• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.98-99
• /
• 2019

본 논문에서는 PMSM(Permanent Magnet Synchronous Motor)의 구동 효율을 향상시키기 위한 최대 효율 제어 기법에 대해 제안한다. 제안된 기법은 전동기의 입력 전력이 최소가 되도록 Gradient Decent 알고리즘을 기반으로 하는 최적화 기법인 Adaptive 알고리즘을 통해 전류각을 조정한다. 제안된 기법을 통해 동손을 최소로 제어하는 기존 MTPA(Maximum Torque Per Ampere) 제어 방식 보다 구동 효율을 향상시킬 수 있으며 전동기의 제정수 오차에 강인하다. 1.7kW IPMSM의 모의실험을 통해 제안된 기법의 효용성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.156-157
• /
• 2017

본 논문은 전차원 자속 관측기를 이용한 대용량 매입형 영구자석 동기전동기(IPMSM)의 센서리스 제어 기법을 제안한다. 기존의 전차원 자속 관측기를 사용한 제어 방식은 IPMSM의 자속 모델을 표면 부착형 영구자석 동기전동기(SPMSM)의 자속 모델처럼 해석하기 때문에 추정되는 회전각의 오차가 발생한다. 특히 릴럭턴스 토크가 큰 대용량 IPMSM 구동 시에는 회전각 오차가 크게 나타나므로 단위 전류당 발생하는 최대토크를 감소시켜 정밀한 MTPA 제어가 불가능하다. 제안하는 알고리즘은 전차원 자속 관측기를 통해 추정된 회전각의 오차를 보상하여 대용량 IPMSM의 정밀한 센서리스 제어를 가능하게 한다. 제안하는 기법의 타당성은 시뮬레이션을 통해 확인하였으며, 기존의 알고리즘과 비교하였다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.219-220
• /
• 2015

비대칭 배리어 방법으로 설계된 견인용 매입형 영구자석동기전동기(IPMSM)에 대한 최대토크 제어기법을 Simplorer기반 시뮬레이션해석에 의해 고찰한다. 그리고 레졸버와 R/D 컨버터를 이용하여 회전자의 절대위치를 검출하고, 이를 위한 절대 위치 검출회로 및 제어보드를 제작하여 이에 대한 유효성을 실험을 통해 성능을 확인한다.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.268-275
• /
• 2013

This paper shows the characteristics of performance for interior permanent magnet machine (IPM) considering driving conditions such as maximum torque per ampere (MTPA) and flux-weakening control especially in terms of harmonic loss. In particular, based on finite element analysis (FEA), permanent magnet (PM) eddycurrent loss and the harmonic iron loss have been computed where the models have been intentionally designed to identify the effects of pole-slot combinations on the loss while maintaining the required power for electric vehicle. From the analysis results, it was shown that the rotor iron loss and PM eddy-current loss of machine employing fractional slot winding are extremely large at load condition. Furthermore, it was revealed that the harmonic iron loss at high-speed operation is mainly distributed over stator teeth and rotor surface, which may aggravate cooling system of the rotor structure in the vehicle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.33-39
• /
• 2005

The maximum output torque and power developed by the machine is ultimately depended on the allowable inverter current rating and maximum voltage which the inverter can supply to the machine. Therefore, considering the limited voltage and current capacities, it is desirable to consider a control method which yields the best possible torque per ampere. In this paper, we propose fuzzy neural network(FNN) controller that combines a fuzzy control and the neural network for high performance control of induction motor drive. This controller composes antecedence of the fuzzy rules and consequence by a clustering method and a multi-layer neural networks. This controller is compounding of advantages that robust control of a fuzzy control and high-adaptive control of the neural networks. Also, this paper is proposed control of maximum torque per ampere(MTPA) of induction moor. This strategy is reposed which is simple in structure and has the honest goal of minimizing the stator current magnitude for given load torque. The performance of the proposed induction motor drive with maximum torque control using FNN controller is verified by analysis results at dynamic operation conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.420-429
• /
• 2008

