• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2126-2132
• /
• 2021

Various research groups and private interprises are pursuing the design of a Molten Salt Reactor (MSR) as one of the Generation-IV concepts. In the current work a fast neutron MSR using chloride fuel is analyzed, specially analyzing the power production and neutron flux level in the Intermediate Heat Exchanger (IHX). The neutronic analysis in this work is based on a chloride-fuel MSR with 600 MW thermal power. The core power density was set to 100 MW m-3 with a core H/D [[EQUATION]] 1.0 amd four Intermediate Heat Exchanger (IHX). This leads to a power of 150 MW per IHX; this power is also comparable to the IHX proposed in the SAMOFAR framework. In this work, a preliminary design of a 150 MW helical-coil IHX for a chloride-fueled MSR is prepared and the fission rate, capture rate, and inelastic scatter rate are evaluated.

• Journal of Microbiology and Biotechnology
• /
• 제29권6호
• /
• pp.897-904
• /
• 2019

Monascus purpureus recombinant mppC and mpp7 knockout strains were subjected to extractive fermentation in the context of azaphilone pigment production. Inclusion of Diaion HP-20 resin resulted in the selective production of unreduced azaphilone congeners, in addition to the early intermediate FK17-P2a, from ${\Delta}mppC$ and ${\Delta}mpp7$ strains that would otherwise mainly produce reduced congeners. Structural determination of two novel unreduced azaphilones from the ${\Delta}mpp7$ strain was accomplished. The unreduced azaphilone compound was converted into the cognate reduced congener in recombinant M. purpureus strains, demonstrating its intermediate role in azaphilone biosynthesis. This study demonstrates the possibility that extractive fermentation with Diaion HP-20 resin can be used to obtain cryptic azaphilone metabolites.

• 한국광학회지
• /
• 제13권6호
• /
• pp.461-466
• /
• 2002

파장분할 다중화 시스템의 다중 채널분리 필터가 측면연마 광섬유 결합기를 이용한 빗살필터로 구현됨을 제안하였다 단일 모드 광섬유의 기본모드와 결합하는 상부 평면 도파로의 모드가 고차일수록 광 전력전달 효율은 낮아지는데, 두 도파로 사이 에 중간 결합층을 삽입함으로서 개선시킬 수 있고 최적화 조건에서 20dB 이상의 채널간 소멸비를 얻을 수 있음을 보였다. 200fm두께의 리튬나오베이트를 상부 평면 도파로로 적용한 경우 4m의 채널간격을 가지는 빗살필터 특성을 얻었으며, 중간 결합층의 두께가 1 Um일 때 굴절률이 1.52-1.53 범위에서 최대 광 전력전달이 일어남을 관측하였고 빔 전파 방법을 이용하여 계산한 결과와 거의 일치함을 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2008

The cross section shape of intermediate die is one of important parameters to obtain dimensional accuracy of final product in shaped drawing process. Until now it has been designed by the experience or trial and error of the expert. In this study, the cross section shape of intermediate die fur spline shape is determined by the electronic field analysis, shape factor method. The result of the electronic field analysis, shape factor method has been compared with that of the present method. The effects of cross section shape on the dimensional accuracy were investigated by using FE analysis. And then the multi-stage shaped drawing experiments were performed to verify the results of FE analysis. As a result, the cross section shape from the electronic field analysis had the good dimensional accuracy. The electronic field analysis can be used for the method to obtain the cross section shape of intermediate die in shaped drawing process.

• 설비공학논문집
• /
• 제17권7호
• /
• pp.620-628
• /
• 2005

The blinds in the intermediate space are installed to block the direct solar radiation. As the blind divide the airflow of intermediate space into two, thermal performance of Double-Skin Facade (DSF) are affected by the blind position. Therefore blind position should be planed with careful consideration in order to maximize the thermal performance of DSF. In this study, CFD was peformed to analyze the effect of blind position in multistory-type DSF in variation of other DSF elements. The simulation results showed that the case with narrow depth of intermediate space and outlet on upper side of outer-facade, it is profitable to place blind as close as possible to the outer-facade. In the other cases, the blind should maintain 0.15 m distance from outer-facade.

