• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.299-306
• /
• 2001

Crushed Stone Pile(CSP) is one of the ground improvement methods available to loose sand and clayey ground by forming compacted CSP in the weak soil layer. The effects of this method are enhancement of ground bearing capacity, reduction of settlement and prevention of lateral ground movement in cohesive layer, reduction of liquefaction potential in sandy ground. This study performs model tests in 1.0m${\times}$1.0m${\times}$1.0m and 1.5m${\times}$1.5m${\times}$l.2m model tank to observe bearing capacity of CSP treated ground. The area replacement ratio of CSP composite ground varies 20%, 30% and 40% with square grid pattern. After the composite ground was consolidated under pressure of 0.5kg/$\textrm{cm}^2$ and 1.0kg/$\textrm{cm}^2$, load tests were carried out. The results show that ultimate bearing capacity increases with area replacement ratio and the preconsolidation pressure of ground.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.345-346
• /
• 2006

In the future, a machine will be more improved in the form of advanced concept with collaborative ability in M2M(Machine to Machine, Mobile to Machine) environment for u-Manufacturing system. This paper tried to standardize M2M and design advanced concept machine. The M2M is front-end system for implementing autonomous ubiquitous environment. The advanced machine in M2M will be a collaborative machine with knowledge-evolutionary ability such as u-Machine(Ubiquitous machine), Vortal(Vertical Portal) machine and P2P(Peer to Peer) machine. Such advanced concept machines will be the key subject for M2M cooperation.

• 대기
• /
• 제29권1호
• /
• pp.61-74
• /
• 2019

To investigate the observational environment, sky line and skyview factor (SVF) are calculated using a digital elevation model (DEM; 10 m spatial resolution) and 3 dimensional (3D) sky image at radiation site, Gangneung-Wonju National University (GWNU). Solar radiation is calculated using GWNU solar radiation model with and without the sky line and the SVF retrieved from the 3D sky image and DEM. When compared with the maximum sky line elevation from Skyview, the result from 3D camera is higher by $3^{\circ}$ and that from DEM is lower by $7^{\circ}$. The SVF calculated from 3D camera, DEM and Skyview is 0.991, 0.998, and 0.993, respectively. When the solar path is analyzed using astronomical solar map with time, the sky line by 3D camera shield the direct solar radiation up to $14^{\circ}$ with solar altitude at winter solstice. The solar radiation is calculated with minutely, and monthly and annual accumulated using the GWNU model. During the summer and winter solstice, the GWNU radiation site is shielded from direct solar radiation by the west mountain 40 and 60 minutes before sunset, respectively. The monthly difference between plane and real surface is up to $29.18M\;m^{-2}$ with 3D camera in November, while that with DEM is $4.87M\;m^{-2}$ in January. The difference in the annual accumulated solar radiation is $208.50M\;m^{-2}$ (2.65%) and $47.96M\;m^{-2}$ (0.63%) with direct solar radiation and $30.93M\;m^{-2}$ (0.58%) and $3.84M\;m^{-2}$ (0.07%) with global solar radiation, respectively.

