• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• Journal of Environmental Impact Assessment
• /
• v.26 no.1
• /
• pp.44-56
• /
• 2017

Sustainable development is important because the ultimate objective is efficient development combining the economic, social, and environmental aspects of urban conservation. Despite Korea's rapid urbanization and economic development, the distribution of resources is inefficient, and land-use is not an exception. Land use distribution is difficult, as it requires considering a variety of purposes, whose solutions lie in a multipurpose optimization process. In this study, Yangpyeong-eup, Yangpyeong, Gyeonggi-do, is selected, as the site has ecological balance, is well-preserved, and has the potential to support population increases. Further, we have used the genetic algorithm method, as it helps to evolve solutions for complex spatial problems such as planning and distribution of land use. This study applies change to the way of mutation. With four goals and restrictions of area, spatial objectives, minimizing land use conversion, ecological conservation, maximizing economic profit, restricting area to a specific land use, and setting a fixed area, we developed an optimal planning map. No urban areas at the site needed preservation and the high urban area growth rate coincided with the optimization of purpose and maximization of economic profit. When the minimum point of the fitness score is the convergence point, we found optimization occurred approximately at 1500 generations. The results of this study can support planning at Yangpyeong-eup.ausative relationship between the perception of improving odor regulation and odor acceptance.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.1
• /
• pp.54-62
• /
• 2018

In the 2000's, due to a change in hospital management strategy, the organizational structure shifted from a hierarchical system to a team system. While the hierarchical system is characterized by being activity centered, job title linked, and vertically managed, the team system is characterized by being competency centered, job title segregated, and horizontally managed. The job titles of medical technologist manager was surveyed three times in 1997, 2007, and 2017. It has been confirmed through staff members working at 24 hospitals in more than 500 beds in the metropolitan area. The results of job titles follow are as follow: "Team Leader; Part Leader" 14/24 (59%), "Chief Technologist; Area Head Technologist" 7/24 (29%), and "Chief" 3/24 (12%). The present authors propose an alternative name based on the team system to refine the three job titles currently used by medical technologists. First, the Chief Technologist is unclear if it refers to the Technologist General Manager or Technologist Manager. The Chief Technologist should be changed to "Team Leader". Second, given that Area Head Technologist or Section Chief are on the same position as Head Nurse, we suggest that Area Head Technologist or Section Chief should be changed to "Part Leader". Third, while the organization regulation is marked merely as Department of Laboratory Medicine according to the hierarchical system, it is marked as Laboratory Medicine Team according to the team system. Medical technologists come to have more belongingness, feeling of solidarity, and intimacy under the team system.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.65-70
• /
• 2006

The regulation of HNS has been intensified by the international trends including OPRC-HNS Protocol and '96 Convention which was driven by the high amounts of cargo. Due to the characteristics of HNS that would possibly bring potential damage with personnel and assets, effective management and prompt actions are required definitely. In order to respond effectively against HNS accidents, Korea Coast Guard (KCG) is in the process q development of HNS accident response manual and information system which allows On-Scene Coordinator(OSC) and personnels for rescue including an information for hazardous materials, sensitive area to be affected, solution methods and more. Furthermore, KCG is also building up establishment of national and local contingency plans for HNS in accordance with OPRC-HNS Protocol. It is also advised to proceed for the government to solve the anticipated obstacles that include protection equipments to get close to the site, experts allowing to manage accidents and organizations specialized for overall HNS related matters. The proposed issues described above are planned to conducted on basis of government.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.4
• /
• pp.180-185
• /
• 2017

For the management of mercury-containing products, the products were selected to do material flow analysis in preference of not having selected in previous studies. Domestically mercury have been added to pigment for prevention of bacterial growth. So, in this study paint containing pigment was selected as a target. 71 samples of paint products collected in 2014 and data of 38 samples of wastes (dust, sludge, paint) analyzed in 2010 were used in material flow analysis. The result shows that mercury was 0~0.25 mg/kg in products and 0.23~0.69 mg/kg in the wastes. In the material flow analysis, the amount of flow in the process of distribution was 10.06 kg/year, but the amount of flow in disposal like a landfill, incineration and recycling was much than distribution as 25.27 kg/year. It was caused by different sampling period between collecting products and data of wastes. Therefore, It could be possible to be affected from regulation by RoHS like decreasing usage of mercury in paint products or eradicated in the industry. Mercury contents in current paint products are very low to affect discharging to the environment.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.761-782
• /
• 2006

Public concern about potential environmental risks of agricultural business for the livestock production and processing is increasing. However, due to differences in general industry structural characteristics, such as farm production and waste management practices, the effect of environmental policies may differ from species to species as well as across size categories. I hypothesize that additionally the Hog subsector may be more responsive to (or a greater driver of) a changing environmental policy environment than the beef cattle subsector. As a result, I expect to see more evidence of sensitivity in the environmental policy milieu from hog-operation stocking and location decisions than with the beef cattle industry. The written stringency may not effective, instead state's willingness to enforce has directed and regulated. However, in presence of rapid structural change, just like hog, industry location is affected by state regulation. The environmental compliance cost may be a small portion of industry total cost and fixed cost of beef industry makes for them to take into account environmental compliance for their decision location making. The special movements of flog industry have chance to minimize the cost of the operation and they willing to locate less stringent place.

