• 제목/요약/키워드: MCC

검색결과 219건 처리시간 0.023초

MCC 모델 및 Hvorslev-MCC 모델의 비교 연구 (Study on MCC and Hvorslev-MCC Models)

  • 김대규
    • 한국산학기술학회논문지
    • /
    • 제8권3호
    • /
    • pp.615-619
    • /
    • 2007
  • 본 연구에서는 한계상태이론에 기초하며 비교적 적은 매개변수를 활용하도록 최근에 개발된 Hvorslev-MCC 모델 및 전통적 MCC 모델의 거동예측 능력을 엄격하게 수행된 삼축압축시험 결과와 비교하여 고찰하였다. 모델예측 결과의 차이는 과압밀점토 시료에서 주로 발생하였다. Hvorslev-MCC 모델은 과압밀점토 시료의 첨두강도를 매우 정확히 예측하였으며, 이는 한계상태 건조 측의 항복면에 단순 타원이 아닌 Hvorslev 면을 활용하였기 때문이다.

  • PDF

Chitin의 분자량과 Phosphorylation 정도가 Microcrystalline Chitin의 유화안정 능력에 미치는 영향 (The Effect of Molecular Size and Degree of Phosphorylation on the Emulsion Stability of Microcrystalline Chitin)

  • 이영춘;임지순
    • 한국식품과학회지
    • /
    • 제28권6호
    • /
    • pp.1009-1013
    • /
    • 1996
  • 게껍질로부터 얻은 분자량이 다른 chitin을 phosphorylation하여 얻은 MCC의 유화 안정능력은 중간 분자량의 chitin에 40% phosphorylation시킨 것(M-40-MCC)이 가장 좋았다. 그리고 MCC의 지방 결합 능력은 사용한 chitin의 분자량 크기에 별 영향을 받지 않았으나, phosphorylation 정도가 높은 MCC는 지방 결합 능력 이 커지는 경향을 보였다. 액상 커피 creamer에 사용되는 유화제의 50-70%를 MCC로 대체하여 제품을 만들어 품질을 평가한 결과 유화 안정성이 만족스러웠고, MCC를 첨가하면 creamer의 점도가 감소하는 경향을 나타내었다. 그리고 creamer의 백탁능력을 커피에 평가한 결과 MCC 첨가한 creamer의 L 값이 대조구보다 우수하였다. 그리고 creamer제품의 관능검사 결과 시료간에 여러가지 관능적 특성에 차이가 없었으나, MCC를 70% 첨가하면 creamer의 구수한 맛이 대조구보다 떨어지고 전체적인 선호도도 감소하는 것으로 나타났다 이들 결과를 종합해 보면 액상 커피 creamer에 50%정도의 MCC를 첨가하는 것이 적당한 것으로 평가되었다.

  • PDF

오일팜 EFB(Empty fruit bunch)를 이용한 MCC 제조 및 제제 적용성 평가 (Preparation and Evaluation of Tabletting properties of Microcrystalline Cellulose from Oil Palm Empty Fruit Bunch)

  • 김동성;성용주;김철환;김세빈
    • 펄프종이기술
    • /
    • 제48권2호
    • /
    • pp.46-55
    • /
    • 2016
  • The microcrystalline cellulose (MCC) was prepared from oil palm biomass, empty fruit bunch (EFB) for increasing the usability of EFB. The morphological, physical and chemical properties of MCC made from EFB were evaluated by comparing with those of the commercial MCC obtained from AVICEL. The EFB-MCC had the wider distribution in particle size and there were many small particles around $10{\mu}m$. There were no significant differences in the cellulose crytallinity and the chemical composition between EFB-MCC and AVICEL-MCC. The properties of tablet samples made by the common direct compression process were evaluated depending on the types of MCC and the compression pressure during tablet making process. The tablet made of EFB MCC showed the higher compressed structure, which resulted in the less disintegration by the water soaking treatment than those made of Avicel-MCC. The results of this study showed that the EFB-MCC could be utilized as one of the commercial MCC.

고령화연구패널조사 2014-2018년 데이터를 이용한 한국 노인의 복합만성질환 변화와 본인부담 총 의료비의 연관성 (Association between Changes in Multiple Chronic Conditions and Health Expenditures among Elderly in South Korea: Korean Longitudinal Study of Aging 2014-2018)

