• 동력기계공학회지
• /
• 제4권1호
• /
• pp.45-50
• /
• 2000

Circuit breakers have traditionally employed mechanical methods to interrupt excessive currents. According to power semiconductor technology advances in power electronic device, some mechanical breakers are replaced with solid state equivalents. Advantages of the contactors using semiconductor devices include faster fault interrupting, fault current limiting, no arc to contain or extinguish and intelligent power control, and high reliability. This paper describes the design of a static $100{\pm}10%V$ and 0 to 50A DC self-protected contactor with 85A "magnetic tripping" and 100A interruption current at $2.2A/{\mu}s$ short circuit of load condition using a new power device the HARRIS MCT (600V-75A). The self-protection circuit of this system is designed by the classical ZnO varistor for energy absorption and turn-off snubber circuit ("C" or "RCD") of the MCT.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.67.1-67.1
• /
• 2012

Graphene has attracted much attention for future nanoelectronics due to its superior electrical properties. Owing to its extremely high carrier mobility and controllable carrier density, graphene is a promising material for practical applications, particularly as a channel layer of high-speed FET. Furthermore, the planar form of graphene is compatible with the conventional top-down CMOS fabrication processes and large-scale synthesis by chemical vapor deposition (CVD) process is also feasible. Despite these promising characteristics of graphene, much work must still be done in order to successfully develop graphene FET. One of the key issues is the process technique for gate dielectric formation because the channel mobility of graphene FET is drastically affected by the gate dielectric interface quality. Formation of high quality gate dielectric on graphene is still a challenging. Dirac voltage, the charge neutral point of the device, also strongly depends on gate dielectrics. Another performance killer in graphene FET is source/drain contact resistance, as the contact resistant between metal and graphene S/D is usually one order of magnitude higher than that between metal and silicon S/D. In this presentation, the key issues on graphene-based FET, including organic-inorganic hybrid gate dielectric formation, controlling of Dirac voltage, reduction of source/drain contact resistance, device structure optimization, graphene gate electrode for improvement of gate dielectric reliability, and CVD graphene transfer process issues are addressed.

• 전자통신동향분석
• /
• 제32권6호
• /
• pp.8-16
• /
• 2017

In this paper, we review studies attempting to triumph over the limitation of Si-based semiconductor technologies through a heterogeneous integration of high mobility compound semiconductors on a Si substrate, and the co-integration of electronic and/or optical devices. Many studies have been conducted on the heterogeneous integration of various materials to overcome the Si semiconductor performance and obtain multi-purpose functional devices. On the other hand, many research groups have invented device fusion technologies of electrical and optical devices on a Si substrate. They have co-integrated Si-based CMOS and InGaAs-based optical devices, and Ge-based electrical and optical devices. In addition, chip and wafer bonding techniques through TSV and TOV have been introduced for the co-integration of electrical and optical devices. Such intensive studies will continue to overcome the device-scaling limitation and short-channel effects of a MOS transistor that Si devices have faced using a heterogeneous integration of Si and a high mobility compound semiconductor on the same chip and/or wafer.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.348-354
• /
• 2009

본 논문은 p-MOS 트랜지스터에서 음 바이어스 온도 불안정(NBTI) 전류 스트레스 인가에 의해서 드레인 전류, 문턱 전압, 문턱 전압아래 기울기, 게이트유기 드레인 누설(GIDL) 전류가 변화하는 열화특성을 측정하고 분석하였다. 스트레스 시간, 온도와 전계 의존에 연관된 열화 크기는 실리콘/산화막 계면에서 계면 트랩 생성에 좌우된다는 것으로 나타났다. 문턱 전압의 변화와 문턱 전압아래 기울기 사이에 상관관계로부터, 소자 열화에 대한 중요한 메카니즘이 계면 상태의 생성과 관련이 있다는 것을 분석하였다. GIDL 측정 결과로부터, NBTI 스트레스에 기인한 계면상태에서 전자 정공쌍의 생성이 GIDL 전류의 증가를 가져온다. 그러므로 초박막 게이트 산화막 소자에서 NBTI 스트레스 후에 GIDL 전류 증가를 고려하여 야만 한다. 또한, 신뢰성 특성과 dc 소자 성능을 동시에 고려함이 초고집적 CMOSFET의 스트레스 공학기술에서 상당히 필수불가결하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.340-341
• /
• 2012

In this work, we investigated the effects of temperature stress on flatband voltage (VFB) shifts of HfO2-SiO2 double gate dielectrics devices. Fig. 1 shows a high frequency C-V of the device when a positive bias for 10 min and a subsequent negative bias for 10 min were applied at room temperature (300 K). Fig. 2 shows the corresponding plot when the same positive and negative biases were applied at a higher temperature (473.15 K). These measurements are based on the BTS (bias temperature stress) about mobile charge in the gate oxides. These results indicate that the positive bias stress makes no difference, whereas the negative bias stress produces a significant difference; that is, the VFB value increased from ${\Delta}0.51$ V (300 K, Fig. 1) to ${\Delta}14.45$ V (473.15 K, Fig. 2). To explain these differences, we propose a mechanism on the basis of oxygen vacancy in HfO2. It is well-known that the oxygen vacancy in the p-type MOS-Cap is located within 1 eV below the bottom of the HfO2 conduction band (Fig. 3). In addition, this oxygen vacancy can easily trap the electron. When heated at 473.15 K, the electron is excited to a higher energy level from the original level (Fig. 4). As a result, the electron has sufficient energy to readily cross over the oxide barrier. The probability of trap about oxygen vacancy becomes very higher at 473.15 K, and therefore the VFB shift value becomes considerably larger.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.45-49
• /
• 2001

