• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.288-299
• /
• 2003

Statement of problem: Many kinds of post and core systems are in the market, but there are no clear selection criteria for them. Purpose: The purpose of this study was to compare the flexural strength and modulus of elasticity of core materials, and measure the bending strength of post systems made of a variety of materials. Material and Methods: The flexural strength and elastic modulus of thirteen kinds core buildup materials were measured on beams of specimens of $2.0{\times}2.0{\times}24{\pm}0.1mm$. Ten specimens per group were fabricated and loaded on an lnstron testing machine at a crosshead speed of 0.25mm/min. A test span of 20 mm was used. The failure loads were recorded and flexural strength calculated with the measured dimensions. The elastic modulus was calculated from the slopes of the linear portions of the stress-stram graphs. Also nine kinds commercially available prefabricated posts made of various materials with similar nominal diameters, approximately 1.25mm, were loaded in a three-point bend test until plastic deformation or failure occurred. Ten posts per group were tested and the obtained data were anaylzed with analysis of variance and compared with the Tukey multiple comparison tests. Results: Clearfil Photo Core and Luxacore had flexural strengths approaching amalgam, but its modulus of elasticity was only about 15% of that of amalgam. The strengths of the glass ionomer and resin modified glass ionomer were very low. The heat pressed glass ceramic core had a high elastic modulus but a relatively low flexural strength approximating that of the lower strength composite resin core materials. The stainless steel, zirconia and carbon fiber post exhibited high bending strengths. The glass fiber posts displayed strengths that were approximately half of the higher strength posts. Conclusion: When moderate amounts of coronal tooth structure are to be replaced by a post and core on an anterior tooth, a prefabricated post and high strength, high elastic modulus core may be suitable. CLINICAL IMPLICATIONS In this study several newly introduced post and core systems demonstrated satisfactory physical properties. However when the higher stress situation exists with only a minimal ferrule extension remaining a cast post and core or zirconia post and pressed core are desirable.

• 한국식품과학회지
• /
• 제34권3호
• /
• pp.400-406
• /
• 2002

된장제품의 경우 갈변의 해결은 소비자의 불만을 해소시킬 수 있는 중요한 개선책으로 본 연구에서는 소비자의 기호도에 맞는 색상의 재래식 된장을 개발하였다. 우리나라 장류 제조사에서 제조된 시판 재래식 된장의 이화학 성분 및 색도를 조사 분석하고 이를 위해 대두를 수침, 증숙, 냉각 및 쵸핑한 것에 분쇄시킨 재래식 메주를 다양한 비율로 배합하여 시료 된장을 제조한 후 $30^{\circ}C$에서 27일 동안 저장 보관하면서 발효기간에 따른 아미노태질소, pH, 색상을 분석하고 현재 시판 중인 재래식 된장제품과 비교 하였으며, 관능검사도 실시하였다. 재래식 메주와 증숙대두의 배합비를 달리하여 제조한 된장 처리구를 비교시, 재래식 메주만으로 처리시킨 처리구에서 아미노태질소함량이 가장 높았고 증숙대두의 함량이 증가할수록 아미노태질소함량이 줄었다. 발효기간에 따른 pH변화는 모든 처리구에서 초기 알칼리성으로부터 약산성쪽으로 변화되었다. 재래식된장의 색상이 가장 많이 개선된 것은 재래식 메주와 증숙대두의 비가 1.0 : 4.0인 처리구였으며, 이를 시판 된장과 관능적 비교를 한 결과 색, 향 및 맛에서 우수한 것으로 평가되어 기존제품과 비교하여서도 시장성이 있다고 판단되었다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권4호
• /
• pp.79-86
• /
• 2016

소프트웨어 보안 사고의 약 75%는 소프트웨어 취약점으로 인해 발생한다. 또한, 제품 출시 후 결함 수정 비용은 설계 단계의 수정 비용보다 30배 이상 많다. 이러한 배경에서, 시큐어 코딩은 유지 보수 문제를 해결하는 방법 중 하나로 제안되었다. 다양한 연구 기관에서는 소프트 웨어 보안 약점의 표준 양식을 제시하고 있다. 새로운 한글 프로그래밍 언어 새싹은 언어 수준에서 보안 약점 해결 방법을 제안하였다. 그러나 이전 연구의 새싹은 API에 관한 보안 약점을 해결하지 못하였다. 본 논문에서는 API에 의한 보안 약점을 해결하는 방법을 제안한다. 이 논문에서 제안하는 방법은 새싹에 위험한 메소드를 검사하는 정적 분석기를 적용하는 것이다. 위험한 메소드는 오염된 데이터 유입 메소드와 오염된 데이터 사용 메소드로 분류한다. 분석기는 위험한 메소드 탐색, 호출 그래프 구성, 호출 그래프를 바탕으로 유입 메소드와 사용 메소드간의 경로 탐색, 검출된 보안 약점 분석 순으로 4단계에 걸쳐 보안 약점을 분석한다. 이 방법의 효율성을 측정하기 위해 정적 분석기를 적용한 새로운 새싹을 이용하여 두 가지 실험을 실행하였다. 첫 번째 실험으로서 이전 연구의 새싹과 개선된 새싹을 Java 시큐어 코딩 가이드를 기준으로 비교하였다. 두 번째 실험으로써 개선된 새싹과 Java 취약점 분석 도구인 FindBugs와 비교하였다. 결과에 따르면, 개선된 새싹은 이전 버전의 새싹보다 15% 더 안전하고 개선된 새싹의 F-measure는 68%로써 FindBugs의 59%인 F-measure와 비교해 9% 포인트 증가하였다.