  • 박수진;남진영
    • 보건행정학회지
    • /
    • 제32권3호
    • /
    • pp.282-292
    • /
    • 2022
  • Background: Aging societies face social problems of increased medical expenses for older adults due to increased geriatric diseases. This study aims to analyze the relationship between the state change of multiple chronic conditions (MCC) and out-of-pocket medical expenses in the elderly aged 60 or older. Methods: The 2014-2018 Korean Longitudinal Study of Aging data were used for 2,202 elderly people. Four status change groups were established according to the change in the number of chronic diseases. The association between the change of MCC and the out-of-pocket medical cost was analyzed using the generalized estimating equation model analysis. Results: The average out-of-pocket total medical costs were 1,384,900 won for participants with MCC and 542,700 won for those without MCC, which was a statistically significant difference (p<0.0001). Compared to the reference group (simple chronic disease, SCD→SCD), the change in multiple chronic conditions significantly increased the total out-of-pocket medical expenses in MCC→MCC and SCD→MCC groups (MCC→MCC: 𝛽=0.8260, p<0.0001; SCD→MCC: 𝛽=0.6607, p<0.0001). Conclusion: In this study, it was confirmed that the prevalence of MCC increased with age, and the out-of-pocket medical cost increased in the case of MCC. Continuity of treatment can be achieved for patients with MCC, and the system and management of treatment for MCC are required to receive appropriate treatment.

게 껍질로부터 Microcrystalline Chitin 제조와 특성 규명 (Preparation and Characterization of Microcrystalline Chitin from Crab Shell)

  • 김성배
    • KSBB Journal
    • /
    • 제11권4호
    • /
    • pp.481-488
    • /
    • 1996
  • Chitin 유도체의 다양한 응용성에도 불구하고 chi­tin의 강한 내약품성과 적당한 용매부재로 산업적인 용도개발은 매우 부진한 실정 이다. 이와 같은 chitin 의 강한 내약품성을 완화시키는 방법의 하나는 chi­tin을 가수분해하여 MCC를 제조동}는 것이다. 기존의 MCC 제조공정은 주로 강산을 사용하는 공정이어서 사용한 산을 제거하거나 회수하기 위해 많은 후처리가 필요하다. 그래서 이를 대체할 수 있는 공정으로 초음파와 과산화수소를 붉은 엽산과 함께 사용하는 공정을 개발하였다. 이 공정의 주요변수로는 산농도, 팽윤시간 및 온도 그리고 초음파 조사시간 및 주파수이고 이들 변수가 분자량에 미치는 영향을 조사하였다. MCC의 분자량은 chitin 분자량 크기의 약 1/8인 30,000 정도였고, 어떤 일정한 크기에 접 근해 가는 것을 발견하였다. 이와 같은 현상은 cellu lose의 분자배열모델을 도입하여 해석하였다. Chitin 과 MCC 모두 섬유형태로 되어 었으며, MCC의 fi bril 크기는 chitin의 fibril 크기보다 훨씬 작음을 알 수 있었다.

  • PDF

모터제어센터의 효율적인 운영을 위한 실시간 관리 시스템의 설계 및 구현 (Design and Implementation of Real-Time Management System for Efficient Operation of Motor Control Center)

  • 이태오
    • 한국정보통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.247-253
    • /
    • 2008
  • 본 논문은 모터제어센터의 감시와 제어를 통한 효율적인 운영을 위한 실시간 관리 시스템의 설계 및 구현에 대해서 논한다. 실시간 관리 시스템은 하드웨어(MCC 판넬)와 소프트웨어(관리 프로그램)로 나눌 수 있다. 첫 번째, 하드웨어는 모터가 부착된 부하부분과 제어와 데이터 네트워크를 운용할 수 있는 MCC 구성요소 이다. 두 번째, 관리 프로그램은 통신인터페이스, 환경설정, 데이터의 처리 부분으로 구성되어 있다. 제작 구현된 MCC 판넬의 축소형 모델은 m-PRO, iM-PRO 디바이스, 하이퍼터미널을 이용하여 사전 테스트하였다. 그리고 필드 테스트를 위하여 MCC 판넬은 RS-232C/485를 이용하여 테스트하였고, 관리 시스템의 통신 절차는 제어 명령을 이용하여 메시지를 송 수신하여 확인 하였다. 실험 결과, 구현한 실시간 관리 시스템은 MCC 시스템을 효과적으로 운영하는데 이용할 수 있다.

충격성 잡음에 강인한 코렌트로피 기반 블라인드 알고리듬의 성능분석 (Performance Analysis of Correntropy-Based Blind Algorithms Robust to Impulsive Noise)

  • 김남용
    • 한국통신학회논문지
    • /
    • 제40권12호
    • /
    • pp.2324-2330
    • /
    • 2015
  • 충격성 잡음하의 블라인드 신호처리 분야에서 최대 상호 코렌트로피 알고리듬 (MCC)이 MSE 기반의 알고리듬에 비해 우수한 성능을 보인다. 그러나 MCC 알고리듬에 대한 최적 가중치 조건들이나 충격성 잡음에 대한 내성과 관련된 특성들은 아직 충분히 연구되지 못한 상태이다. 이 논문에서는 MSE기반의 LMS 알고리듬과 비교를 통해 MCC의 최적 가중치의 성질을 분석하여 MCC 알고리듬의 최적 가중치가 MSE기반의 LMS 알고리듬과 같다는 보인다. 또한 MCC의 최적 가중치가 충격성 잡음 하에서도 동요 없이 안정을 유지하는 요인이 입력 크기 조정에 있다는 것을 시뮬레이션을 통해 입증하였다.

