particle and aerosol research
• /
• v.8 no.1
• /
• pp.29-35
• /
• 2012

The Faraday cup electrode of different size has been developed and evaluated to investigate the diffusion effect of particles by Brownian motion in a particle beam mass spectrometer(PBMS). Particles which focused and accelerated by aerodynamic lens are charged to saturation in an electron beam, and then deflected electrostatically into a Faraday cup detector for measurement of the particle current. The concentration of particles is converted from currents detected by Faraday cup. Measurements of particle current as a function of deflection voltage are combined with measured relationships between particle velocity and diameter, charge and diameter, and mass and diameter, to determine the particle size distribution. The particle currents were measured using 5, 10, 20, 40 mm sized Faraday cup that can be move to one direction by motion shaft. The current difference for each sizes as a function of position was compared to figure out diffusion effect during transport. Polystyrene latex(PSL) 100, 200 nm sized standard particles were used for evaluation. The measurement using 5 mm sized Faraday cup has the highest resolution in a diffusion distance and the smaller particles had widely diffused.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.535-544
• /
• 2007

Discontinuities developed in a sedimentary rock mass are the most important factor to determine mechanical properties of the rock mass. Parameters described discontinuities in rock mass generally connote heterogeneity and uncertainty. In this study, probabilistic statistics method was used to determine parameters of discontinuities quantitatively and objectively. The field survey was conducted at 33 sedimentary rock slopes in Ulsan area, according to the suggested methods for the quantitative description of discontinuities in rock mass(ISRM, 1978). The engineering geological characteristics of the sedimentary rocks at Ulsan area was determined as probability distribution function deduced by analyzing parameters of discontinuities.