• Journal of Preventive Medicine and Public Health
• /
• 제27권4호
• /
• pp.735-745
• /
• 1994

The incidence data (1991. 7. 1$\sim$1992. 6. 30) from the Implementation Study of Seoul Cancer Registry (ISSCR) were evaluated in terms of its completeness and validity. Two indicators for the completeness, Mortality/Incidence ratio (M/I ratio) and Age-specific Incidence Curve, showed fairy good registration throughout the age-sex specific strata, except the strata aged over 75 years old. The strata had very high M/I ratio (over 100%) and decreasing pattern of incidence, which suggested incomplete registration of cancer in this group. The active surveillance by a ISSCR staff improved the registration rate especially among elderlies. From the site specific M/I ratio, we found that liver cancer had oddly high M/I ratio. Since this high M/I ratio of liver cancer appears consistently in other reliable cancer registries, it is more like to be due to the high fatality of it rather than incomplete registration. The validity of the incidence data was assessed by three indicators; Histological Verification (HV%), Primary Site Unknown (PSU%), and Age Unknown (Age UNK%). The average HV% were 77% for men and 85% for women, which were slightly lower than those of other reliable cancer registries. This low HV% might be due to the considerable size of relative frequency of liver cancer in Korea, regarding the fact that the diagnosis of liver cancer is made mostly by non-biopsical radiologic methods (CT, Ultrasono, Angiography, MRI etc.). The level of PSU% and Age UNK% were in acceptable range, but not low enough, especially in terms of Age UNK%. Although ISSCR data had acceptable quality in general, it is needed to have more hospitals participate in the registry surveillance, to make registery data merged with death certificate data regulary, and educate the registration stans to be more competent and dedicated.

• 소성∙가공
• /
• 제28권6호
• /
• pp.354-360
• /
• 2019

The plastic strain ratio is one of the factors that affect the deep drawability of metal sheets. The plastic strain ratio of fully annealed Cu sheet is low because its texture has {001}<100>. In order to improve the deep drawability of Cu sheet, it is necessary to increase the plastic strain ratio of Cu sheet. This study investigate the increase of plastic strain ratio of a Cu sheet after the first asymmetry rolling and annealing, and the second asymmetry rolling and annealing in air and Ar gas conditions. The average plastic strain ratio (R_m) was 0.951 and |ΔR| value was 1.27 in the initial Cu sheet. After the second 30.1% asymmetric rolling and annealing of Cu sheet at 1000℃ in air condition, the average plastic strain ratio (R_m) was 1.03 times higher. However, |ΔR| was 0.12 times lower than that of the initial specimen. After the second 18.8% asymmetric rolling and annealing of Cu sheet at 630℃ in Ar gas condition, the average plastic strain ratio (R_m) was 1.68 times higher and |ΔR| was 0.82 times lower than that of the initial specimen. These results are attributed to the change of the texture of Cu sheet due to the different annealing conditions.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• 보험의학회지
• /
• 제3권1호
• /
• pp.103-141
• /
• 1986

The present study was undertaken to establish the decision standard of builds for the insured by using the ratio of weight-for-height as build index. Materials being examined were the ratio of weight-for-height being calculated from the actually measured heights and weights of a total of 15,838 insured persons who were examined medically at Honam Medical Department of Dong Bang Life Insurance Company, Ltd. from June, 1979 to September, 1985. The ratio of weight-for-height is calculated by the following formula. The ratio of weight-for-height(%)=$\frac{weight(kg){\times}100}{\{height(cm)-100\}{\times}0.9(kg)$ The results were as follows: 1. The distribution of the ratio of weight. for-height of the 15,838 insureds follows Log normal distribution being skewed to the left(the direction of underweight). 2. The ratio of weight-for-height were Log transformed to lead to a sym metrical pattern of distribution in which statistical rules are known to be applied more exactly. Thereafter, the establishment of dicision standard of builds was undertaken by using the log of the ratio of weight-for-height as build index. Through all ages in male, the ratio of weight-for-height indicating the range of standard lives including slight overweighted and underweighted lives besides normal lives is 80-130%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$ ; in female, 85-135%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$. Through all ages in male, the ratio of weight-for-height indicating the initial level of super-overweighted and super-underweighted lives is 130-150% and 75-80%,and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40% and M-25% respectively;in female, 140-160% and 75-80%, and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40%-+50% and M-25% respectively. 3. Author's rating table model for builds(a table of weight per height) is proposed. On the table, the ratings for builds, i. e. standard, super-weighted and super-underweighted lives, are listed.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.208-213
• /
• 2011