• 기술혁신학회지
• /
• 제21권4호
• /
• pp.1577-1605
• /
• 2018

본 연구는 중국에서의 기술사업화의 결과를 보는 연구로, 기술업 억만장자를 분석한다. 그러나 이 분야 연구가 전혀 없기 때문에 기술사업화론에서 관심을 갖는 초기 과정보다 기술업 억만장자에 대한 거시분석을 먼저 다룬다. 즉, 존재형태, 다른 업종 부자들과의 비교, 중국이라는 특수성, 세계적인 기술업 부자와의 비교 등을 다룬다. 이 연구에서 밝혀진 내용은 다음과 같다. 첫째, 중국의 100억 위안 이상 억만장자는 2004년부터 등장한다. 둘째, 초기에는 불법과 부패로 부자가 된 경우가 많았지만 점차 자신의 노력에 의한 부자가 많아지고 있다. 셋째, 부동산업과 제조업 부자들이 전반적으로 강세이지만 기술업, 의약업, 금융업 부자들의 증가 추세가 뚜렷하다. 넷째, 이들은 광둥성, 절강성과 북경시 및 상해시에 주로 집결되어 있다. 다섯째, 기술업 억만장자 수를 결정하는 요인은 GDP와 대미환율이었다. 여섯째, 기존 이론들과의 관계에서 본 연구는 억만장자 연구의 제5유형이라 부를 수 있고, 거꾸로 보는 기술사업화 접근의 한 유형이라 할 것이다. 마지막으로 중국에서의 부의 축적은 개념적으로는 기술기회와 시장기회 및 정책기회의 활용이라 판단된다.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.692-702
• /
• 2005

The purpose of this study was to explore global consumer behavior with fashion products, Korean fashion products, and Korean traditional fashion products (i.e., Han-Bok). Clothing selection criteria for fashion products and Korean fashion products were included as major constructs far the comparison among global consumers based on their nationality. Other consumer behavior variables were shopping place, buying frequency, purchase experience/plan, preferred brand, purchase items, information source, purchasing usage, and the product evaluation of Hanbok. A convenience sample of 236 global consumers was selected for this study. A questionnaire was pilot tested, and the revised questionnaire was used for the interview survey. Descriptive statistics and ANOVA were used for data analysis. Various nationality were existed such as Europe, North America, Japan, China, South East Asia. The results indicated that the most important criteria for fashion buying were design, fit, and size in order. Fit, size, and color item from buying criteria were significantly different among global consumers by nationality. Country of origin was found as less important factor among global consumers. Department store was most favorable shopping place, and once a month is the most mentioned category in buying frequency. Preferred brands were Levi's, Polo, Gucci, and Prada, etc. Secondly, regarding the evaluation of Korean fashion products, textile quality was highly evaluated. Significant difference except design/style category were existed among global consumers by nationality. Thirdly, regarding the evaluation of Hanbok, the product evaluation of Hanbok highly represented as special event clothing, unique image, beautiful details and oriental beauty in order. Significant difference in good quality of textiles, oriental beauty, coordination with good colors and fabrics, beautiful details and unique style and design were existed among global consumers by nationality. Managerial implications were discussed.

