• Journal of the Korean Magnetics Society
• /
• v.27 no.4
• /
• pp.129-134
• /
• 2017

Bulk-type body-centered-tetragonal Fe-Co alloy was synthesised by utilising a conventional alloy preparation technologies, such as melting, solidification, and homogenising treatments, and its magnetic properties were investigated. In the $(Fe_{100-x}Co_x)_{1-y}C_y$ alloy, the composition range, from which single phase body-centered-tetragonal alloy (martensite phase) was obtained, was severely limited: Co content x = 2.5, and C content y = 0.062. Tetragonality(c/a) of the synthesised body-centered-tetragonal $(Fe_{97.5}Co_{2.5})_{0.938}C_{0.062}$ alloy was 1.05. Magnetocrystalline anisotropy constant ($K_1$) of the body-centered-tetragonal $(Fe_{97.5}Co_{2.5})_{0.938}C_{0.062}$ alloy was measured to be $9.8{\times}10^5J/m^3$), which was 3.1 time as high as the pure iron (${\alpha}-Fe$).

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.105-114
• /
• 2010

This study considers and analyzes the position and area errors and the related problems through the experimental study of the converting process from the cadastral coordinate system to the global coordinate system. Also, based on the result, the points of improvement have been considered. According to the conversion of the coordinates in the study area, the standard deviations for the conversion of coordinates in regard to every parcel boundary point (478 points in total) have been calculated as X=0.0079m and Y=0.0153m respectively. It can be considered that such values are extremely excellent. Also, after analyzing the area errors, it has been found that there is a difference of $0.062m^2$ on average. Such a difference stays within the range of the allowable error tolerance specified by the current laws. Therefore, in regard to the limited area which is subject to the study, it can be concluded that the difference is not great in differences of the position or the area. As a result, the converting process into the global coordinate system is possible.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.545-550
• /
• 2005

We have carried out the fabrications of a barrier layer on a polyethersulfon (PES) film and organic light emitting diode (OLED) based on a plastic substrate by means of atomic layer deposition (ALD). Simultaneous deposition of 30 nm $AlO_x$ film on both sides of the PES film gave a water vapor transition rate (WVTR) of $0.062 g/m^2/day (@38^{\circ}C,\;100%\;R.H.)$. Further, the double layer of 200 nm $SiN_x$ film deposited by plasma enhanced chemical vapor deposition (PECVD) and 20 nm $AlO_x$ film by ALD resulted in a WVTR value lower than the detection limit of MOCON. We have investigated the OLED encapsulation performance of the double layer using the OLED structure of ITO / MTDATA (20 nm) / NPD (40 nm) / AlQ (60 nm) / LiF (1 nm) / Al (75 nm) on a plastic substrate. The preliminary life time to reach 91% of the initial luminance $(1300 cd/m^2)$ was 260 hours for the OLED encapsulated with 100 nm of PECVD-deposited $SiN_x$ and 30 nm of ALD-deposited $AlO_x$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.899-904
• /
• 2014

The atomic structures and electronic properties of six classical and nonclassical $H_2O$@$C_{24}$ fullerene regioisomers are systematically studied using the hybrid density functional B3LYP method and M06-2X method with empirical dispersion in conjunction with the 6-31G(d,p) basis sets. The charge transfer, frontier orbitals, dipole moment, energy gap between the HOMO and LUMO, and volume change of the $C_{24}$ cage are analyzed upon encapsulation of a $H_2O$ molecule in each $C_{24}$ regioisomer. All encapsulation processes are endothermic and the relative stabilities of six $C_{24}$ fullerene regioisomers change upon encapsulation of $H_2O$.

• Journal of Magnetics
• /
• v.14 no.2
• /
• pp.62-65
• /
• 2009

The multiferroic $BiFeO_3$ has been investigated extensively in both thin film and ceramic form. However, the synthesis of a perfect sample with high resistivity is a prerequisite for examining its properties. This paper reports the synthesis of multiferroic $BiFeO_3$ along with its structural, electrical and magnetic properties in ceramic form. Polycrystalline ceramic samples of $BiFeO_3$ were synthesized by solid-state reaction using high purity oxides and carbonates. The formation of a single-phase compound was confirmed by x-ray diffraction and its lattice parameters were determined using a standard computer program. The microstructural studies and density measurement confirmed that the prepared samples were sufficiently dense for an examination of its electrical and magnetic properties. The dc electrical conductivity studies show that the sample was resistive with an activation energy of ${\sim}0.81\;eV$. The magnetization measurement showed a linear ($M{\sim}H$) curve indicating antiferromagnetic characteristics.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.62-68
• /
• 2003