We have investigated physical and electrical properties of the Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin film for alternative gate dielectrics in the metal-oxide-semiconductor device. The oxidation of Hf deposited directly on the Si substrate results in the H $f_{x}$/ $O_{y}$ interfacial layer and the high-k Hf $O_2$film simultaneously. Interestingly, the post-oxidation N2 annealing of the H102/H1Si70y thin films reduces(increases) the thickness of an amorphous HfS $i_{x}$/ $O_{y}$ layer(Hf $O_2$ layer). This phenomenon causes the increase of the effective dielectric constant, while maintaining the excellent interfacial properties. The hysteresis window in C-V curves and the midgap interface state density( $D_{itm}$) of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin films less than 10 mV and ~3$\times$10$^{11}$ c $m^{-2}$ -eV without post-metallization annealing, respectively. The leakage current was also low (1$\times$10-s A/c $m^2$ at $V_{g}$ = +2 V). It is believed that these excellent results were obtained due to existence of the amorphous HfS $i_{x}$/ $O_{y}$ buffer layer. We also investigated the charge trapping characteristics using Fowler-Nordheim electron injection: We found that the degradation of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ gate oxides is more severe when electrons were injected from the gate electrode.e electrode.e.e electrode.e.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.70-78
• /
• 2000

새로운 램프-적분을 이용한 용량차-시간차 변환기를 제안했다. 제안된 회로는 상하대칭으로 두개의 전류 미러, 두 개의 슈미트 트리거, 그리고 제어 논리-회로로 구성된다. 전체 회로를 개별 소자들로 꾸며, 실험한 결과, 제안된 변환기의 센서 커패시터가 295㎊에서 375㎊까지의 커패시턴스 변화에서 1%보다 작은 시간간격(펄스 폭)의 선형 오차를 가진다는 것을 알았다. 제안된 변환기가 335㎊의 센서 커패시턴스를 가질 때, 측정된 용량차와 시간차는 각각 40㎊와 0.2ms이었다. 이 시간차를 빠르고 안정된 클럭으로 카운트함으로써 고 분해능을 제공한다는 것을 알았다. 새로운 램프-적분을 이용한 용량차-시간차변환기를 사용하여 디지털 습도 조절기를 설계하고 실험하였다. 제안된 회로는 전원 전압이나 온도 변화에도 불구하고 용량차에는 거의 영향을 받지 않는다. 또한, 제한된 회로는 적은 수의 MOS 소자로 실현되므로, 작은 칩 면적 위에 집적화 할 수 있는 특징을 갖는다. 따라서 이 회로는 온-칩(on-chip) 인터페이스 회로로 적합하다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2281-2285
• /
• 2011

An algorithm for extracting SPICE MOS level 2 model parameters for the high voltage MOSFET DC model is proposed. The optimization method for analyzing the nonlinear data of the current-voltage curve using the Gauss-Newton algorithm is proposed and the pre-process step for calculating the threshold voltage and the mobility is proposed. The drain current obtained from the proposed method shows the maximum relative error of 5.6% compared with the drain current of 2-dimensional device simulation for the high voltage MOSFET.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.277.1-277.1
• /
• 2016

We report on synthesis of large-area MoS2 using chemical vapor deposition (CVD). Relatively uniform MoS2 are obtained. To fabricate field-effect transistor (FET) devices, MoS2 films are transferred to another SiO2/Si substrate using polystyrene (PS) and patterned using oxygen plasma. In addition, to reduce contact resistance, synthesis of graphene used as channel. Device characteristics are presented and compared with the reported results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.150.1-150.1
• /
• 2015

일부 금속들은 산화물을 형성하여 반도체적 성질을 갖게 되는데 이를 산화물 반도체라 한다. 산화물 반도체는 전자의 전도 특성에 의해 기존에 널리 사용되고 있는 a-Si 반도체 보다 뛰어난 전자 이동도를 갖고 넒은 Band gap energy를 갖기 때문에 누설 전류가 적어 Device 제작 시 저전력 구동이 가능하다는 장점이 있어 관련 연구가 활발히 진행 중이다. 산화물 박막을 증착하는 방법으로는 용액 공정, CVD, Sputtering 등이 있다. 그 중 Sputtering을 이용한 산화물 박막 증착 시 산소 음이온이 기판으로 가속하여 박막에 충돌, 박막 물성에 영향을 준다는 연구결과가 보고되고 있다. 본 연구에서는 Sputtering을 이용하여 ITO를 증착하는 과정에서 발생하는 산소 음이온을 측정하는 장치를 개발하여 산소 음이온 발생여부를 확인해 보았다.