• Journal of Animal Science and Technology
• /
• v.57 no.3
• /
• pp.8.1-8.8
• /
• 2015

Background: The demand for healthy, lean and consistent meat products containing low saturated fatty acid content and high quality polyunsaturated fatty acids (PUFA), especially long-chain (${\geq}C_{20}$) omega-3 PUFA, has increased in recent times. Fat deposition is altered by both the genetic background and dietary supplements, and this study aimed to assess the effect of dietary Spirulina supplementation levels on the mRNA expression patterns of genes controlling lipid metabolism in the subcutaneous adipose tissue (SAT) and Longissimus dorsi (ld) muscle of Australian crossbred sheep. Methods: Twenty-four weaned lambs belonging to four breeds under the same management conditions were maintained on ryegrass pasture and fed three levels of Spirulina supplement (control, low and high). In terms of nutrient composition, Spirulina is a nutrient-rich supplement that contains all essential amino acids, vitamins and minerals. It also is a rich source of carotenoids and fatty acids, especially gamma-linolenic acid (GLA) that infer health benefits. After slaughter, subcutaneous adipose tissue (SAT) and ld samples were subjected to mRNA extraction and reverse transcription using quantitative polymerase chain reaction (RT-qPCR) to assess the mRNA expression levels of the Aralkylamine N-acetyltransferase (AANAT), Adrenergic beta-3 receptor (ADRB3), B-cell translocation gene 2 (BTG2) and Fatty acid synthase (FASN) genes, which are associated with lipid metabolism. Results: Both low and high Spirulina supplementation levels strongly up-regulated the transcription of all the selected genes in both SAT and ld tissues (mostly in the subcutaneous adipose), but sheep breed and sex did not influence the gene expression patterns in these tissues. Conclusions: The evidence indicates that high Spirulina supplementation level resulted in a decrease in intramuscular fat content in Australian purebred and crossbred sheep due to the enhanced production of melatonin in sheep muscle tissues and strong up-regulation of mRNA expression of BTG2 in SAT which negatively affected fat deposition. In contrast, low Spirulina supplementation level strongly up-regulated the ADRB3 and FASN genes responsible for fat production. These findings are consistent with the observed phenotypic data suggesting that low Spirulina supplementation level can increase lamb production, with higher long-chain PUFA content.

• Environmental and Resource Economics Review
• /
• v.26 no.1
• /
• pp.103-121
• /
• 2017

The domestic ESCO project was introduced in 1992 as one of the energy efficiency improvement programs. In recent energy market, the changes in the market conditions such as smart grid, renewable energy, and the importance of demand response became important issues. As the diversified business models are required, examples of overseas exercises are examined. Business areas in Europe or the US where the ESCO industry has been active include measures to improve the efficiency of energy facilities in all areas, ranging from energy supply facilities and energy services to end users. This type of ESCO overseas business model can be classified into various types such as project execution method, supplier demand management, financing method, climate change and emission rights, new and renewable energy, and other criteria. In this study, we propose to adopt IEC (Integrated Energy Contracting) contract method in domestic ESCO market for additional business models. Current convention of listing the specific individual business types being allowed by regulation turned out to be obstacles to the revitalization of the related market. In order to achieve the goal of energy conservation, it is recommended, instead, to revise the current funding guidelines to be a negative system.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1153-1163
• /
• 2019

In women, obesity rises with menopause. By comparing the dose-dopendent effects of genistein on regulation of body weight and lipid levels with swimming exercise in female ovariectomized (OVX) mice, an animal model of postmenopausal women, the effective dose of genistein on obesity control was investigated. Ovariectomized female mice were divided into control group, swimming exercise group and genistein concentration (0.005%, 0.05%, 0.1% wt/wt) treatment group and all mice fed high-fat diet for 8 weeks. The three different genistein doses as well as swimming decreased body weight, white adipose tissue mass, plasma lipid levels and lipid accumulation in liver, compared with control OVX mice. These decrease effectiveness of genistein showed dose-dependent manner, and is most effective at 0.1% genistein concentration, and paralleled effects of swimming on body weight, white adipose tissue, plasma lipid levels and lipid accumulation in liver. This present findings indicate that optimal dose of genistein in feamle OVX mice have a similar effect to swimming exercise on improvement of obesity. Intake of dietary genistein supplements will help obesity prevention in postmenopausal women.

• Journal of Nutrition and Health
• /
• v.45 no.2
• /
• pp.150-158
• /
• 2012

This study was conducted to investigate the relationship between knowledge of nutrition labeling and the effect on eating habits with 300 high school boys in Seoul. The subjects were divided into an underweight (UW) group (BMI < $18.5kg/m^2$, n = 42), a normal weight (NW) group ($18.5kg/m^2\;{\leq}\;BMI\;<\;23kg/m^2$, n = 129) and an overweight (OW) group (BMI ${\geq}\;23kg/m^2$, n = 79) based on their body mass index (BMI). The average age of participants was 17.8 years old and their mean height and weight were 174.9 cm and 66.5 kg. The mean BMI of subjects was $21.7kg/m^2$ which fell within the normal range. Seventy six point four percent of subjects perceived nutrition labeling and they acquired the information pertaining to it through TV and internet. The UW group and the OW group obtained it from their parents, relatives and friends, while NW group acquired it from school. There were significant differences among groups in the acquired source of the information on nutrition labeling (p < 0.05). The NW group and the OW group trusted nutrition labeling more than the UW group, but there were no significant differences among them. Forty five point five percent of the UW group and 40.7% the NW group were satisfied with nutrition labeling education, while only 15.8% of the OW group did it. The OW group checked nutrition labeling more than the UW group and the NW group at the point of food purchase. The primary reason for examining nutrition labeling was 'to check nutrient contents' in the UW group and the NW group, while the OW group examined it to improve health including regulation of body weight. There were significant differences among groups with regards to the reason for examining nutrition labeling (p < 0.001). The OW group was aware that nutrition labeling affected their eating ha-bits significantly more than the other groups (p < 0.05). Therefore, application-centered education on nutrition labeling and the strong support of the government is needed in order to improve nutrition labeling use and to apply the information from nutrition labeling into student dietary life.