• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.93-103
• /
• 2002

The reinforcement concrete work is the work affected by structural safety, durability, and schedule with form work. The domestic reinforcement concrete works have mainly worked the process of re-barfabrication/assembly on site. Finally it have low productivity. Then this paper analyzed waste factors and the process of re-bar fabrication/assembly on site for the productivity improvement and value-added productivity improvement. Waste factor analysis aims at maximizing value-added by the value analysis of re-bar fabrication and assembly on site. Finally, Value-AddingActivity(VAA)ismuchlessthan non-value adding activity. Especially, Non-Value-Adding Activity(NVAA) generates waste such as the activity steps, labors, equipments, materials, time, and soon. And it was non-flow production, over production, and analyzed into having to shift value. This paper aimsat maximizing value-addingactivity and minimizingnon value-addingactivity through waste factor analysis in process for the improvement of value added productivity.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.32-42
• /
• 2013

The Korean Government introduced a cultural heritage supervision system in January 2010 to control quality and to prevent poor construction. However, cultural heritage related constructions that require supervision, a scope of supervision, supervision cost and placement of supervisors have not been standardized yet. For this reason, standards of supervision for repair works of cultural heritage that reflect the characteristics of small-scale repair works and restoration of cultural heritage are required. Accordingly, this study has suggested standards of supervision works and cost by analyzing the average construction period that is suitable for the characteristics of cultural heritage repair works. In other words, this study has suggested standards of full-time supervision costs by applying the fixed amount-added method (adding direct labor cost, direct expenses, overhead expenses, engineering fee, charges for additional works and VAT) which is the same as the method of calculating supervision costs for public construction projects because a supervisor has to work full time at a construction site to perform supervision if the project is a mid/large-scale cultural heritage repair work. Also, this study has suggested standards of part-time supervision costs for a small-scale cultural heritage repair work and the ways of supervising the construction projects by visiting the project site on important occasions. According to the result of the analysis by applying the forgoing standards of supervision costs for cultural heritage, a full-time supervision cost for cultural heritage repair works is approximately 98% compared to the construction supervision of a public construction project, and a part-time supervision is approximately 158% compared to architectural construction supervision. It is expected that the valuable cultural heritage of Korea will be preserved by controlling quality of cultural heritage repair works through the application of this study result - the standards of supervision costs for cultural heritage repair works - to an actual project.

• Korean Journal of Environment and Ecology
• /
• v.18 no.4
• /
• pp.446-455
• /
• 2004

This study has been conducted as a basic research for developing efficient ways of managing Korean National Parks by finding differences via the comparison of present management systems of national parks in Korea and Japan. The survey was conducted through telephone interviews and direct interviews with staffs of related organizations as well as related literature study. In result, it is found that Japanese national parks have a numerical standard of minimum area, with less staff than Korea, and larger designated areas are being managed. Management organizations of both countries are divided as main and commission. In Korea, 6 staff in Natural Resources Division under Ministry of Environment are managing main organization, and in Japan, 53 staff of 3 divisions(National Park Division, Natural Environment Management Division, General Affairs Division) are taking charge of it. Moreover, General Affairs Division, dividing whole country into 11 blocks, manages 11 units of natural preservation offices, 12 branch offices, and 67 units of nature preservation management offices. In case of commission, Foundation of Natural Park Beautification & Management in Japan has a headquarter and 20 branch offices with 54 staff who are only doing site management, while in Korea, the National Parks Management Corporation has a headquarter and 25 offices with 748 staff carrying out main office jobs and site management side by side. From the differences in both countries, we could suggest efficient measures for our national park management as follows: \circled1 introduction of numerical value as criteria for national park designation, \circled2 review of use zone, \circled3 division of the national park management office into site office and regional office, with dividing works and re-posting staff, \circled4 enlargement of park management division in Department of Environment, \circled5 National Park authority becomes a national public servant

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2015

The modular construction method has been getting more attention followed by global eco-friendly trend as the domestic construction industry has focused more on remodeling and extension work. The modular construction method is an industrialized construction system which is not likely as the existing construction method it manufactures more than 70% modules at the factory then assembling can be completed in a short amount of time on site. The modular construction method has various strengths; shortening of construction period by on-site work decrease, weight pressure reduction by usage of light steel frames and cost saving by repetitive manufacturing. However, it is currently not expanded due to the existing commercialized construction method. Therefore, this research is in order to help the related authorities make decisions to select the construction method and motivate expansion of modular construction method which can be utilized effectively in the extension works. The intention of this research is to stress differentiation from other construction methods in construction period, construction expenses, labor and forces by comparing and analyzing actual cases, to inform competitiveness of modular construction method by concrete effect analysis and to support adoption of the modular construction method into the domestic industry.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.110-120
• /
• 1994

The Quantitative analysis for collapsion probability of each construcion work has not been developed, despite of that the one for safety management itself has been reported, up to now. It is concluded that showing critical check points against structure collapsion due to each work at construction site, and Quantifying those could be useful Quality-assuring tool, not to prevent Quality failure. Risk classes of each work at construction site, classified by German Builders Mutual-Aid Association (GEBMAS), and by special instruction rates of Korea Insurance Development Institute, are introduced to compare with the results of this study. As of a study method, total 2,002 sheets of questionwares are distributed directly to new city development areas, which are called, Ilsan 110 points : Pundang 79points and Chungdong 38points, including additional Changwon 125sheets and pusan 60sheets, by four(4) people, for contact with actual site engineers. Total responses of 1,056 sheets, are collected. Interrelationship diagram between experience years of Engrs., and risk rate of responses are also classified, with the criteria of four(4) years. Domestic journals with relation to construction have reported that main building Structure collapsions are mainly shown on apartment buildings and office ones. These two(2) building structures are again classified as five(5) kinds of works. This study takes use of an approach on haying the risk rates for each construction work on the above individual construction work. Additionally, site investigations have been performed to find out any possible unreasonable check items, due to construction method ; Reinforced Concret structure, Pre cast Concrete structure, and Steel structure building. Developed Quality Assurance Analysis Form with the Quantitative danger class, resulted from this study, are verified as it is able to be a good efficiency tool against collapsion of building structures.

