• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.652-656
• /
• 2003

녹색발광을 하는 스피넬 구조의 ZnGa$_2$O$_4$:Mn 형광체박막을 산소분압비를 증착변수로 이용하여 rf 마그네트론 스퍼터링법으로 증착하였으며, 증착된 박막을 산화, 진공+질소 분위기에서 각각 열처리를 하였다. 증착시 산소분압비 및 열처리시 산소분위기가 형광체 박막의 성장 및 발광특성에 미치는 영향을 관찰하였다. 열처리시 박막의 산화를 막을수록 발광특성이 향상되는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1708-1710
• /
• 1998

In this study, several experiment is executed to analyze properties of Electrodeless Discharge Lamp using H-Discharge. 1. The operating frequency of this lamp is $2.45{\sim}2.65$[MHz] 2. The color of light is mild-white. And, it is shifted in the direction of red in low temperature. 3. In ambient temperature under $10^{\circ}C$, luminous efficiency is decreased precipitously. Therefore, research for improvement discharge-characteristic in low temperature need. 4. Discharge-characteristic stable between $160{\sim}240$[V]. And, luminous output is inverse proportion to coil-voltage. 5. When input-voltage is decreased continuously unstable section exist.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.88-91
• /
• 2001

The mechanical properties and surface luminous intensities of copper foil have been studied with variation of the amount of additives into the electrolyte. Especially, organic compound of HEC was added from 0.1 to 10ppm for the propose of increasing the mechanical property and the surface state. The total thickness of electrodeposited copper foil was decreased with increasing the amount of organic compounds. There was not so much significant effect of the current density. It has been observed that mechanical property and surface luminous intensity increase with increasing concentration of organic compounds.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.49.1-49
• /
• 2000

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.111-111
• /
• 1999

• 세라미스트
• /
• 제21권1호
• /
• pp.80-97
• /
• 2018

To realize a high luminous efficacy and a high emission color purity for the white-LEDs, the understanding for luminescence properties of the phosphors is significantly important because the performance of white-LEDs is directly affected by the luminescence properties of the phosphors. In this paper, therefore, we reviewed some commercially available $Eu^{2+}$- and $Ce^{3+}$- activated phosphors and discussed for the luminescence properties of these phosphors.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.177-179
• /
• 2009

In order to investigate the possible application of ZnO films as a transparent conducting oxide (TCO) electrode, ZnO:Al films were prepared by RF magnetron sputtering method. The effects of surface treatment and doping concentration on the structural and electrical properties of ZnO films were mainly studied experimentally. Five-inch PDP cells using either a ZnO:Al or indium tin oxide (ITO) electrode were also fabricated separately under the same manufacturing conditions. The luminous properties of both the transparent conducting oxide electrode were measured and compared with each other. By doping the ZnO target with 2 wt% of Al2O3, the film deposited at a chemical surface treatment resulted in the minimum resistivity of 8.5 _ 10_4 U-cm and a transmittance of 91.7%. And DBD surface treatment resulted in the minimum resistivity of 8.5 _ 10_4 U-cm and a transmittance of 91.7%. Although the luminance and luminous efficiency of the transparent conducting oxide electrode using ZnO:AI are lower than those of the cell with the ITO electrode by about 10%, these values are sufficient enough to be considered for the normal operation of TCO.

• 한국안광학회지
• /
• 제6권2호
• /
• pp.37-46
• /
• 2001

본 연구에서는 착색 염료를 이용하여 염료의 혼색 비율과 착색 시간을 다양하게 하여 프라스틱렌즈를 착색하고 이 착색렌즈의 UV-Vis-IR 영역의 분광투과율과 색상의 변화를 측정하였다. 이 자료를 바탕으로 착색시간의 로그함수에 직선적 관계를 갖는 착색시간에 따른 파장별 분광투과율의 변화로부터 얻은 직선의 기울기를 스팩트럼합성에 이용하였으며 실험식을 만들어 실측치와의 일치여부를 검증한 결과 실험을 행하지 않고서도 transmittance와 color에 대한 ANSI Z80.3규정에의 부합여부를 용이하게 계측할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.539-544
• /
• 2010

We have synthesized new blue electroluminescent polyalkylfluorene-based copolymers [poly(F-co-Py)x:y, where x:y = 99:1 or 95:5 mole ratios] containing the hole-injecting pyrazole derivative [3,3'-(4,6-bis(octyloxy)-1,3-phenylene)bis(1,5-diphenyl-4,5-dihydro-1H-pyrazole] through Ni(0) mediated polymerization, and their electroluminescent properties were investigated. Electroluminescent (EL) devices were fabricated with ITO / PEDOT:PSS (110 nm) / copolymers or PF homopolymer (80 nm) / Ca (50 nm) / Al (200 nm) configuration. Each EL device constructed from the copolymer exhibited significantly enhanced brightness and efficiency compared with a device constructed from the PF homopolymer. The EL device constructed with poly(F-co-Py)99:1 exhibited the highest luminous efficiency and brightness (0.95 cd/A and $2,907\;cd/m^2$, respectively). The achieved luminous efficiency was an excellent result, providing almost a 4-fold improvement on the efficiency obtainable with the a PF homopolymer device. This enhanced efficiency of the copolymer devices results from their improved hole injection and more efficient charge carrier balance, which arises from the HOMO level (~5.83 eV) of the poly(F-co-Py)99:1 copolymer, which is higher than that of the PF homopolyme (~5.90 eV).

• 천문학회보
• /
• 제40권1호
• /
• pp.43.2-43.2
• /
• 2015

The massive limit of black holes (BHs) is observed as present day ten billion solar masses. We search for observational signatures of BHs that become extremely massive (EMBHs, 1-10 billion solar masses). I will report on the evolution of active galactic nuclei (AGNs) through the growth of BH mass and their dust emission strength. First, we measured 26 EMBH masses of quasars at 1