• 운동과학
• /
• 제21권2호
• /
• pp.231-242
• /
• 2012

본 연구의 목적은 운동부하검사에서 일반적으로 많이 사용하는 Bruce protocol을 이용한 최대하 운동의 대사반응, 주요 시점의 심박수 기록 및 1,200 m 달리기 기록을 이용하여 최대산소섭취량을 추정하는 모형을 개발하고 모형간 추정의 타당도를 분석하는 데 있다. 연구대상은 성인 남성 255명(1,200 m 달리기는 133명)이며 Bruce protocol을 이용하여 최대운동부하검사를 실시하였고, 3분인 1단계와 6분인 2단계 종료 시점의 대사반응을 측정하였다. 측정항목은 VO₂(㎖㎖/kg/min), VCO₂(㎖/kg/min), VE(L/min) 및 HR(bpm), HR가 150 bpm과 170 bpm에 도달하는 시간, Bruce protocol 6분과 3분 심박수 차이, 1,200 m 달리기 기록 등이었다. 신체자료와 최대하 운동 중 대사반응을 이용하여 최대산소섭취량을 산출하는 모형을 개발하기 위하여 다중회귀분석을 실시하였다. 모든 변수를 동시투입법으로 분석한 전체모형의 R은 0.642이고(p<.01) 추정의 표준오차(SEE)는 4.38 ㎖/kg/min, 변동계수(CV)는 10.8%이었으나(p<.01), 다중공선성이 나타났다. 단계별분석법으로 분석한 3분모형1과 모형2의 R은 0.341과 0.461이고, SEE는 6.05와 5.72 ㎖/kg/min, CV는 14.9와 14.1%로 나타났고(p<.01), 다중공선성이 나타나지 않았다. 6분모형1과 모형2의 R은 0.350과 0.456이었고(p<.01), SEE는 6.03과 5.74 ㎖/kg/min, 변동계수(CV)는 14.9와 14.2%로 나타났으며(p<.01), 다중공선성이 나타나지 않았다. 6분HR-3분HR 모형의 R은 0.150, HR150모형은 0.151, HR170모형은 0.154로 나소 낮게 나타났고, SEE는 6.36~6.37 ㎖/kg/min으로 유사하게 나타났고, CV도 15.7%로 유사하게 나타났다. 1,200 m 달리기 모형의 R은 0.444이고, SEE는 4.82 ㎖/kg/min, CV는 11.9%로 나타났다. 결론적으로 Bruce protocol을 이용하여 실시한 최대산소섭취량 추정 방법 중 실용적인 유용성과 간편성을 고려하면 대사반응을 이용한 6분모형과 3분모형이 적합한 모형으로 나타났고, 심박수 모형과 달리기 모형은 추정의 정확도가 다소 낮게 나타났다.

• 산업융합연구
• /
• 제2권2호
• /
• pp.127-147
• /
• 2004

This paper examines the time-series relations among expected return, risk, and book-to-market(B/M) at the portfolio level. The time-series analysis is a natural alternative to cross-sectional regressions. An alternative feature of the time-series regressions is that they focus on changes in expected returns, not on average returns. Using the time-series analysis, we can directly test whether the three-factor model explains time-varying expected returns better than the characteristic-based model. These results should help distinguish between the risk and mispricing stories. We find that B/M is strongly associated with changes in risk, as measured by the Fama and French(1993) three-factor model. After controlling for changes in risk, B/M contains little additional information about expected returns. The evidence suggests that the three-factor model explains time-varying expected returns better than the characteristic-based model.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.433-446
• /
• 2020

In this paper the effect of confining pressure and tunnel depth on the ground vertical settlement has been investigated using particle flow code (PFC2D). For this perpuse firstly calibration of PFC2D was performed using both of tensile test and triaxial test. Then a model with dimention of 100 m × 100 m was built. A circular tunnel with diameter of 20 m was drillled in the middle of the model. Also, a rectangular tunnel with wide of 10 m and length of 20 m was drilled in the model. The center of tunnel was situated 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m, 55 m and 60 m below the ground surface. these models are under confining pressure of 0.001 GPa, 0.005 GPa, 0.01 GPa, 0.03 GPa, 0.05 GPa and 0.07 GPa. The results show that the volume of colapce zone is constant by increasing the distance between ground surface and tunnel position. Also, the volume of colapce zone was increased by decreasing of confining pressure. The maximum of settlement occurs at the top of the tunnel roof. The maximum of settlement occurs when center of tunnel was situated 15 m below the ground surface. The settlement decreases by increasing the distance between tunnel center line and measuring circles in the ground surface. The minimum of settlement occurs when center of circular tunnel was situated 60 m below the surface ground. Its to be note that the settlement increase by decreasing the confining pressure.