• Journal of Engineering Education Research
• /
• v.13 no.2
• /
• pp.12-15
• /
• 2010

Learning community is one of the important pillars of the education in knowledge-based society. How to encourage students' spontaneous participation to the learning community is one of the actual problems to solve for the revolution of the education scheme. In this paper we introduce a strategy to boost the activity of the learning community, which works in the on-line space. The keys for the on-line supporting system for the learning community are to have communication space, trading space and connection with industry. To support activities of each space, we provide an on-line web site which includes a community module, a knowledge market module and an industrial commentary module. Students can start their self-leading study in the communication space, and they can also practice skills for the knowledge management in the knowledge trading space. Through the connection space, they can learn more from the real world critics with help of industry.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.399-402
• /
• 2007

National Geotechnical Information Database Project based on GIS has begun as public works and continued until now, the whole of country has been target on since the 2003. Today, the 60,581 number of geotechnical data(counted by bering number) have been constructed as GIS-DB and they are being serviced at the National Geotechnical Information Integration Management System(NGIIMS)(http://www.geoinfo.or.kr). In this study, we considered operation status of NGIIMS, GIS-DB distribution of Geotechnical Information and utilization in order to investgate applicability of National Geotechnical Information Database. The results appeared that Geotechnical Information DB was along road-center, and in the case of complex, was only to some area. But after the 2007 when the law of computerization responsibility would be institutionalized, the more geotechnical data will be constructed and be able to use at a construction site.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.25-26
• /
• 2021

System scaffolding and shoring are temporary structures in which vertical members, horizontal members, bracing members and trusses are assembled and installed. In order to ensure quality and safety, the quality test shall be carried out in accordance with the Guidelines for Quality Management of Construction Works (MOLIT Notice No. 2020-750). The quality test method (national standard) for Components for tied post system scaffolding and shoring is based on the Korean standards (KS F 8021) and the Safety certification standards (MOEL Notice No. 2021-22). However, the two standards differ in some aspects such as performance standards and etc, so cause confusion when applying them on-site. In addition, the standard for truss are applied only to trusses for shoring and cannot be applied to trusses for scaffolding. Therefore, this study aims to unify the two national standards and establish realistic standards.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.119-128
• /
• 2014

The environmental survey in advance in the construction works is very important for planning and designing as well as the service of field survey before carrying out construction. The topographical application of spatial information coupled with USN is the very economical method for the survey and research every processing stage of construction field in advance. Therefore the execution of very important role for environmental planning and fundamental designing of construction reduces the unnecessary trial and error through the environmental survey in advance. In this research the environment of existent construction field is transformed to that of digital spatial information by fusing the sensor network with wireless technique on the base of spatial position. In addition, the sink sensor cumulates the environmental data measured from each USN sensor using small wireless environmental sensors installed at the construction site and changes of various environmental data at the present constructing site are able to be monitored at 3-D topographical space in real time by using the method for transmitting the image of PC output based on TinyOS.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.3
• /
• pp.61-69
• /
• 2001

This paper presents a case of community participatory neighborhood park design. The site, Yangji park, is located in Sandang-dong, Dongjak-gu, Seoul and the area is about 1,870m. Neighborhood park is defined as an outdoor space which is close to people´s home and is considered to be their own, because of the residents´ collective responsibility, family association, and frequent shared use. It is a place for pleasant rest area for community, sharing a sense of nature and retaining a sense of tradition and culture which is disappearing in a city. It is related to the daily life of the people near the site and becomes a place to let the community increase dialogue and understanding between people. On the other hand, participatory design is a design in which people participate in the design process. Thus people can understand the project well, present their opinions better, and reconcile conflicts between the different interests of people. This design applied a community participatory design method to design a neighborhood park. The major strategies for participatory design were ´workshop´, ´card game´, ´walking site´, ´interview´, and ´questionnaire´. Eight workshops were performed for the participation design. The major spaces and facilities elected by participants were the ´main entrance plaza´, ´entrance symbol space´, ´children´s ´playground´, ´multipurpose sport ground´, ´grass land´, ´foot-pressure area´, ´spaces symbolizing a rock mountain and an old well´, ´space for youth´, ´a pavilion´, etc. From this selection, design concept alternatives were generated by participants. The aster plan was developed from these design alternatives with the help of landscape architects. It was revised by ist visits and community discussions. People were also involved in the construction process and left their own works, such as hand prints, on the site. After construction, residents continued to maintain the park by themselves. As a result, It was found that participatory design was very effective for people´s satisfaction and sustainable park management. By involving people more in the process they developed a sense of community, a sense of ownership, and attachment to the place. In conclusion, it is suggested that we need to develop an effective people´s participation method to Korean society.