Ba-ferrite particles added with Co and Ti, which were known well the additives for the control in coercivity, were synthesized by sol-gel method. In the range 90 to 120 minute reaction time, a stable sol solution which showed no change with temperature, pH, viscosity and aging time. After dried and heat treatment of sol solution, Ba-ferrite phase formed at $700^{\circ}C$ with Differential Thermal Analysis(DTA) and X-Ray Diffractometer(XRD) measurement. The crystallinity became to be better with increasing the temperature. It were showed by Scanning Electron Microscopy(SEM) that Ba-ferrite increased to particle sizes as increasing heating temperature and obtained of narrow particles size distribution. Also, magnetic characteristics of Ba-ferrite powders Co and Ti added were observed by a Vibrating Sample Magnetometer(VSM). Saturation magnetization$(M_s)$ was not much changed, however. the coercivity$(H_c)$dramatically dropped with addition of Co and Ti.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.2
• /
• pp.96-114
• /
• 2000

춘천 연옥은 색깔에 따라 세가지 유형 (연녹색, 암녹색, 및 회색 연옥)으로 구분되고 이들은 각기 서로 다른 조직과 조성을 나타낸다. 연녹색 연옥이 이중에서 가장 일반적인 유형이다. 연옥은 주로 극미립의 연옥질 투각섬석으로 구성되고 여기에 미량의 휘석, Mg-녹니석 및 방해석이 불순물로서 수반된다. 연옥질 투각섬석 결정들은 그 폭이 5$\mu\textrm{m}$ 이하의 극미립질 침상 결정형을 이루며 서로 치밀하게 얽혀있는 연옥 특유의 조직을 나타낸다. 주사전자현미경 하에서 (110)의 벽개면의 발달이 현저하고, 주사탐침현미경 하에서는 벽개면을 가로지르는 방향으로 특징적인 조선이 나타나는 것이 특징이다. 연옥질 투각섬석은 투과전자현미경 하에서 흔히 단쇄형과 복쇄형이 결합한 3중쇄형 격자가 복쇄형의 투각섬석 구조 내에서 불규칙적으로 협재되는 혼성격자 구조가 발달하는 것이 특징이다. 드물지만 5중쇄형 격자와 4중쇄형 격자도 관찰되는데, 이 같은 불규칙한 격자 혼재상은 회색 연옥에서 보다 현저한 경향을 보인다. 이와 같은 혼성격자 구조형의 존재는 춘천 연옥이 열역학적으로 비평형 상태에서 형성되었음을 시사하는 것으로 여겨진다. 리트벨트법에 의한 구조검증을 통해서 구해진 연옥질 투각섬석들의 격자상수 값들은 X-선회절의 경우, a=9.837(1)~9.9804(4)$\AA$, b=18.046(2)~18.062(1)$\AA$. c=5.2765(7)~5.2803(3)$\AA$, $\beta$=104.717(9)~104.786(3)$^{\circ}$로 계산되었다. 이에 비해서 중성자 회절법에 의해서 측정되 격자 상수 값은 a=9.8841(6)~9.8933(7)$\AA$, b=18.1429(7)~18.161(2)$\AA$, c=5.3024(3)~5.3060(7)$\AA$, $\beta$=104.698(7)~104.771(4)$^{\circ}$로서 X-선회절에 의한 값들과 약간의 차이를 보인다. 연옥질 투각섬석은 Ca에 대한 Mg의 치환에 의해 M(4) 자라의 크기가 작아지면서 b축의 단위포도 함께 줄어드는 결정화학적 특징을 나타낸다. 이는 중성자 회절분석에 의해서 구해진 M(4)의 자리점유율과 M(4)-O의 원자간 거리에 의해서도 확인된다. 그러나 연옥질 투각섬석에 대한 리트벨트법에 구조검증 결과는 연옥의 유형별 미시적 광물상과 혼성격자 구조형의 특징에 별다른 연계성이 없는 것으로 나타났다.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.13-28
• /
• 2003

