DOI QR코드

DOI QR Code

Design and neutronic analysis of the intermediate heat exchanger of a fast-spectrum molten salt reactor

  • Terbish, Jamiyansuren (Nuclear Research Center, National University of Mongolia) ;
  • van Rooijen, W.F.G. (Research Institute of Nuclear Engineering, University of Fukui)
  • Received : 2020.09.17
  • Accepted : 2021.01.22
  • Published : 2021.07.25

Abstract

Various research groups and private interprises are pursuing the design of a Molten Salt Reactor (MSR) as one of the Generation-IV concepts. In the current work a fast neutron MSR using chloride fuel is analyzed, specially analyzing the power production and neutron flux level in the Intermediate Heat Exchanger (IHX). The neutronic analysis in this work is based on a chloride-fuel MSR with 600 MW thermal power. The core power density was set to 100 MW m-3 with a core H/D [[EQUATION]] 1.0 amd four Intermediate Heat Exchanger (IHX). This leads to a power of 150 MW per IHX; this power is also comparable to the IHX proposed in the SAMOFAR framework. In this work, a preliminary design of a 150 MW helical-coil IHX for a chloride-fueled MSR is prepared and the fission rate, capture rate, and inelastic scatter rate are evaluated.

Keywords

Acknowledgement

This work was sponsored by the FIHRDC/WERC Accepting Program for Overseas Researchers/Research Students of Atomic Energy JFY2019, of the Wakasa-Wan Energy Research Center, Fukui, Japan, and the Mongolian Foundation for Science and Technology (MEST) 2018/45 project, Ulaanbaatar, Mongolia.

References

  1. Ondrej Benes, Thermodynamics of Molten Salts for Nuclear Applications, PhD thesis, Institute of Chemical Technology Prague, 2008. URL, https://publications.jrc.ec.europa.eu/repository/bitstream/JRC50490/ReqNo_JRC50490_Benes.pdf.
  2. Suddhasattwa Ghosh, B. Prabhakara Reddy, K. Nagarajan, K.C. Hari Kumar, Experimental investigations and thermodynamic modelling of KCl-LiCl-UCL3 system, CAL 45 (2014) 11-26, https://doi.org/10.1016/j.calphad.2013.11.001.
  3. Mariya Brovchenko, Jan-Leen Kloosterman, Lelio Luzzi, Elsa Merle, Daniel Heuer, Axel Laureau, Olga Feynberg, Victor Ignatiev, Manuele Aufiero, Antonio Cammi, Carlo Fiorina, Fabio Alcaro, Sandra Dulla, Piero Ravetto, Lodewijk Frima, Danny Lathouwers, Merk Bruno, Neutronic benchmark of the molten salt fast reactor in the frame of the EVOL and MARS collaborative projects, EPJ Nuclear Science and Technologies 5 (2) (2019), https://doi.org/10.1051/epjn/2018052.
  4. Delphine Gerardin, Anna Chiara Uggenti, St ephane Beils, Andrea Carpignano, Sandra Dulla, Elsa Merle, Daniel Heuer, Axel Laureau, Michel Allibert, A methodology for the identification of the postulated initiating events of the molten salt fast reactor, Nuclear Engineering and Technology 51 (4) (2019) 1024-1031, https://doi.org/10.1016/j.net.2019.01.009.
  5. Andrea Di Ronco, Antonio Cammi, Stefano Lorenzi, Preliminary analysis and design of the heat exchangers for the molten salt fast reactor, Nuclear Engineering and Technology 52 (2020) 51-58, https://doi.org/10.1016/j.net.2019.07.013.
  6. Guangxuan Lu, Christian Robelin, Patrice Chartrand, Maogang He, Kun Wang, Thermodynamic evaluation and optimization of the (LiCl + NaCl + KCl + MgCl2 + CaCl2 + CeCl3) system, Fluid Phase Equil. 487 (2019) 83-97, https://doi.org/10.1016/j.fluid.2018.11.031.
  7. George J. Janz, Molten Salts Handbook, Academic Press, 1967.
  8. Toni Y. Karlsson, Guy L. Fredrickson, Tae-Sic Yoo, DeeEarl Vaden, Michael N. Patterson, Vivek Utgikar, Thermal analysis of projected molten salt compositions during FFTF and EBR-II used nuclear fuel processing, J. Nucl. Mater. 520 (2019) 87-95, https://doi.org/10.1016/j.jnucmat.2019.04.016.
  9. B. Cliff, Davis. Implementation of Molten Salt Properties into RELAP5-3D/ATHENA. Technical Report INEEL/EXT-05-02658, Idaho National Engineering and Environmental Laboratory, January 2005. URL, https://inldigitallibrary.inl.gov/sites/STI/STI/3028316.pdf.
  10. R. Serrano-Lopez, J. Fradera, S. Cuesta-Lopez, Molten salts database for energy applications, Chem. Eng. Process: Process Intensification 73 (2013) 87-102, https://doi.org/10.1016/j.cep.2013.07.008.
  11. Theodore L. Bergman, Adrienne S. Lavine, Frank P. Incropera, David P. Dewitt, Fundamentals of Heat and Mass Transfer, seventh ed. edition, John Wiley and Sons, 2011.
  12. Salzgitter Mannesmann Precision, Cold drawn seamless heat exchanger tubes for process industries, Available online, Accessed in 2020. URL, https://www.mannesmann-precision-tubes.com/img/Downloads_Prospekte_2011/SMP_Heat_Exchanger_Tubes.pdf.
  13. A. Zukauskas, Heat transfer from tubes in crossflow, Adv. Heat Tran. 8 (1972) 93-160, https://doi.org/10.1016/S0065-2717(08)70038-8.
  14. D. Plisson-Rieunier, Description of the ERANOS 2.3N Release. Technical Report DER/SPRC/LEDC 13-419 IND A, CEA, 2013.
  15. Y. Nagaya, K. Okumura, T. Mori, et al., MVP/GMVP Version 3: General Purpose Monte Carlo Code for Neutron and Photon Transport Calculations Based on Continuous Energy and Multigroup Methods. JAEA-Data/Code 2016-018, Japan Atomic Energy Agency, 2017.
  16. K. Shibata, O. Iwamoto, T. Nakagawa, et al., JENDL-4.0: A New Library for Nuclear Science and Engineering, 2011.