• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.429-432
• /
• 2000

We propose a new frame rate up-conversion algorithm for high quality video. In the proposed scheme bidirectional motion estimation (ME) is performed to construct the motion vector. (MV) field for the frame to be interpolated. Unlike conventional motion-compensated interpolation (MCI) algorithms, the proposed technique does not produce any overlapped pixel and hole region in the interpolated frame, and thus can utilize the overlapped block motion compensation technique to reduce the blocking artifacts. The proposed algoritm is very simple to implement on consumer products when compared to conventional MCI methods. Computer simulation shows a high visual performance of the proposed frame rate up-conversion algorithm.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.14-17
• /
• 1993

본 연구는 CSDP-초기설계 시스템 개발'3' 세부과제로 수행되었으며 선박의 기본 성능 및 사양을 결정하는데 필요한 제반 기본 계산을 수행하고 설계자의 의사결정을 지원하는 대화식 초기 설계 전산 시스템의 개발에 그 목적이 있으며, 크게 개념설계 분야와 선형 설계분야로 나누어 개발 되어왔다.(Fig. 4.1 참조). 이번 4차년도에는, 프로그램을 보다 효율적으로 사용할 수 잇도록 하기 위하여 개년설계 시스템을 구성하는 단위 모듈들을 단독으로 사용 가능하도록 독립성을 유지 함과 동시에, 시스템 차원의 상위 레벨에서 각각의 모듈들을 통합 제어하는 수퍼어플리케이션 개념을 이용한 유연화된 대화형 개념설계 프로그램(BASCON-3)을 개발하였다. 그리고 선박의 주기관 선정과 관련한 경험적 지식을 도출하여 지식베이스를 구성하고, 주기관 데이터베이스 및 저항.추진성능 추정 모듈들과의 통합을 통한 시험형의 주기관 선정 지원 시스템(ME-ASSIST )을 개발하였다. 또한 그래픽 사용자 인터페이스(GUI)를 채택한 확장형 선형 정의 및 변환 프 로그램(MBASTRANS)을 개발하였다. 형상 모델러인 ACIS를 도입하여, 조선 분야에의 활용 가 능성을 연구하였고, 조선소에 GUI개발 기술과 시스템 통합 기술을 이전하였다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.405-406
• /
• 2008

This paper presents a high performance 2D PE architecture for H.264 Motion Estimation(ME). While existing 2D PE architectures reuse the overlapped data of adjacent search windows scanned in 1 or 3-way, the new architecture scan adjacent windows and multiple paths instead of single raster and zigzag scanning of adjacent windows in 4 way(up,down,left,right). By reducing the redundant access factor by 1.4, the new 4-way search window improve the memory bandwidth by 70-58% compared with 1/3-way search window. With Altera Stratix-III implementation, the high performance 2D PE architecture deals with SD ($720{\times}480$) video of 2 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps at 97.1MHz.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.785-786
• /
• 2008

In this paper, we propose a fast Motion Estimation (ME) algorithm for low computational complexity based on spatial correlations. The proposed algorithm uses the motion vector of neighboring blocks, to decide the location of initial searching point. The number of searching point decreases by changing the location of initial searching point. Experimental results show that the proposed algorithm reduces searching points about $7{\sim}13%$ and increases PSNR about $0.1{\sim}0.5$(dB) compared with conventional algorithm.

• Progress in Medical Physics
• /
• v.4 no.2
• /
• pp.37-47
• /
• 1993

The quality of radiation for a high energy x-ray beam can be specified by its attenuation curve in a selected material. The inverse Laplace transform of the attenuation curve can be used as an approximate indication of the energy spectrum of the beam. We have made a comparative investigation of the estimated spectrum obtained by the Laplace transform analysis of the transmitted exposure data measured in an absorption study of a 6MV x-ray beam. Two of existing transform pair models have been investicated and discussed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.120-124
• /
• 1994

Browse from oriental white oak(Quercus aliena Blume) was analysed for nutritive value and biomass estimation. The content of cmde protein was high on August and September. NDF, ADF and lignin contents were increased with progressing the seasons but IVDMD, TDN, DE and ME levels were not different from the variation of seasons. Tannin content was high on May and June. Basal stem diameter $\times$ height of tress was highly correlated with browse dry weights(r=0.80**) and the linear regression equation are the follows; Y = 8.23 + O.57X(Y = browse dry weight(g), X= basal stem diameter $\times$ height(cm)). Using the traditional cutting method, the amounts of browse was determined as 823 g dry weight per tree, while the new method by the above equation gave a similar results, i. e., 793 g dry weight per tree. The possibility of browse biomass estimation of oriental white oak by the basal stem diameter $\times$ height index was found.

• Nuclear Engineering and Technology
• /
• v.3 no.2
• /
• pp.77-97
• /
• 1971

The experimental fission cross-section data of U-238, Np-237 and Th-232, published up to the end of 1970, are reviewed and analyzed between their respective thresholds and 20.0 MeV. The results of a statistical analysis of the available data, performed with a weighted Least-squares Orthogonal Polynomial Pitting computer programme are presented in the form of point-wise cross-section values together with their uncertainties, and in the form of graphs of the fitted curves with an indication of a region of 95% statistical confidence level. An estimate of the fission spectrum weighted average cross-sections and their respective uncertainties is also given.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.6
• /
• pp.48-53
• /
• 2002

품질보증 부분에서 대부분 통계적 수법들은 기지분포를 가정하여 데이터를 분석하고 있다. 예를 들면 공정능력에서는 정규분포를 가정하고 있고, 신뢰성 분석에서는 지수분포, 대수정규분포 또는 와이블분포 등을 가정하고 있다. 만약 이러한 것들이 가정하는 확률분포와 크게 편의될 때 도출된 결론은 그 유효성을 상실하게 된다. 따라서 공정이 정규분포를 하지 않는다면 정규분포에 기초한 공정능력지수의 사용은 부정확한 공정의 정보를 제시하게 된다. 이러한 문제를 해결하기 위하여 그 사례로 소표본일 경우 정규성의 유무를 Lilliefors 검정통계량으로 검정하였다. 그리고 최우추정량(MLE), 수정적률추정량(MME), 및 적률추정량(ME)을 사용하여 모수추정을 하여 그 각각의 경우에 공정능력지수로 평가하였다. 공정능력지수의 평가는 공정이 지수분포를 하는 경우에 적합한 공정능력지수($C_{pe}$)를 제안하고, 이것의 대안으로써 Pearson 시스템, Johnson 시스템 및 Burr 시스템과도 비교평가 하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.368-371
• /
• 2009

Earth parameters me essential to design and analysis of earth. In this study, a algorithm to estimate earth parameter using artificial neural network(ANN) was proposed. Structures of the soil are grouped by using KSOM algorithm before estimation. Earth parameter is obtained by using BP algorithm. The effectiveness of the proposed algorithm was verified in the case study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.121-127
• /
• 2013

Memory devices including SRAM and DRAM are very susceptible to high energy radiation particles in the space. Abnormal operation of the devices is caused by SEE or TID. This paper presents a method to estimate proton SEU cross section representing the susceptibility of the latch circuit that the unit cell of the SRAM and proposes a new latch circuit to mitigate the SEU. 50b shift register was fabricated by using the conventional latch and the proposed latch in $0.35{\mu}m$ process. Irradiation experiment was conducted at KIRAMS by using 43MeV proton beam. It was found that the proposed latch-shift register is not affected by the radiation environment compared to the conventional latch-shift register.