• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.440-442
• /
• 1997

The properties of magnetic suppositories used in medicine has been tested with M ssbauer spectroscopy methods. The experiments were carried out on magnetic rectal suppositories containing parmadine and fine-dispersed ferrite powder BaO.nFe$_2$O$_3$as a magnetic filler. According to the data on the value of effective magnetic field on $^{57}$ Fe nuclei in ferrite magnetic sublattices, the stoichiometric n-number equals approximately 5.5; this vague corresponds to the composition range of optimal magnetic properties.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.39-47
• /
• 1996

The magnetic fibrous polymeric oil filter elements for industrial lub-systems were obtained by pneumoextrusion processing prepared from thermoplastic pqlymer (polyamide) containing a magnetic particulate filler (Ba ferrite), and treated subsequently in a magnetic fields. Using the standard laboratory oil filtration test rig, metallic particle quantifier and image analyser system, the dependence of filtration charateristics of the magnetic filter media on the parameters of porosity and magnetic properties was investigated. The pressure drops and efficiencies of lubricating filter elements were measured on the packing density and magnetised filler content of filter element. Also, the industrial lub-systems such as lubricant filters for gear test rig and electric discharge processing machine were used for testing the flitrational characteristics of tl, c magnetised filter elements. The magnetic fibrous polymeric filter material was shown to possess a highly filtration efficiency in filtering the fine ferrous particles with increasing the magnetic force of filter element. Therefore, it is expected that the magnetic fibrous polymeric filter material should be used for effective oil filrers on the industrial lub-systems.

• 한국의학물리학회지:의학물리
• /
• 제9권2호
• /
• pp.73-75
• /
• 1998

Mossbauer spectroscopy methods are discussed when applied to test the properties of magnetic suppositories used in medicine. The experiments were carried out on magnetic rectal suppositories containing parmadine and fine-dispersed ferrite powder (BaOㆍnFe$_2$O$_3$) as a magnetic filler. According to the data on the value of effective magnetic field on $^{57}$ Fe nuclei in ferrite magnetic sublattices, the stoichiometric n-number equals approximately 5.5; this value corresponds to the composition range of optimal magnetic properties.

• 한국자기학회지
• /
• 제22권6호
• /
• pp.216-220
• /
• 2012

이 연구에서는 근역장 통신(NFC)용 소재로 응용하기 위해, MnZn 페라이트와 FeSi 합금 분말을 filler로 사용하여 제조한 0-3형 자성복합소재의 복소투자율 변화(1 MHz~1 GHz)를 측정하였으며, RFID 주파수(13.56 MHz)에서의 복소투자율 값을 검토한 결과, filler 함량에 따라 투자율 실수항은 증가하고 허수항은 감소하는 결과를 얻었다. 즉, 시트형 자성복합소재의 응용을 위한 연구 결과로서, 고투자율을 나타내면서 손실항인 허수항을 상대적으로 낮출 수 있는 소재 제조공정 기술을 확보할 수 있었으며, 복소투자율 변화는 자성분말 filler의 성분과 입자 형태, 그리고 polymer 종류에 의존함을 알 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.136-143
• /
• 1995

With the contact angle of phase dropping epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interfacial wettability between epoxy resin and glass plate as a simple model of glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature in the oven. From the view point of plasma treatment condition in this work, when discharge conditions were pressure 200mtorr, voltage 800V, magnetic flux density 8OGauss, optimum treatment time were proved as 3,4 and 5 minutes for the environment of >$80^{\circ}C$, >$100^{\circ}C$ and >$120^{\circ}C$, respectively.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.48-53
• /
• 2008

Although Magnetic Pulse Welding(MPW) is not a recently developed technique, it has gained the attention of the automotive industry. MPW has become an accepted welding process because it enables the joining of similar, and dissimilar materials, with a very short cycle time, without the need for filler metal and gases. In this study, the effect of the stand-off distance on the weld strength has been investigated. The compressive strength of the MPW joints was evaluated using UTM. The interface of weld, IMC composition and morpology were studied by SEM and EDS. It was concluded that the stand-off distance and the voltage are the main parameters influencing the strength of weld. In case of too high stand-off distance, it influenced harmful effect because of the resistance of deformation.