미세결정화키틴과 팜유의 수준을 달리한 식이가 흰쥐의 지방대상에 미치는 영향 (The Effects of Micro Crystalline Chitin and Palm Oil on the Lipid Metabolism in the Rat)

  • 이종미
    • Journal of Nutrition and Health
    • /
    • 제30권7호
    • /
    • pp.789-796
    • /
    • 1997
  • The effects of MCC and palm oil at different levels on lipid metabolism were assessed in adolescent rat. Dietary fat levels were 20% and 40% (kcal/kcal) and MCC level were 0%, 2%, and 4% (wt/wt). The experimental period took 8 weeks. During the experiment, weight gain and food efficiency ration were not affected by dietary factors. The weight of thymus however, was lower in high fat groups than in middle fat groups. The contents of total lipid and total cholesterol in plasma and HDL-cholesterol in plasma and HDL-cholesterol were significantly affected by dietary factors. The concentrations of cholesterol in LDL and VLDL , and the triglyceride content of VLDL was higher in high fat groups than in middle fat groups. Adding MCC lowered the LDL triglyceride in the high fat groups. The analysis of plasma fatty acids generally reflected the composition of the dietary palm oil. MCC had significant effects on total lipid and triglyceride of feces, but not on total cholesterol . In conclusion, the level of MCC had little hypolipodemic effects on lipid metabolism in rats fed a high fat diet. the middle fat group that contained 4% MCC showed increased contents of fecal triglyceride than the others, indicating that MCC had an effect on lipid absorption. Therefore, the other physiological functions of MCC need to be tested for their useful applications.

  • PDF

Microcrystalline cellulose에 자유 라디칼을 이용한 methyl methacrylate의 그래프팅 반응과 이를 이용한 천연복합필름의 제조 (Grafting of MMA onto MCC through free radical method and its application to all natural cellulose composite film preparation)

  • 이수;박상희;진석환;이선영
    • 한국응용과학기술학회지
    • /
    • 제25권4호
    • /
    • pp.459-468
    • /
    • 2008
  • Methyl methacrylate(MMA) was grafted onto microcrystalline cellulose(MCC) with ceric ammonium nitrate(CAN) as a redox initiator at the various conditions. The cellulose triacetate(CTA) composite films added MCC and MMA-grafted MCC powders were prepared on a glass plate. The graft yield(GY) and graft efficiency(GE) of the grafted MCC were calculated with the simple equations by the weight balance method. The double bond of C=O on the grafted MCC surfaces was confirmed by the fourier transform infrared spectroscopy with attenuated total reflection(FT-IT ATR) spectrophotometer. After grafting, the degree of crystallinity of cellulose powders was decresed by judging from x-ray diffraction(XRD) data. Scanning electron microscope(SEM) photos showed the only solvent and CAN solution could change the roughness of MCC powders and the effect of powder dispersions in composite matrix. The tensile strength of MCC/CTA composite films was decreased with increase of MCC powder contents. When 5% grafted MCC was added, the tensile strength of grafted MCC/CTA composite films was increased from 82.3 MPa to 97.2 MPa. The thermal property of powders was also analyzed by the thermogravimetric analysis(TGA).

CO2 흡착 충전제 제조를 위한 microcrystalline cellulose (MCC) 입자 표면개질연구 (Surface Modification of Microcrystalline Cellulose (MCC) Filler for CO2 Capture)

  • 양여경;박성환;김한나;황기섭;하기룡
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.60-67
    • /
    • 2017
  • 본 연구에서는 생분해성인 microcrystalline cellulose (MCC)를 표면 개질하여 음식포장재로 사용하는 polyethylene (PE) 복합체의 충전제로 사용하기 위한 사전 연구를 수행하였다. 1 분자 당 1 차 아미노기 1개와 2차 아미노기 2개씩을 가지는 실란커플링제인(3-trimethoxysilylpropyl)diethylenetriamine (TPDT)를 사용하여 MCC 표면에 이산화탄소 흡착 기능이 있는 아미노기를 도입하였다. TPDT 도입량, 팽윤시간, 반응온도 및 반응시간과 같은 다양한 반응 조건들을 변화시켜 각각의 반응조건의 변화가 MCC 표면 개질 정도에 미치는 영향을 연구하였다. MCC 표면에 접목된 TPDT의 양 및 화학결합생성을 Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) 및 고체 상태 $^{29}Si$ nuclear magnetic resonance (NMR)법을 사용하여 분석하였다. 반응시간, 반응온도 및 TPDT 도입량이 증가할수록 MCC 표면에 접목되는 TPDT 양이 증가함을 확인하였다.