The purpose of this study was to analyze the kinematic characteristics of Ice hockey slap shot. The subjects of this study were four professional ice hockey players. The reflective markers were attached on the anatomical boundary line of body and the subjects were asked to perform the shot. Ariel Performance Analysis System was used to capture and digitize the shooting image, the data were analyzed by LabView 6i. The results were as fellows. 1. The period of the back swing phase was $0.542{\pm}0.062sec$, the down swing phase was $0.28{\pm}0.056sec$ and the total swing time was $0.825{\pm}0.017sec$ 2. The maximum linear velocity of the stick blade for x direction was shown after 7% of impact, for y, z direction were shown before 2%, 8% of Impact. 3. The maximum velocity of each segment for the left arm was $2.35{\pm}0.05m/s$ in the upper arm, $3.56{\pm}0.34m/s$ in the forearm, $4.75{\pm}0.67m/s$ in the hand. 4. The maximum velocity of each segment for the right arm was $4.67{\pm}0.43m/s$ in the upper arm, $7.22{\pm}0.69m/s$ in the forearm, $9.42{\pm}0.89m/s$ in the hand. 5. The angle of left elbow was generally flexed from the ready stance to the impact and was $82.26{\pm}3.45^{\circ}$ the moment of Impact. 6. The angle of the left shoulder was increased ut the down swing phase and was $78.74{\pm}4.78^{\circ}$ on the moment of impact. 7. The angle of the right shoulder was decreased in the down swing phase and increased before the impact. and the angle was $51.28{\pm}3.54^{\circ}$ on the moment of impact.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.178-181
• /
• 1991

The crystal structure of dehydrated fully $Cd^{2+}$-exchanged zeolite A evacuated at $2{\times}10^{-6}$ Torr and $450^{\circ}C (a = 12.225(2){\AA})$ and of its ethylene sorption complex (a = 12.219(2) ${\AA}$) have been determined by single crystal X-ray diffraction techniques in the cubic space group Pm3m at $21(1)^{\circ}$. The structures were refined to final error indices, $R_1$ = 0.063 and $R_2$ = 0.065 with 266 reflections and $R_1$ = 0.055 and $R_2$ = 0.062 with 260 reflections, respectively, for which $I{\gg}3{\sigma}(I)$. In both structures, six $Cd^{2+}$ ions lie at two distinguished three-fold axes of unit cell. Dehydrated $Cd_6$-A sorbs 4 ethylene molecules per unit cell at $25^{\circ}C$ (vapor pressure of ethylene is ca. 100 Torr). Each $Cd^{2+}$ ion forms a lateral ${pi}$ complex with an ethylene molecule. Four $Cd^{2+}$ ions exist in a nearly tetrahedral environment, 2.210(7)${\AA}$ apart from three framework oxygen ions (considering ethylene molecule as a monodentate ligand) and $2.67(6){\AA}$ from each carbon atom of ethylene molecule.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.511-517
• /
• 1995

Bone scan is a very sensitive diagnostic imaging test for detecting bone and joint disorders. So it might be useful in the diagnosis of temporomandibular disorders of the joint origin. Thus, the effectiveness of bone scan for detecting temporomandibular joint(TMJ) diseases and differentiating the TMJ disc displacement from the TMJ arthritis was evaluated. Bone scan was done in 21 patients with TMJ disc displacement(13 unilaterally affected, 8 bilaterally affected), 25 patients with TMJ arthritis(23 unilateral, 3 bilateral), and 39 volunteers with no signs, symtoms, or history of TMJ disease. TMJ simple uptake rate(SUR) and difference of both TMJ SUR were calculated from the 100,000 count lateral image of head and neck region in 99mTc MDP bone scan. Transcranial and panorama X-ray examination was also done in all patients. TMJ SUR(%) were $1.673{\pm}0.606$ in TMJs affected with arthritis, $1350{\pm}0.351$ in TMJs affected with disc displacement, and $1.084{\pm}0.172$ in TMJs of controls. Significant differences were demonstrated among them(p<0.01) Difference of bith TMJ SUR was highest in patients with unilateral TMJ arthritis($0.608{\pm}$0.533, p<001), and there is no significant difference between that of controls and that of unilateral TMJ dist displacement patients($0.062{\pm}0.063$ vs $0.122{\pm}0.100$). TMJ SUR of Joint with bone change on X-ray finding was not significantly different from that of joint with normal X-ray finding. Those in patients with unilateral TMJ disc displacement(696% and 87% vs 23.1% and 23%). The proportions of patients with increased TMJ SUR and difference of both TMJ SUR(>mean+2SD of controls) in unilateral TMJ arthritis patients were significantly higher than those in patients with unilateral TMJ disc displacement(69.6% and 87% vs 23.1% and 23%). Conclusively, bone scan nay help to detect TMJ disease and differentiate TMJ disc displacement from TMJ arthritis.