• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.303-308
• /
• 2011

Tooth impaction refers to situations in which the eruption is inhibited by some physical barriers in eruptive path and the tooth remains unerupted beyond the normal time of eruption. The etiology of impacted tooth is controversial, but ankylosis has been suggested probably as a leading role. Impacted primary molars may cause several problems such as space loss, tipping of adjacent teeth, supra-eruption of the antagonists, dislocation of succeeding premolar, cystic change and infection. As one of conventional treatments of impacted primary molars, early tooth extraction or surgical extraction following space regaining when there is space loss has been suggested. However, when they are in normal formation and not ankylosed, orthodontic traction following surgical exposure can be the choice of treatment. In this case, a 3-year-old boy was referred to the department of pediatric dentistry for the unerupted mandibular right second primary molar. After surgical removal of gingiva on the occlusal surface, orthodontic traction was performed. After treatment, we could get normal alignment of primary teeth and the opportunity for normal development of permanent teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.125-145
• /
• 2001

To compare the stress distribution patterns between cement-retained and screw-retained implant supported fixed prostheses according to four different abutment types, a three dimensional finite element analysis was performed. The hypothetical three unit fixed partial denture case was modelled on the three implants(10mm length and 3.75 diameter) in mandibular bone. Four angles of implantation(vertical, 10, 15 and 20 degree inclined mesially) were created and three different directions of force (vertical, oblique, horizontal) were applied at the center of the second premolar and distal end of the first molar for each cases. Within the limits of this study, the results were as follows, 1. In vertically installed cases, the more stress was concentrated at upper components, but mesially inclined cases, the more stress was concentrated at cortical bone. 2, The more inclined mesially the more stress was observed, especially at cortical bone. 3. The cement-retained models showed lower principal stress and more even stress distribution than the screw-retained models. 4. The similar stress distribution pattern was showed in model 1 and model 2, model 3 and model 4. 5. The more stress was observed when the loads were applied at the distal end of 1st molar than the center of 2nd premolar. 6 The fixture and the model as a whole, lesser stress values were observed when vertical loads were applied as compared to horizontal and oblique loads.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.2
• /
• pp.79-85
• /
• 2003

The purpose of this study is to observe histopathologic changes in the bilateral craniomandibular joints after allowing 6 weeks of consolidation by varying the amount of distraction in rabbit mandible. Eight rabbits weighing about 2 to 3 kg were used. After corticotomy was performed on the left mandibular body between the first premolar and the second premolar region, a unilateral fixation device was placed. Then, a 7-day period was allowed without distraction of the device. The mandible was lengthened 0.5 mm/day. Corticotomy and lengthening of mandible were not performed in control group. After the completion of the lengthening process, a 6-week-consolidation period was allowed. Then, the rabbits were sacrificed, and histologic examination of the craniomandibular joints was performed. Proliferative changes were observed in the craniomandibular joints in all groups. With the increasing amount of distraction, hypertrophy of the cartilage layer became more severe, bone formed was dense and enchondral ossification was clearly shown in subchondral bone. Hypertrophy of the cartilage layer was also seen in the non-distracted side as the distracted side in the experimental group. These results indicate that when physical force is applied constantly to joints, the proliferation of articular cartilage and bone formation are present. When more than 6 weeks of consolidation period is allowed at the time of performing distraction for more than 5 mm, articular changes, especially, in the contralateral side should also be noted.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.7-15
• /
• 2003

This study used FEM(Finite Element method) based on micro-CT images to see the effects of occlusal force distribution with varying bone density and structure. the mandibular premolar region from human cadaver, thickness of 10mm was imaged using micro-CT. the cross sectional images were taken every $10{\mu}m$. these were reconstructed and the longitudinal image at the mid point of mesiodistal of the speciman was obtained for the specimen for the FEM. The stress disribution produced by a vertical force at 100N and 100N horizontal were analyzed by MSC Nastran FEM Package. according to the result of this study the occlusal force distribution depends on the structure of cancellus bone and for further information on the occlusal force distribution on the tooth and the surrounding structure requires further studies on cancellus bone structure. CEJ of all model show the highest peak and region whice meet teeth and bone show second high peak. Original model and cortical bone add model show different stress distribution. Stress distribution changed according to bone structures and densities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.270-274
• /
• 2009