• Composites Research
• /
• 제28권5호
• /
• pp.270-276
• /
• 2015

Polyvinylidene fluoride (PVDF)-based nanocomposites are fabricated by incorporation of boron nitride (BN) nanosheets with anisotropic orientation for a potential high thermal conducting ferroelectric materials. The PVDF is dissolved in dimethylformamide (DMF) and homogeneously mixed with exfoliated BN nanosheets, which is then cast into a polyimide film under application of high magnetic fields (0.45~10 T), where the direction of the filler alignment was controlled. The BN nanosheets are exfoliated by a mixed way of solvothermal method and ultrasonication prior to incorporation into the PVDF-based polymer suspension. X-ray diffraction, scanning electron microscope and thermal diffusivity are measured for the characterization of the polymer nanocomposites. Analysis shows that BN nanosheets are exfoliated into the fewer layers, whose basal planes are oriented either perpendicular or parallel to the composite surfaces without necessitating the surface modification induced by high magnetic fields. Moreover, the nanocomposites show a dramatic thermal diffusivity enhancement of 1056% by BN nanosheets with perpendicular orientation in comparison with the pristine PVDF at 10 vol % of BN, which relies on the degree of filler orientation. The mechanism for the magnetic field-induced orientation of BN and enhancement of thermal property of PVDF-based composites by the BN assembly are elucidated.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.125-128
• /
• 2013

Magnetic and dielectric properties of rubber composites are controlled by using two kinds of high-permeability metal particles with different electrical conductivity (Sendust, Permalloy), and their effect on microwave absorbance has been investigated, focusing on the quasi-microwave frequency band (0.8-2 GHz). Noise absorbing sheets are composite materials of magnetic flake particles of high aspect ratio dispersed in polymer matrix with various filler amount of 80-90 wt.%. The frequency dispersion and magnitude of complex permeability is almost the same for Sendust and Permalloy composite specimens. However, the complex permittivity of the Permalloy composite (${{\varepsilon}_r}^{\prime}{\simeq}250$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}50$) is much greater than that of Sendust composite (${{\varepsilon}_r}^{\prime}{\simeq}70$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}0$). Due to the large dielectric permittivity of Permalloy composite, the absorbing band is shifted to lower frequency region. However, the investigation of impedance matching reveals that the magnetic permeability is still small to satisfy the zero-reflected condition at the quasi-microwave frequency band, resulting in a small microwave absorbance lower than 10 dB.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1217-1223
• /
• 2007

5.8 GHz의 DSRC(Dedicated Short Range Communication) 시스템을 사용하는 ITS(Intelligent Transport System)에 전자파 환경 문제가 발생하면서 광각 경사 입사 대책용 전파 흡수체의 사용이 요구된다. 5.8 GHz 주파수에서 경사 입사된 전파에 대해 낮은 반사 손실을 보이는 2층형의 전파 흡수체(유전 복합 재료/자성 복합 재료)를 설계하였다. 흡수층에는 iron flake를 filler로 사용하였다. 임피던스 정합 기능의 표면층에는 유전상수가 낮은 carbon black을 사용하였다. 각 층의 sheet는 일반적인 세라믹 혼합물 제조 공정에 의해 제작되었고, 지지재로는 가황고무를 사용하였다. 전송 선로 이론에 근거하여 TE(Transverse Electric)와 TM(Transverse Magnetic) 편파에 대해 입사각을 변화시키며 반사 손실을 계산하였고, 자유공간법에 의해 반사 전력을 실측하였다. 입사각 $55^{\circ}$까지 낮은 반사 손실(-10 dB 이하)을 갖는 2층형 흡수체가 설계되었다. 자유공간법에 의한 반사 전력의 실측치가 이론적 계산치와 비슷한 값을 보여 설계 방법의 타당성을 입증할 수 있었다.

• Journal of Oral Medicine and Pain
• /
• 제47권3호
• /
• pp.148-151
• /
• 2022

Obstructive sialadenitis, one of the diseases that most frequently causes swelling and pain in the salivary glands, is mainly caused by structural obstructions. Sialolithiasis is the most frequent cause of the disease, and other causes include calculus formation, duct strictures, foreign bodies, and anatomical variations. Although there is a possibility that facial fillers directly block the salivary ducts, no cases of obstructive sialadenitis associated with them have been reported yet. We report the case of a 34-year-old female patient who complained of recurrent swelling and pain in the left buccal mucosa. She had undergone facial filler injection procedures on her facial area for cosmetic purposes several years before. Based on the findings of magnetic resonance imaging (MRI) and MR sialography, she was diagnosed with obstructive sialadenitis due to facial fillers. Through this case, we should remember to obtain a thorough history including filler treatments in the case of parotid gland swelling. We also suggest proper utilization of advanced imaging such as MRI in evaluating the location of facial fillers.