This paper describes design procedure and control strategy of HDC(High side DC/DC Converter) and MCU(Motor Control Unit) for diesel hybrid electric vehicle. In designing HDC and MCU for HEV high power density and reliability is strongly needed to meet the demand of automotive industry. In order to achieve the high performance of a controller, MPC5554 based control board is developed. An optimized film capacitor and inductor are also developed for high efficiency driving. Skim 63 IGBT module of SEMIKRON for automotive is used for power switching device. The most efficient cooling model for optimal size and reliability were verified by simulation. These procedures are verified by bench or driving test and the results are present in this paper.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.753-762
• /
• 2015

This paper presents a nonlinear sliding mode control (SMC) scheme with a variable damping ratio for interior permanent magnet synchronous motors (IPMSMs). First, a nonlinear sliding surface whose parameters change continuously with time is designed. Actually, the proposed SMC has the ability to reduce the settling time without an overshoot by giving a low damping ratio at the initial time and a high damping ratio as the output reaches the desired setpoint. At the same time, it enables a fast convergence in finite time and eliminates the singularity problem with the upper bound of an uncertain term, which cannot be measured in practice, by using a simple adaptation law. To improve the efficiency of a system in the constant torque region, the control system incorporates the maximum torque per ampere (MTPA) algorithm. The stability of the nonlinear sliding surface is guaranteed by Lyapunov stability theory. Moreover, a simple sliding mode observer is used to estimate the load torque and system uncertainties. The effectiveness of the proposed nonlinear SMC scheme is verified using comparative experimental results of the linear SMC scheme when the speed reference and load torque change under system uncertainties. From these experimental results, the proposed nonlinear SMC method reveals a faster transient response, smaller steady-state speed error, and less sensitivity to system uncertainties than the linear SMC method.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1224-1234
• /
• 2019

Hybrid rotor position estimation methods that integrate a fundamental model and high frequency (HF) signal injection are widely used for the wide speed-range sensorless control of interior permanent-magnet synchronous machines (IPMSMs). However, the direct transition of two different schemes may lead to system fluctuations or system instability since two estimated rotor positions based on two different schemes are always unequal due to the effects of parameter variations, system delays and inverter nonlinearities. In order to avoid these problems, a seamless transition strategy to define and construct a virtual q-axis inductance is proposed in this paper. With the proposed seamless transition strategy, an estimated rotor position based on a fundamental model is forced to track that based on HF signal injection before the transition by adjusting the constructed virtual q-axis inductance. Meanwhile, considering that the virtual q-axis inductance changes with rotor position estimation errors, a new observer with a two-phase phase-locked loop (TP-PLL) is developed to accurately obtain the virtual q-axis inductance online. Furthermore, IPMSM sensorless control with maximum torque per ampere (MTPA) operations can be tracked automatically by selecting the proper virtual q-axis inductance. Finally, experimental results obtained from an IPMSM demonstrate the feasibility of the proposed seamless transition strategy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.411-418
• /
• 2016

In accordance with global energy conservation policies such as MEPS(Minimum Energy Performance Standard), electric motor industry is moving to super-high-efficiency machines and research to develop IE4 (International Energy Efficiency Class4) motors has been launched. In this situation, SynRM (Synchronous Reluctance Motor) has been attracting attention in place of induction motor which hardly provides super premium efficiency. As a result, much research on SynRM is being performed at home and abroad. Also, some products have already been appearing in the market. Compared to induction motor, SynRM has better efficiency per unit area and wider operating range. Although the utilization of control system in synchronous motor results in higher prices, we still need to concentrate on developments of SynRM so as to comply with the new policies. This study demonstrated the electromagnetic design methods of super-premium SynRM while maintaining the frame of existing IE3 induction motor for blower. We documented the design procedures for generating high saliency which is the most essential and mechanical stress analysis is also treated. In conclusion, we proved the validity of our design by manufacturing and testing our SynRM models.