• 정보기술응용연구
• /
• 제2권1호
• /
• pp.83-111
• /
• 2000

본 연구는 정보화시대에 군이 변화하는 환경에 적응할 수 있도록 (1) 군사혁신의 구성요소와 정보기술이 국방영역에 미치는 영향을 분석하고, (2) 혁신 대상이 되는 전환과제를 도출하며, (3) 선진국의 군사혁신 사례 및 우리 군의 현 실태를 비교 분석하여 정보화환경과 부적합한 요소를 분석하고, (4) 도출된 혁신과제를 수행하기 위한 방안을 제시하는데 목적이 있다. 군사혁신의 구성요소를 현재 군사분야의 임무별/사업별 핵심영역이라고 할 수 있는 국방전략, 조직구조 및 환경, 교육훈련, 군사기술, 군수 및 병참 등 5개 과제에 한정하고, 이 5개 분야가 변화된 정보화 환경에 어떻게 영향을 받고 있으며, 부적합요소가 무엇이며, 어떻게 개선할 것인가 하는 혁신방안을 제시하였다. 군사혁신의 구성요소와 정보기술이 국방영역에 미치는 영향을 분석하기 위해 미군의 군사혁신 사례 및 경향을 분석하여 시사점을 도출하고, 그 기준에 의거 우리 국방의 현 실태를 진단한 뒤 추진방안을 제시하였다.

• Mycobiology
• /
• 제40권2호
• /
• pp.138-141
• /
• 2012

We measured physiological functionalities, including antihypertensive angiotensin I-converting enzyme inhibitory activity and immun-stimulating ${\beta}$-glucan content for sixty kinds of Makgeolli that is commercially available from the market. As a result, we selected R-12 commercial raw Makgeolli, with a high content of immuno-stimulating ${\beta}$-glucan, and R-14 commercial raw Makgeolli, exhibiting high antihypertensive activity. Due to the similarities in their overall physicochemical properties and raw materials used for fermentation, we compared the microbial flora in order to investigate the reason for the differences in their functionalities. Nested PCR and denaturing gradient gel electrophoresis for yeasts and bacteria were performed for analysis of microbial diversity of two different kinds of Makgeolli (i.e., R-12, R-14), which showed immuno-stimulating ${\beta}$-glucan content and exhibited a very high level of antihypertensive activity, respectively. Analysis of the 18S rDNA amplicon revealed a major presence of the yeast strain Pichia burtonii in every Makgeolli sample. Analysis of the 16S rDNA amplicon revealed a predominance of lactic acid bacteria, and the most frequent lactic acid bacteria were Lactobacillus ingluviei, L. fermentum, and L. harbinensis, and Lactobacillus sp. Among these, L. harbinensis was detected only in R-12 and L. ingluviei was found only in R-14. Different functionalities from the individual commercially available Makgeolli may be attributed to actions of different microbial flora during fermentation.

• 복식문화연구
• /
• 제20권4호
• /
• pp.463-474
• /
• 2012

The purpose of this research was to find the suitable dyeing method for dyeing cotton fabric into indigo blue color using the raw indigo powder dyes sold in the Korean market. The research focused primarily on the comparison of the non-reduced dyeing method and the reduced dyeing method. The dyeing effects using different dyeing temperatures ($2{\sim}80^{\circ}C$) and different concentrations of reducing agent and alkali were also investigated. It was found that the reduced dyeing method must be used for dyeing cotton into indigo blue color using the commercial raw indigo powder dyes. The best result was obtained by $20^{\circ}C$ dyeing with the $40^{\circ}C$ dyeing giving a comparable result. The intensity of the blue color could be enhanced by increasing the alkali concentration. The non-reduced dyeing could not dye cotton fabric into indigo blue color at any given dyeing temperatures ($2{\sim}80^{\circ}C$). The reduce-dyed cotton fabrics showed a gradual color change upon repeated washing and extended sunlight exposure, the most color change occurring after the first two washing cycles and the first 5 hours of sunlight exposure. The standard tests of colorfastness showed that the reduce-dyed cotton fabrics had good to excellent colorfastness whereas the colorfastness of the non-reduce-dyed cotton fabrics were mostly poor.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.1-11
• /
• 2012

According as the latest printing technology is converted from analogue to digital, life cycle of a printing technology is shortened and the existent printing companies were faced always in a new technology. Specially, way of foreign countries export opened because globalization of printing market is accelerated. But, printing buyers of advanced nation require standard printing process control. fect at product process step. Emphasized in IPA technical conference for past several years tendency about graphic art color proofing and technical analysis and comparison going through Color Proofing RoundUP. These researchers have developed a color management technology. A specially developed printing technology and reference characterization data brought certain high quality elevation in a graphic art proofing technology. When excessive GCR method application supervise printing, width of color conversion necks by requiring a lot of color conversions than proofing. But, these point is lacking relatively than a lot of effects that GCR gives. Therefore, correct interests of GCR algorithm and verification step to forecast beforehand result about actuality application are positively necessary. Therefore, this research forced into input file which is applied with different levels from input to print for printing optimization that consider standard printing with eco-friendly by method to solve these problem. And experimented using manuscript who GCR level is applied as is different in each field, and analyzed the result. Also, it is verification method by step to last printing from input file that solve been the various quality who generate in actuality field through these analysis result. ICC color management confirmed printing optimization process applying GCR algorithm improved to base.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.