• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.102-114
• /
• 1998

Ecotourism has surged from conflicts between negative impacts of mass tourism and environmental issues. As an alternative tourism, ecotourism compromises extensively environmental, economic, educational, and cultural concerns. Ecotourism can be defined as environment-based tourism that ensures sustainable growth and development through conservation of natural and human environment, promotion of regional economy, and provision of tourism service in natural environment areas. Ecotourism should consider two key challenges; an effective means that may protect local economy through tourist-based income and improvement of residential circumstances, and role as leisure space that can improve tourist's experiences. The purpose of this study was to summarize ecotourism concepts through literature search and develop an ecotourism planning framework for Korean rural communities. In addition, developed planning framework in this study was applied to Jeongdori area, Wandogun, Korea as a case study in order to analyze its feasibility. A trial application in Jeongdori area demonstrated a possibility that ecotourism planning framework can be successfully adopted to a wide range of Korean rural communities. To ensure objectivity of framework, systematic case studies must be done in the future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1089-1095
• /
• 2011

Numerical simulation is performed for nucleate boiling on a micro-finned surface, which has been widely used to enhance heat transfer, by solving the equations governing the conservation of mass, momentum, and energy in the liquid and vapor phases. The bubble motion is determined by a sharp-interface level-set method, which is modified to include the effect of phase change and to treat the no-slip and contact-angle conditions, as well as the evaporative heat flux from the liquid microlayer on immersed solid surfaces such as micro fins and cavities. The numerical results for bubble formation, growth, and departure on a microstructured surface including fins and cavities show that the bubble behavior during nucleate boiling is significantly influenced by the fin-cavity arrangement and the fin-fin spacing.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.343-356
• /
• 2010

Plant micropropagation techniques include bud cultures using apical or axillary buds, organogenesis through callus culture or adventitious bud induction, and somatic embryogenesis. In Korea Forest Research Institute (KFRI), the first tissue culture trial in woody plant was initiated from the bud culture of hybrid poplars (Populus alba x P. glandulosa) in 1978. Since then several mass propagation techniques have developed from conifer and hardwood species, resulting in allowing practical application to Poplars, Birches and some oak species. In addition, useful micropropagation and genetic resources conservation techniques were established in some rare and endangered tree species including Abeliophyllum distichum. Among various in vitro propagation techniques, somatic embryogenesis is known to be the most efficient plant regeneration system. Since the first somatic embryo induction was reported in Tilia amurensis by KFRI in 1986, various protocols for direct or indirect somatic embryogenesis systems have developed in conifer and hardwood species including Larix leptolepis, Pinus rigida x P. taeda F1, Kalopanax septemlobus and Liliodendron tulipifera, etc. However, most of these technologies have been developed using juvenile tissues, i.e. immature zygotic embryos or mature embryos. Therefore it has been difficult to directly application to tree breeding program due to their unproven genetic background. Recently remarkable progresses and new approaches have been achieved in mature tree somatic embryogenesis. In this article we reviewed several micropropagation techniques, which have been mainly developed by KFRI and recent international progresses.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.38-43
• /
• 2014

To establish the system of in vitro plant regeneration, the different explants (stem with axillary bud and stem without axillary bud) of Hylotelephium ussuriense were cultured on the Murashige and Skoog's medium containing 6-benzylaminopurine (BA) and indolebutyric acid (IBA). The adventitious shoot induction was more effective in the stem with axillary bud explants than the stem without axillary bud explants, and was the best on MS medium containing 3.0 mg/L BA and 0.01 mg/L IBA. Frequency of plantlet growth was not significantly treated on MS and sucrose. Total chlorophyll contents under ventilation treatment were higher than those in control (non-ventilation). This in vitro propagation protocol will be useful for conservation and mass propagation of this endangered plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2189-2194
• /
• 2009

The automatic hot gas by-pass technique is applied to control the capacity of refrigeration and air-conditioning system when operating at part load. In the scheme, the hot gas from the compressor is extracted and injected into the outlet of an evaporator through a hot gas by-pass valve. Thus, In this paper, the hot gas by-pass scheme for CO2 is discussed and analyzed on the basis of mass and energy conservation law. A comparative study of the schemes is performed in terms of the coefficiency of performance (COP) and cooling capacity. The operating parameters considered in this study include compressor efficiency, superheating degree, outlet temperature of gas cooler and evaporating temperature in the R744 vapor compression cycle. The main results were summarized as follows : the superheating degree, outlet temperature and evaporating temperature of R744 vapor compression refrigeration system have an effect on the cooling capacity and COP of this system. With a thorough grasp of these effect, it is necessary to design the compression refrigeration cycle using R744.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.746-751
• /
• 2014