• 한국IT서비스학회지
• /
• 제11권1호
• /
• pp.125-139
• /
• 2012

Machine-to-Machine(M2M) refers to technologies allowing both wireless and wired systems to communicate with other devices. The enhancement of wireless technologies and the reduced cost of wireless connection have contributed toward the development of M2M market. M2M market currently focuses on public sector services, As M2M can offer scalable and flexible services, M2M services are expected to be applied in various fields. However there are still some doubts on whether the demand for M2M services will be increased. This study investigates the feasibility of M2M services from the perspective of operators. Operators evaluate that M2M services will show high marketability but low profitability in general. In addition, operators predict that M2M services will show both marketability and profitability in the area of car maintenance, insurance, telematics, home and office security, shop floor maintenance, and real-time locating services for children protection. This study may offer some ideas of M2M business models based on empirical feasibility studies.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.117-130
• /
• 1989

In this study, an implicit one-dimensional model, DWRM(Dynamic Wave Routing Model) was developed by using the four-point weighted difference method. By applying the developed model to the Keum River, the parameters were calibrated and the model applicability was tested through the comparison between observed and computed water levels. In addition, the effects of the construction of an estuary dam to the flood wave were estimated as a result of the model application. The results of the study can be summarized as follows; 1. The roughness coefficients were evaluated by comparison between observed and computed water level at Jindu, Gyuam and Ganggyeung station in 1985. The Root Mean Squares for water level differences between observed and computed values were 0.10, 0.11, 0. 29m and the differences of peak flood levels were 0.07, 0.02, 0. 07m at each station. Since the evaluated roughness coefficients were within the range of 0.029-0.041 showing the realistic value for the general condition of rivers, it can be concluded that the calibration has been completed. 2. By the application of model using the calibrated roughness coefficients, the R. M. S. for water level differences were 0.16, 0.24, 0. 24m and the differences of peak flood level were 0.17, 0.13,0.08 m at each station. The arrival time of peak flood at each station and the stage-discharge relationship at Gongju station agreed well with the observed values. Therefore, it was concluded that the model could be applied to the Keum River. 3. The model was applied under conditions before and after the construction of the estuary dam. The 50-year frequency flood which had 7, 800m$^3$/sec of peak flood was used as the upstream condition, and the spring tide and the neap tide were used as the downstream condition. As the results of the application, no change of the peak flood level was showed in the upper reaches of 19.2km upstream from the estuary dam. For areas near 9.6km upstream from the estuary dam, the change of the peak flood level under the condition before and after the construction was 0. 2m. However considering the assumptions for the boundary conditions of downstream, the change of peak flood level would be decreased.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.79-88
• /
• 2000

The objective of this finite element method study was to analyze the stress distribution induced in a maxillary central incisor Ni-Cr base metal coping ceramic crowns with various margin design. Margin designs of crown in this experiment were knife-edge metal margin on chamfer finishing line of tooth preparation(M1), butt metal margin on shoulder finishing line(M2), reinforced butt metal margin on shoulder finishing line(M3), beveled metal margin on bevelde shoulder finishing line(M4). Two- dimensional finite element models of crown designs were subjected to a simulated biting force of 100N which was forced over porcelain near the lingual incisal edge. Base on plane stress analysis, the maxium von Miss stresses(Mpa) in porcelain venner was 0.432, in metal coping was 0.579, in dentin abutment was 0.324 for M1 model, and M2 model revealed in porcelain was 0.556, in metal coping was 0.511, in dentin was 0.339, and M3 model revealed in porcelain was 0.556, in metal coping was 0.794, in dentin was 0.383 for M4 model. All values of each material in metal-ceramic crown were much below the critical failure values.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1531-1536
• /
• 2006

Microsomal prostaglandin $E_2$ synthase (mPGES-1) is an enzyme that is associated with inflammation, pain, fever and cancer. Hologram quantitative structure activity relationship (HQSAR) was conducted on the series of MK-886 compounds acting as mPGES-1 inhibitors. A training set with 24 compounds was used to establish the HQSAR model. The best model was chosen based on the cross-validated correlation coefficient ($q^2$=0.884) and the correlation coefficient($r^2$=0.976). The model was utilized to predict the activity of the eight-test set of compounds giving the predictive $r^2$ value of 0.845. The descriptors of the model are based on fragment distinction (atoms, bond and connectivity) and fragment size (2-5 atoms). The atomic contribution maps generated from HQSAR were useful in identifying the important structural features responsible for the inhibitory activity of MK-886 inhibitors. Based on the generated model, the presence of hydrophobic biphenyl group seems to enhance inhibition of mPGES-1 that is in agreement with the previous experiments. In addition, it seems important for a halogen to be substituted to the biphenyl ring and for an acyl group to be attached to the indole moiety for enhanced activity.