• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1197-1200
• /
• 2014

HEMP 방호시설의 전자파 차폐 성능을 평가하는데 사용하고자 하는 두 시험 규격, IEEE Std. 299 및 MIL-STD-188-125-1은 동일한 방호시설임에도 불구하고, 각기 다른 시험 결과를 제공한다. 특히, 10 kHz~20 MHz 대역의 저주파 자기장 영역에서는 IEEE Std. 299 규격에 의한 시험 결과가 MIL-STD-188-125-1 규격에 비해 20~30 dB 정도 더 낮게 평가됨을 확인하였다. 이러한 결과는 두 규격에서 규정하고 있는 측정 조건이 상이함에 기인하며, 따라서 측정거리의 단축을 위해 IEEE Std. 299 규격을 적용할 경우에는 기존의 MIL-STD-188-125-1 규격에 근거하여 작성된 전자파 차폐 성능 요구는 재조정되어야 한다.

• 한국전자파학회논문지
• /
• 제30권4호
• /
• pp.320-323
• /
• 2019

본 논문에서는 MIL-STD-188-125-1에서 제시된 저주파수 자기장 차폐효과 측정 방법의 문제점을 살펴보고, 그 문제점을 개선하기 위해서 직시각형 루프 안테나를 이용한 측정 방법을 제안하였다. 시뮬레이션을 통해 기존의 원형 루프 안테나를 사용했을 때보다 슬롯의 위치에 따른 차폐효과 차이를 줄일 수 있음을 확인하였고, 실험을 통해 검증하였다.

• 한국인터넷방송통신학회논문지
• /
• 제16권4호
• /
• pp.47-52
• /
• 2016

본 연구에서는 고고도 핵폭발에 기인한 HEMP의 영향으로부터 민간시설의 적합한 보호를 위한 HEMP 보호용 전원선 필터 구현 필요성을 다루기 위해, HEMP 관련 국방 규격 분석 및 바리스터, 관통형 커패시터, 가스방전관, 인덕터 등의 주요 소자들에 대한 분석을 수행하고, 이를 기반으로 단상 220VAC/16A 용량의 HEMP용 전원선 필터를 간이 제작하였다. 또한 배선용 차단기, 서지 보호기, EMI 필터 등과의 MIL-STD-188-125 PCI 규격 기반의 비교 실험을 수행하였다. 결과적으로 HEMP에 의한 전도성 노이즈로부터 시스템을 보호하기 위해서는 HEMP 보호 전용 필터의 개발이 필수조건임을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.20-21
• /
• 2016

In this study, the shielding properties of concrete with conductive materials as shielding material for electromagne- tic pulse(EMP) within 10kHz~18GHz were investigated. The shielding effectiveness of specimens were compared with different entrained materials. The shielding effectiveness were determined according to MIL-STD-188-125-1, IEEE-STD-299 at 28 days of concrete curing. The results of shielding effectiveness did not meet the criteria(80dB) severely.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.241-245
• /
• 2019

This work presents the response characteristics of a ZnO varistor to conductive EMP. An E1 pulse, standardized to MIL-STD-188-125-1, was applied to the varistors wherein the residual current and response times were measured with the applied E1 pulse current. Additionally, the response time was measured according to the length of the connection path. Consequently, the amplitude of the residual voltage through the ZnO varistors was increased with increasing amplitude of the applied E1 pulse current. As the length of the connection path increased, the operating response time and residual peak voltage also increased. These results indicate that the response characteristics of ZnO varistors can be applied to basic data to support the use of varistors as a protective measure against conductive EMP.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.41-42
• /
• 2016

In this study, the basic properties of concrete with entrained materials as shielding material for electromagnetic pulse(EMP) within 10kHz~1GHz were investigated. The concretes of moderate strength were prepared with different entrained materials. The shielding effectiveness will be determined according to MIL-STD-188-125-1 at 28 days of concrete curing. The results of physical properties were all satisfied of setting criteria.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.50-51
• /
• 2018

In this study, it evaluate the electromagnetic pulse shielding performance of amorphous metallic fiber reinforced cement composite with other steel fiber reinforced cement composite. Hooked-ended steel fiber, smooth steel fiber and amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electromagnetic pulse shielding performance was evaluated by MIL-STD-188-125-1. As a result, shielding performance of amorphous metallic fiber reinforced cement composite was higher than Hooked-ended and smooth steel fiber reinforced cement composites. In addition, the relationship between the electrical conductivity and the electromagnetic pulse shielding performance of the cement composite was confirmed.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.151-161
• /
• 2019

In this study, to evaluate the High Altitude Electromagnetic Pulse(HEMP) protection performance of UHPC/CNT composites by the content of Carbon nanotubes(CNTs), Electromagnetic Shielding Effectiveness(SE) test was performed based on MIL-STD-188-125-1. And the results were verified by applying the Antenna theory. In the case of UHPC with a thickness of 200 mm mixed with 1 % CNT of cement weight, the SE was 28.98 dB at 10 kHz and 45.94 dB at 1 GHz. Then the Scabbing limit thickness for bullet proof was computed based on the result of compressive strength test which was 170 MPa, and it was examined whether it satisfied the HEMP protection criteria. As a result, the required HEMP shielding criteria were satisfied in all frequency ranges as well as the scabbing limit thickness was reduced by up to 43 % compared with that of ordinary concrete.

• 한국전자파학회논문지
• /
• 제30권4호
• /
• pp.324-327
• /
• 2019

본 논문에서는 확산과 슬롯 효과를 고려한 도체 판의 저주파수 자기장 차폐효과를 수치해석과 해석적인 해를 통해 분석하였다. 도체 판의 전도율이 낮은 경우에는 확산에 의한 투과가 지배적이며, 전도율이 높거나 주파수가 높아지면 표피효과로 인해 확산에 의한 투과는 줄어들고, 슬롯이 있는 경우 슬롯에 의한 투과가 우세함을 확인하였다. 이러한 결과는 향후 고출력 전자파 방호시설의 자기장 차폐설계 및 평가기준에 대한 가이드라인으로 활용될 수 있다.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.84-89
• /
• 2013

This study aims to examine the effectiveness of electromagnetic pulse shielding in cast-in-place protective shelters using corrugated metal-plates, and then reviews their usability for the Republic of Korea Army. The Korea Corps of Engineering has evaluated corrugated metal-plates as a construction material for cast-in-place structures, which have to defend against mechanical impacts as well as electromagnetic pulses. Corrugated metal-plate is known as a superb mechanical protective material, so much so that it has been employed in ammunition magazines and artillery platforms in the armed forces. Moreover, as a metal, such as steel and copper, it is universally recognized as one of the most effective electromagnetic pulse shielding materials. In addition to effectively shielding from electromagnetic pulses and protecting against mechanical impacts, corrugated metal-plates should prove to be an appropriate construction material for the cast-in-place protective shelter in terms of construction availability and economic feasibility. The shielding effectiveness of the suggested structures is examined based on MIL-STD 188-125-1. A few frequency bands need an increase of 15~30dB in shielding effectiveness because of unbidden apertures caused by flaws associated with welding, assembling, and material deformation. However, allowing for the approximately 40dB of shielding provided by soil; the examined structure, which is buried underground, can offset its shortcomings sufficiently.