Dentigerous cysts generally encompass the crown of an unerupted tooth. These cysts are usually solitary. They are the second most common odontogenic type of cysts following radicular cysts, and are frequently associated with impacted mandibular third molars or maxillary canines. Most multiple cysts found in the jaw are odontogenic keratocysts associated with the nevoid basal cell carcinoma syndrome, mucopolysaccharidoses and cleidocranial dysplasia. Although a single dentigerous cyst is well documented in the medical literature, including the prevalence, treatment and prognosis, multiple dentigerous cysts without any systemic symptoms is unusual. Furthermore, cases involving both the maxilla and mandible are especially rare. We present the case of an 11-year-old boy with nonsyndromic multiple dentigerous cysts associated with a mandibular second premolar and a maxillary canine. The treatment was conservative and included marsupialization and eruption guidance. Further follow up is planned to rule out additional problems and the possible identification of a syndrome.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.117-125
• /
• 2016

Purpose: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Materials and Methods: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Results: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. Conclusion: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

• The korean journal of orthodontics
• /
• v.51 no.1
• /
• pp.32-42
• /
• 2021

Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1-5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the "bowing effect" is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.37-42
• /
• 2010

Purpose: The mental foramen (MF) is an important anatomical structure during local anesthesia and surgical procedures in terms of achieving effective mental nerve blocks and avoiding injuries to the neurovascular bundles. Thus, understanding the anatomic features of the mandibular canal and accessory mental foramen in Korean could contribute to the surgical anatomic assessment. This study was to elucidate frequency, position and course of AMF (accessory mental foramen) in Korean using 3D cone beam computed tomography. Materials and Methods: The CBCT (Conbeam computed tomography) DICOM data (Alphard, Asahi, Japan) from 540 patients in korean were analyzed. We investigated images of 3D CBCT using Ondemand (CyberMed, Korea) software program on the incidence and anatomical characteristics of accessory foramen. Results: The accessory mental foramina were found in 17 patients. Accessory mental foramina exist predominantly in the apical area of the second premolar and posteroinferior area of the mental foramen. The accessory branches of the mandibular canal showed common characteristics in the course of gently sloping posterosuperior direction in the buccal surface area. The size of most AMF was obviously smaller than that of MF. Conclusion: We could identify frequency, position and course of AMF (accessory mental foramen) by the anatomical study of the accessory mental foramen using 3D cone beam CT in Korean.

• The Journal of Korean Academy of Prosthodontics
• /
• v.26 no.1
• /
• pp.153-169
• /
• 1988

There is a little scientific documentation reporting the stress, distribution to the edentulous mandible by different concepts of occlusal scheme. So, this study was to investigate the hypothesis that the magnitude and distribution of the occlusal stresses, transmitted through a mandibular complete denture base to the edentulous mandible, would be influenced by the lingualized occlusion. This investigation was performed to analyze the stresses induced in a three-dimensional photoelastic edentulous mandible, when a load is applied to the denture arranged into lingualized occlusion in centric relation, lateral and protrusive functional position. The mounted denture on a Dentatus Type ARO articulator was loaded in a pure vertical direction with 15kgs on the center of articulator in each case and the stresses were frozen into epoxy edentulous model at $127^{\circ}C$ in the stress freezing furnace. The stress-frozen epoxy models were sliced with diamond disc saw into 4mm thick. The slices were examined with a circular polariscope. The results were as follows: 1. In centric relation, the stresses were low at anteriors, and gradually increase to the premolar, molar area and highest at the first molar and gradually decrease from the second molar and lowest at the retromolar pad region. The lingual side showed higher stresses than labiobuccal side. 2. In lateral functional position, the working side showed higher stresses than the balancing side. In working side, the lingual side showed higher stresses than the buccal side and in balancing side, the buccal side showed higher stresses than the lingual side. 3. In protrusive position, stress distribution was symmetrical on the posteriors and the stresses were concentrated at the labial side of the anteriors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.182-186
• /
• 2007

A cyst is a pathologic lesion characterized by a cavity filled with fluid, celluar products, air, or a combination of these. Dentigerous cysts were formed around the crown of unerupted teeth. The reduced enamel epithelium persists around the crown after it has formed. Proliferation of the epithelium in a fluid-filled sac may be induced by osmotic pressure. In the first decade the most frequent location is the premolar site. In each subsequent decade the largest number of cysts are in the mandibular third molar site, with the second most frequent site being the maxillary canine. The treatment of odontogenic cyst can be mostly classified into three types of cyst enucleation, marsupialization and decompression. We should consider age of patient, anatomic structure, location and size for choosing a treatment method. Advantage of cyst enucleation is fast healing, but a injury of a surrounding structure is highly. Marsupialization is conservative treatment that can reduce the damage of a adjacent structure, but it is only limited at superficial lesion. Decompression also is conservative treatment, but it has the difficulty of the oral hygiene and the troublesome of the lavage. We present the possibility that reduces the defect of decompression and cures the lesion efficiently. We report a male patient with the dentigerous cyst developed at left mandibular third molar in this study. We used the decompression for a treatment and created special appliance to treat the lesion efficiently. We report a case of the cyst treatment that is association with efficiency of decompression appliance.