• 소성∙가공
• /
• 제17권8호
• /
• pp.627-632
• /
• 2008

The cross sectional shape of intermediate die is one of important parameters to improve dimensional accuracy of final product in shaped drawing process. Until now, it has been designed by the experience or trial and error of the expert. In this study, the cross sectional shape of intermediate die for spline shape is determined by the electric fields analysis and scale factor method. The result of the electric fields analysis and scale factor method have been compared with that of the expert method. The effects of cross sectional shape on the dimensional accuracy were investigated by using FE-simulation. And then the multi-stage shaped drawing experiments were performed to verify the results of FE-simulation. As a result, the cross sectional shape from the electric fields analysis and scale factor method had the good dimensional accuracy. These two methods can be used for the method to obtain the cross sectional shape of intermediate die in shaped drawing process.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권2호
• /
• pp.57-65
• /
• 2006

The blinds in the intermediate space are installed to block the direct solar radiation. As the blind divides the airflow of intermediate space into two parts, thermal performance of Double-Skin Facade(DSF) is affected by the blind position. Therefore the blind position should be planned with careful consideration in order to maximize the thermal performance of DSF. In this study, CFD was performed to analyze the effect of blind position in multistory-type DSF in variation of other DSF elements. The simulation results showed that the case with narrow depth of intermediate space and outlet on upper side of outer-facade, it is profitable to place blind as close as possible to the outer facade. In the other cases, the blind should maintain 0.15m distance from outer facade.

• 센서학회지
• /
• 제28권4호
• /
• pp.240-245
• /
• 2019

Phase interpolation is widely adopted in frequency synthesizers and clock-and-data recovery systems to produce an intermediate phase from two existing phases. The intermediate phase is typically generated by combining two input phases with different weights. Unfortunately, this results in non-uniform phase steps. Alternatively, the intermediate phase can be generated by successive approximation, where the interpolated phase at each approximation stage is obtained using the same weight for the two intermediate phases. As a proof of concept, this study presents a 2-GHz 8-bit successive approximation digital-to-phase converter that is designed using 65-nm CMOS technology. The converter receives an 8-phase clock signal as input, and the most significant bit (MSB) section selects four phases to create two sinusoidal waveforms using a harmonic rejection filter. The remaining least significant bit (LSB) section applies the successive approximation to generate the required intermediate phase. Monte-Carlo simulations show that the proposed converter exhibits 0.46-LSB integral nonlinearity and 0.31-LSB differential nonlinearity with a power consumption of 3.12 mW from a 1.2-V supply voltage.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.339-347
• /
• 2016

스웨덴 포쉬마크 (Forsmark)지역에서는 1988년부터 세계 최초의 동굴식 중저준위 방사성 폐기물 처분장(SFR1)이 운영되고 있다. 4개의 터널 및 1개의 사일로에 용량 $63,000m^3$의 처분공간이 확보되어 연간 $1,000m^3$의 폐기물을 처분할 수 있었지만, 스웨덴 내 12기 중 10기의 원자로의 수명이 연장되고, 나머지 2기의 원자로가 폐쇄되어 추가 폐기물 처분에 대한 요구가 발생하게 되었다. 따라서 6기의 수평터널을 추가로 건설하여 폐기물과 9개의 반응로 용기 처분을 위한 $108,000m^3$의 처분 공간을 확보할 계획으로 스웨덴 방사성폐기물 관리주식회사(SKB)는 SFR3으로의 확장을 위한 허가 신청서를 2014년 정부에 제출하였다. 본 연구에서는 SFR3의 추가 확장 계획에 대해 소개하고, SFR3의 계획 시에 고려된 지질학적, 암반공학 및 암반수리학적인 요소들을 소개하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권3호
• /
• pp.215-218
• /
• 2000

Sialytrisaccharides based on $\beta$-galactosyldisaccharides were synthesized using $\beta$-galactosidase and trans-sialidase in one pot. Using $\beta$-galactosidase from Bacillus Ciculans and trans-sialidase from Trypanosoma cruzi simulaneously, 6mM sialyltrisaccharides composed of about 95% NeuAc$\alpha$(2,3)Gal$\beta$(1,4)GlcNAc and 5% NeuAc$\alpha$(2,3)Gal$\beta$(1,6)GlcNAc were produced from a reaction mixture containing 25mM o-nitropheny1-$\beta$-D-galsctolneuraminic acid. One beauty of this reaction was that a secondary hydrolysis of the disaccharide intermediate occurring between the activated galactopyranoside and N-acetylgucosamine was prevented. Using $\beta$-galactosidase from Escherichia cloi and the same trans-sialidase, 15mM sialyltrisaccharides composed of about 90% NeuAc$\alpha$(2,3)Gal$\beta$(1,6)GlcNac and 10% NeuAc$\alpha$(2,3)Gal$\beta$(1,4)GlcNAc were produced from a reaction misture containing 400nM galactose, 800nM N-acetylglucosylation rection between galactose and N-actylgucosamine was diminant since the disaccharide intermediate mainly resulted sreulted in the silylated product.