In this paper, ship performance prediction solver was developed using open source computational fluid dynamics (CFD) libraries. The mass- and momentum-conservation equations and turbulent model with a wall function for the turbulent closer were considered. The volume fraction transport equation with a high-resolution interface capturing scheme were selected for free-surface simulation. The predicted wave pattern around KRISO container ship (KCS) using developed program showed good agreement against existing experimental data. For the revolution of a propeller in the propulsive test, general grid interface (GGI) library was used. The predicted propulsive performance showed 7 % difference against experimental data. Two-phase mixture model was developed to simulate a cavitation and applied to a propeller. The sheet cavitation on the propeller was predicted well. From results, the potential of the numerical tank developed by open source libraries was verified by applying it to KCS.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.323-331
• /
• 2021

The relevance of the study implies the need to explain the main determinants of environmental policy, allowing countries to converge on a common working basis. The purpose of the research is to explore ways in which the environmental aspects of EU regions and territories can be shaped to apply to domestic environmental policy. A total of 997 representatives from the Ukrainian UTCs, who are involved in local environmental policy, participated in the survey. Results of the research. A hierarchy of regional environmental policy objectives has been identified. Three key principles of eco-policy development have been distinguished. The means of the innovative approach strategy implementation have been outlined (formation of the regional market of environmental services; organization of interaction between environmental agencies and market structures; establishment of environmental funds which finance environmental activities; implementation of the "collateral return" system; formation of a system of benefits and loans to enterprises that successfully implement the environmental policy). The means of the prognostic approach implementation strategy to the development of the region's environmental policy have been determined (the use of an orderly and successful long-term strategy of economic development of the region; obligatory consideration in the mechanisms strategy aimed at improvement of environmental management system of the region, interbranch impact of the projects implemented on the region's ecological situation; taking into consideration the economic and geographical peculiarities of the region, the necessary infrastructure, issues of the territorial location of the large enterprises in the region and their impact on the environment). The means of the traditional approach strategy implementation have been outlined (activity programs focused on solution of specific problems, rather than on the implementation of measures for environmental restoration and enhancement; nature conservation problems have interbranch, interdepartmental character due to unity of the region's ecosystem; tracking complexity of changing conditions (water basins, woodlands, air-mass transport), regional boundaries generally do not coincide with natural ecosystems boundaries). The practical significance of the study lies in providing recommendations for the implementation of certain aspects of Ukrainian UTC's environmental policy.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.213-221
• /
• 2022

Wild garlic (Allium victorialis var. platyphyllum, AVVP) is a nontimber forest product used as an edible and medicinal vegetable. AVVP is usually propagated form offspring bulbs but it takes a long time to harvest. Using tissue culture technology could overcome this problem. This study investigated the optimal conditions for shoot multiplication, root growth, and plant growth by scooping AVVP bulbs. AVVP bulbs harvested from Ulleung Island, Korea, the main producer of AVVP, were surface-sterilized and used for in vitro propagation. Shoot multiplication was performed by the scooping method. More than five multiple shoots were induced from scooped tissue in Quoirin and Lepoivre (QL) medium containing plant growth regulators (PGRs); the maximum number of multiple shoots were induced from scooped tissue in QL medium containing 0.45 μM thidiazuron (TDZ) after 16 weeks of culture. Roots were induced directly at the base of the shoots in all treatments. In vitro rooting depended on the type of PGRs, and the best root-inducing treatment was QL medium containing 9.84 μM indole-3-butyric acid (IBA). Plants with in vitro roots were transferred to pots containing artificial soil and successfully acclimatized for 4 weeks. The acclimatized plants showed a survival rate of 80% after 20 weeks and gradually promoted growth depending on the acclimatization period. The results of this study will be of great help to AVVP dissemination through sustainable mass propagation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.161-167
• /
• 1992

We consider the preparation of long finite amplitude nondispersive waves over a step bottom between two regions of finite different depths. Two dimensional motion is assumed. with the wave crests parallel to the step, and irrotational flow in the inviscid fluid is considered. To describe the transformation of finite amplitude waves we use the finite-amplitude shallow-water equations, the conditions of mass flow conservation and pressure continuity at the cut above the step in Riemann's variables. The equations define four families of curves-characteristics on which the values of the Riemann's invariants remain constant and a system of two nonlinear equations that relates the amplitudes of incident reflected and transmitted waves. The system obtained is difficult to analyze in common form. Thus we consider some special cases having practical usage for tsunami waves. The results obtained are compared with the long wave theory and significant nonlinear effects are found even for quite small amplitude waves.