• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1488-1494
• /
• 2008

This paper is to design and implement a low power noncoherent BFSK receiver intended for future deep space communication using Xilinx System generator. The receiver incorporates a 16 point Fast Fourier Transform(FFT) for symbol detection. The design units of the receiver are digital design for better efficiency and reliability. The receiver functions on one bit data processing and supports main data rate 10kbps. In addition CORDIC algorithm is used for avoiding complex multiplications while computing FFT and multiplication of twiddle factor for low power is substituted by rotators. The design and simulation of the receiver is carried out in Simulink then the Simulink model is translated to the hardware model to implement FPGA using Xilinx System Generator and to verify performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1451-1459
• /
• 2004

In this paper, a low-power 32-point IMDCT structure is proposed for MP3. Through re-odering of IMDCT matrices, we propose the systolic structure operating with 16, 8, 4, 2, and 1 cycle, respectively. To reduce power consumption, multiplication of each sub blocks are implemented by add and shift operation with CSD(Canrmic sigled digit) form coefficients. To reduce, furthermore, the number of adders, we utilize the common sub-expression sharing techniques. With these techniques, the relative power consumption of the proposed structure is reduced by 58.4% comparison to the conventional structure using only 2's complement form coefficient. Validity of the proposed structure is proved through Verilog-HDL coding.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.671-678
• /
• 2022

Approximate computing is an computational technique that is acceptable degree of inaccurate results of accurate results. Approximate multiplication is one of the approximate computing methods for high-performance and low-power computing. In this paper, we propose a high-density, low-power, and high-speed approximate multiplier using approximate 4-2 compressor and improved full adder. The approximate multiplier with approximate 4-2 compressor consists of three regions of the exact, approximate and constant correction regions, and we compared them by adjusting the size of region by applying an efficient partial product reduction. The proposed approximate multiplier was designed with Verilog HDL and was analyzed for area, power and delay time using Synopsys Design Compiler (DC) on a 25nm CMOS process. As a result of the experiment, the proposed multiplier reduced area by 10.47%, power by 26.11%, and delay time by 13% compared to the conventional approximate multiplier.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.206-209
• /
• 2003

The purpose of AR and HR coating is acquire the very low reflection rate and the high reflection rate through the deposition of a thin film using the refraction ofmaterial. Basically if the high refractive material and the low refractive material are chosen and the condition for the experiment is determined, then we solve theproject with the optical design and multi thin film coating. First of all, we choose $SiO_2$for the low refractive material and $TiO_2$ for the high refractive material and apply Sputtering System easy to control the refraction rate and excellent in reconstruction to the equipment of thin film multiplication. For the control of the refraction rate and growth rate we modify RF Power and the ratio of Gas(Ar:O2), And we use Ellipsometer for estimation and analysis of the refraction rate and growth rate and AFM&SEM for the analysis of surface and component.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1275-1277
• /
• 1995

We designed and constructed an extremly high power s-band traveling wave resonator for the test of high power microwave components using 80MW pulsed klystron with $4{\mu}s$ pulse width. The 10dB directional coupler for the input power coupling was used, and the ring consists of phase shifter, tuner, H-band, and other microwave components. The designed total electrical length of the system is 10 times of the waveguide wavelength, ${\lambda}_g$=15.3cm, and the measured total insertion loss is 0.15dB. The low power test measurment showed the power multiplication of 14.69. The design goal is to achieve the peak power of 300MW, pulse width $4{\mu}s$ with 30 pulse repetition rate. In this article we discuss the treveling wave resonant ring constructed at the PAL laboratory together with the test results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.24-31
• /
• 2010

A receiver architecture with low complexity for chirp spread spectrum (CSS) of IEEE 802.15.4a is proposed. To demodulate the received signal at the highest signal to noise power ratio, matched filter is generally adopted for the receiver of wireless communication systems. It is, however, not resonable to adjust the matched filter to the receiver of CSS whose objectives are low complexity, low cost and low power consumption since complexity of the matched filter is high. In this paper, we propose a new receiver architecture using differential multiplication and accumulator not matched filter for demodulation. Also, bi-orthogonal decoder implemented by only adder/subtractor is proposed. The hardware resources for implementation are reduced in the proposed receiver architecture, although bit error rate performance is low compared with the receiver architecture based on the matched filter.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.531-536
• /
• 2021

As artificial intelligence technology advances, it is being applied to various application fields. Artificial intelligence is performing well in the field of image recognition and classification. Chip design specialized in this field is also actively being studied. Artificial intelligence-specific chips are designed to provide optimal performance for the applications. At the design task, memory component optimization is becoming an important issue. In this study, the optimal algorithm for the memory size exploration is presented, and the optimal memory size is becoming as a important factor in providing a proper design that meets the requirements of performance, cost, and power consumption.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.115-124
• /
• 2004

This paper proposes a high efficient and low power FIR filter chip for partial-response maximum likelihood (PRML) disk drive read channels; it is a 6-bit, 8-tap digital FIR filter. The proposed filter employs a parallel processing architecture and consists of 4 pipeline stages. It uses the modified Booth algorithm for multiplication and compressor logic for addition. CMOS pass-transistor logic is used for low power consumption and single-rail logic is used to reduce the chip area. The proposed filter is actually implemented and the chip dissipates 120mV at 100MHz, uses a 3.3V power supply and occupies 1.88 ${\times}$ 1.38 $\textrm{mm}^2$. The implemented filter requires approximately 11.7% less power compared with the existing architectures that use the similar technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.621-628
• /
• 2017

The efficiency of implementation of the arithmetic operations in finite fields depends on the choice representation of elements of the field. It seems that from this point of view normal bases are the most appropriate, since raising to the power 2 in $GF(2^n)$ of characteristic 2 is reduced in these bases to a cyclic shift of the coordinates. We, in this paper, introduce our algorithm to transform fastly the conventional bases to normal bases and present the result of H/W implementation using the algorithm. We also propose our algorithm to calculate the multiplication and inverse of elements with respect to normal bases in $GF(2^n)$ and present the programs and the results of H/W implementations using the algorithm.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.9-15
• /
• 2003

An optimized finite-field multiplier is proposed for encryption and error correction devices. It is based on a modified Linear Feedback Shift Register (LFSR) which has lower power consumption and smaller area than prior LFSR-based finite-field multipliers. The proposed finite field multiplier for GF(2n) multiplies two n-bit polynomials using polynomial basis to produce $z(x)=a(x)^*b(x)$ mod p(x), where p(x) is a irreducible polynomial for the Galois Field. The LFSR based on a serial multiplication structure has less complex circuits than array structures and hybrid structures. It is efficient to use the LFSR structure for systems with limited area and power consumption. The prior finite-field multipliers need 3${\cdot}$m flip-flops for multiplication of m-bit polynomials. Consequently, they need 6${\cdot}$m latches because one flip-flop consists of two latches. The proposed finite-field multiplier requires only 4${\cdot}$m latches for m-bit multiplication, which results in 1/3 smaller area than the prior finite-field multipliers. As a result, it can be used effectively in encryption and error correction devices with low-power consumption and small area.