• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.688-695
• /
• 2005

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The manipulability is a functionality of manipulator system in a given configuration under the limits of joint ability with respect to the task required to be performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method is presented. The dynamic equation of motion of underwater manipulator is derived based on the Lagrange-Euler equation considering with the hydrodynamic forces caused by added mass, buoyancy and hydraulic drag. The hydrodynamic drag term in the equation is established as analytical form using Denavit-Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based oil manipulability ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torques in joint space, while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid as much as gravity and velocity dependent forces in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.104.1-104
• /
• 2002

$\textbullet$ Proper definition of manipulability ellipsoid $\textbullet$ Volume and directional measures of manipulability $\textbullet$ Kinematic modeling as a serial connection $\textbullet$ Configuration dependent singularity $\textbullet$ Effect of nonholonomy on manipulability $\textbullet$ Effect of end-effector positioning on manipulability $\textbullet$ Effect of serial cooperation on manipulability

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.204-209
• /
• 2004

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The Manipulability is a functionality of manipulator system in a given configuration and under the limits of joint ability with respect to the tasks required to bt performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method are presented. The dynamic equation of motion of underwater manipulator is derived from the Lagrange - Euler equation considering with the hydraulic forces caused by added mass, buoyancy and hydraulic drag. The hydraulic drag term in the equation: is established as analytical form using Denavit - Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based on Manipulability Ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torque in joint space while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2713-2716
• /
• 2003

This paper presents a dynamic manipulability analysis method of the limb moving in viscous fluid. The key idea of the presented method is that the boundary of joint velocity can be converted to the velocity-dependant dynamic manipulability polytope through the coriolis, centrifugal and drag terms in dynamic equation. The velocity-dependant dynamic manipulability polytope is added to the inertial and restoring force manipulability polytope to get overall manipulability polytope of the limb moving in the fluid Each of the torque and velocity bounds arc considered in the infinite norm sense in joint space, and the drag force of a limb moving in fluid viscous is modeled as a quadratic form An analysis example with proposed analysis scheme is presented to validate the method.

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.446-453
• /
• 1999

An athlete motion during weightlifting is analyzed based on robotic manipulability, which shows dexterities by changing the position and orientation of the end-effector of robot manipulators arbitrary or along a specified direction. The athlete body is modeled as a highly redundant robot manipulator. The motion of weightlifting is analyzed based on the selected model with a power manipulability. Power manipulability and its geometric characteristics are derived by combining kinematic manipulability and dynamic manipulability. Also, manipulability-based optimal trajectory of weightlifter for given body structure of weightlifter derived through genetic algorithm.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.904-914
• /
• 2004

In this paper, input-output velocity and force transmission characteristics of the Casing Oscillator which is a construction machine with 4 degrees of freedom are examined. After the Jacobian matrix is decomposed into the linear part and angular part, the velocity and force transmission characteristics for the linear and angular workspace are easily analyzed and visualized even if the Casing Oscillator has the spatial dimensional workspace with 4 DOF. Regarding the manipulability measure of the Casing Oscillator, the kinematic isotropic index and the manipulability measure which represent the isotropy and volume of the manipulability ellipsoid, respectively, are combined to coincidently consider them with respect to equivalent ranges and fluctuations. A performance of the Casing Oscillator is evaluated by the newly proposed manipulability measures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1693-1696
• /
• 2003

In this paper, input-output velocity transmission characteristics of the Casing Oscillator, which is a constructional machine with 4 degree of freedom are examined. After the Jacobian matrix is decomposed into linear part and angular part, the linear and the angular velocity transmission characteristics are analyzed and visualized in easy way even in the case of 3 dimensional task space with 4 variables. Regarding the measure of dexterity of the Casing Oscillator, the kinematic isotropic index and the manipulability measures which are respectively represented the isotropy and the volume of the manipulability ellipsoid are combined. A performance of the Casing Oscillator is evaluated by the combined manipulability measure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.5-107
• /
• 2002

In this paper, a kinematic optimal design of a new paralleltype rolling mill based upon two Stewart platforms manipulator is investigated. The objective of this new parallel-type rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of the rolls, and tension of the strip. A manipulability measure, as the ratio of the manipulability ellipsoid volume and the condition number of a split Jacobian matrix, is defined. Two kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.48-53
• /
• 2004

In this paper, the task-oriented optimal configuration in the sense of Velocity and Force manipulability measure of manipulator mounted on ROV is considered. Manipulability is a quantitative measure of manipulator's capability obtained under the limits of joint velocities or torques. The base arrangements and optimal joint configuration of manipulator, that maximize the manipulability measure under the constraints of given task, are investigated. With the two types of base arrangements of manipulator, workspace analysis is carried out to investigate merits and demerits of each arrangement on the view of manipulability measure. To find optimal joint configuration for a given task with each arrangement, the SQP(Sequential Quadratic Programming) optimization are performed. Weighted linear combination of velocity and force manipulability measure is object function for SQP optimization. The kinematic parameters of Dual Orion manipulator which will be mounted on KORDI ROV are used for simulation.