본 논문은 안전 서비스를 제공하는 Global Positioning System(GPS) 보호 비(Ratio of Interference to Noise: I/N) 도출을 위해 Ultra Wide Band(UWB)로부터 GPS 간섭 영향을 분석하였다. GPS 측위 오차 2.5 m 이하를 만족하기 위한 UWB 송신기와 GPS 수신기 사이의 최소 보호 거리를 산출하였고, 최소 결합 손실 방법(Minimum Coupling Loss: MCL)을 이용하여 측위 오차를 만족하는 UWB 송신기와 GPS 수신기 사이의 보호 거리 값에 근거하여 GPS 시스템의 보호비(I/N)를 도출하였다. 그 결과, 측위 오차 2.5 m 이하를 만족하기 위한 GPS 보호 거리는 10 m 이상으로 계산되었고, 이를 만족하기 위한 GPS 보호비(I/N)는 -20 dB 이하로 도출되었다. 제안된 GPS 시스템 보호비는 국제전기통신연합(ITU-R)에서 제안한 GPS 시스템 중 안전 서비스에 해당하는 보호비(I/N)를 만족시킴을 확인하였다. 또한, 본 논문을 통해 얻어진 GPS 보호 비의 결과는 안정적인 국내 GPS 시스템 운용을 위한 기준으로 이용될 수 있다.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.341-350
• /
• 2007

본 논문에서는 주파수 조정의 상세 계획에 적용할 목적으로 M/W 중계망의 보호비 유도를 새로이 제안하였으며, 실제 시스템 및 주파수에 대해 동일 및 인접 채널 보호비의 계산 결과를 제시하였다. 가용율 예측에 근거한 제시된 방법은 합성 페이드 마진, 간섭-대-잡음의 비(I/N), 통합 필터 변별도, 시스템 변수로 나타낸 것이다. 계산 결과에 의하면 6.7 GHz, 60 km, 64-QAM, I/N=-6 dB, $BER=10^{-6}$에서 합성 페이드 마진 및 동일 채널 보호비는 각각 25.5 및 50.7 dB을 갖는다. 또한 40 MHz 인접 채널에 대해 통합 필터 변별도 및 인접 채널 보호비는 26.3 및 24.4 dB을 얻는다. 제안된 방법은 M/W 중계망의 보호비 도출에 있어 보다 상세하고 다양한 장치의 변수를 고려한 확장의 용이성 및 실용성 측면에서 이점을 갖는다.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.446-454
• /
• 2005

An economic treatment method to remove oxidized nitrogen from wastewater is biological denitrification with organic matters. Several organics can be used, however, methanol is commonly used. When methanol is provided, M:N (Methanol to Nitrogen) ratio is used to define methanol demand for denitrification. In this study, two artificial wastewaters were provided to a biological system to evaluate denitrification performance. Differences of influent total CODcr from effluent soluble CODcr were converted to methanol equivalent and oxidized nitrogen difference between influent and effluent were converted to nitrate equivalent to define M:N ratios. Modes I, II, III, I-1 and IV showed 5.1, 2.7, 3.3, 2.3 and 2.6 of M:N ratios, respectively. Since denitrifying microorganisms had to build a new metabolic system for methanol and influent organics, initial operation mode, Mode I, required more methanol and this resulted in high M:N ratios compared with later operation mode, Mode I-1. Salt in influent did not show inhibitory effects on denitrfication, although this was believed to increase effluent SS and soluble CODcr concentrations in Mode III, I-1 and IV, respectively. The concentrations of effluent soluble $COD_{Mn}$ did not changed much with influent salt.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.87-98
• /
• 1995

When the crack in orthotropic material is propagating under dynamic model I load, influences of anisotropic property ratio $E_{L}$/ $E_{T}$ on stress and displacement around propagating crack tip are studied in this paper. When M<0.55 and .alpha.=90.deg.(.alpha.; the angle of fiber direction with crack propagating direction, M; crack propagation velocity/shear stress wave velocity), the influence of $E_{L}$/ $E_{T}$ on stress .sigma.$_{x}$, .sigma.$_{y}$, .tau.$_{xy}$ and .sigma.$_{\theta}$ is the greast on .sigma.$_{y}$. Except M<0.55 and .alpha.=90.deg., it is the greast on .sigma.$_{x}$ in any situation. Increasing $E_{L}$/ $E_{T}$, stress components are increased or decreased. When maximum stress is based, the stress .sigma.$_{x}$(.alpha.=90.deg.), .sigma.$_{y}$(.alpha.=0.deg.) and .tau.$_{xy}$ (.alpha.=90.deg.) are decreased with increment of $E_{L}$/ $E_{T}$ in M=0. any stresses except .sigma.$_{*}$x/(.alpha.=0.deg.) are decreased with increment of $E_{L}$/ $E_{T}$ in M=0.9. When .alpha.=90.deg., the influence of $E_{L}$/ $E_{T}$ on displacement U and V is V>U in any velocities of crack propagation, when .alpha.=0.deg., it is VU in M>0.75 and when $E_{L}$/ $E_{T}$ is increased, U and V are decreased in any conditions.sed in any conditions.tions.tions.tions.