• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1123-1126
• /
• 1999

In this paper, we propose a real-time implementation of the MPEG-1 layer III and MPEG-2 layer III LSF audio decoding system based on OAK DSP Core. In order to solve the problem of resolution, the system has been used floating-point operation and double precision in dequantization module. The size of ROM is reduced by using the Run-length algorithm of reordered index. The subband synthesis filter module is optimized to have low computational complexity in terms of the size of ROM or RAM. To construct a efficient system, we used both the DSP Core and Parser-Huffman decoder which is implemented with VHDL.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.178-181
• /
• 2005

Silicon oxynitride (SiON) 막은 플라즈마 화학기상증착법(PECVD)으로 $SiH_4,\;N_2O$와 $N_2$ 가스를 사용하여 $SiO_2/Si$ 위해 증착되었다. 증착 변수에 따라서 SiON 막의 굴절률은 prism coupler를 사용하여 1552nm 파장에서 $1.4480\~1.4958$까지 변화하였다. 평판 광도파로 코어로 사용되는 SiON 막의 두께는 $6{\mu}m$이고, buffer 막과의 굴절률 차이(An)는 $0.36\%$이다. 또한 식각 공정으로 $SiO_2$ 막 위에 증착된 SiON 막은 건식식각을 통해서 수행되었다. 광화이버에 $1.55{\mu}m$ 파장의 레이저론 입력단에 조사하였다. 결과적으로 저굴절률 차이 SiON 광도파로를 제작하였으며, 출력단에서 single-mode 형상을 확인하였다.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.369-376
• /
• 2009

Cowpea might have been introduced from China to Korea and cultivated for several hundred years but it has never been a staple food crop in Korea. In this study, genetic diversity of 492 Korean cowpea landrace accessions that have passport information was estimated using six SSR markers. The mean of Weir's gene diversity was 0.665 from all accessions investigated in the study. Cowpea gene diversity of six local provinces in Korea was ranged from 0.370 in accessions of Gangwon to 0.680 in Jeonra provinces. Low gene diversity of the cowpea genepool of Gangwon province was probably derived from relatively few introductions. Especially SSR markers VM36 and VM39 seem to be good markers to distinguish the Gangwon accessions from others by occurring at a specific locus with higher than 78% of allele frequency. Except for the Gangwon province with the low genetic diversity, gene diversity of cowpea accessions from other provinces was ranged from 0.600 to 0.680 indicating no big differences among provinces. Distribution pattern of the allele frequencies was similar among the other provinces. This may reveal that Korean farmers might exchange cowpea seeds easily with even their neighbors with geographical barriers. A core collection, 100 landraces, ca. 20% of base collection, was developed at the 70% of a similarity coefficient level using random sampling approaches after stratification of the entire landrace collection based on the phenetic dendrogram. The variability of SSR in the base and core collections of Korean cowpea landrace was compared by calculating Weir's gene diversity. The mean of Weir's gene diversity of the core was 0.707 while that of the base collection was 0.665. The higher diversity index in the core collection indicates that it maintains the initial variability and well represents the base collection. The core collection included one of determinate accession (IT 216155) and two of no branching type accessions (IT 103959 and IT 161024). The core collection could be used to guide more efficient management and utilization of the entire collection. This core collection should be revised periodically as additional accessions are collected and further characterization is conducted.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.385-397
• /
• 2023

This study presents an experiment and analysis to compare the seismic behavior of full-scale reinforced concrete beam-column joint strengthened by prestressed steel strips, externally bonded steel plate, and CFRP sheets. For experimental investigation, five specimens, including one joint without any retrofitting, one joint retrofitted by externally bonded steel plate, one joint retrofitted by CFRP sheets, and two joints retrofitted by prestressed steel strips, were tested under cyclic-reserve loading. The failure mode, strain response, shear deformation, hysteresis behavior, energy dissipation capacity, stiffness degradation and damage indexes of all specimens were analyzed according to experimental study. It was found that prestressed steel strips, steel plate and CFRP sheets improved shear resistance, energy dissipation capacity, stiffness degradation behavior and reduced the shear deformation of the joint core area, as well as changed the failure pattern of the specimen, which led to the failure mode changed from the combination of flexural failure of beams and shear failure of joints core to the flexural failure of beams. In addition, the beam-column joint retrofitted by steel plate exhibited a high bearing capacity, energy consumption capacity and low damage index compared with the joint strengthened by prestressed steel strip, and the prestressed steel strips reinforced joint showed a high strength, energy dissipation capacity and low shear deformation, stirrups strains and damage index compared to the CFRP reinforced joint, which indicated that the frame joints strengthened with steel plate exhibited the most excellent seismic behavior, followed by the prestressed steel strips.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.14-15
• /
• 2003

Polymer optical fibers (POFs) are being considered as important high-speed communication media in the area of local area networks, datalinks and optical sensors. Large core diameter (500～1000 $\mu$m) and large numerical aperture (0.2~0.9) in a POF allow easy processing and connectorization, low cost high efficiency of beam coupling from LDs or LEDs, and complete immunity to EMI／EMR. There are many reports about 2.5 Gbps transmission the polymethylmethacrylate (PMMA) graded index (GI) POF over a distance of 100 m. (omitted)

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.39-53
• /
• 2003

Objectives : The object is to the difference among the funtional disability scale for low back pain and to use Methods : I researched the contents of funtional disability scale for low back pain Results & Conclusions : 1. The funtional disability scale for low back pain is specific-condition and general-health 2. A proposal of set core of funtional disability scale for low back pain is back specific function, generic health state, pain, work disability, satisfaction 3. Oswestry disability index or Rolland disability questionnaire. wase used for standard specific-condition scale and SF-36 was used for standard general-health scale 4. SF-36 is able to use the funtional disability scale for low back pain independence 5. In the future, scale for low back pain shulod be standardized in multiple dimension by computer

• Toxicological Research
• /
• 제20권4호
• /
• pp.365-374
• /
• 2004

Inhalation toxicity, mutagenicity, and immunotoxicity tests were performed using a smoke generation system to investigate the safety of Herbrette, a tobacco substitute made with the leaves of Perilla frutescens. ICR mice were exposed to nicotine-free Herbrette smoke with concentrations of 0 (control), 4.08 $\pm$ 1.32 mg/$m^3$ (low dose), 7.72 $\pm$ 2.14 mg/$m^3$ (medium dose) and 12.83 $\pm$ 1.69 mg/$m^3$ (high dose) total particulate matters (TPM) for 4 weeks. When compared to the control group, the body weights, organ weights in the exposed groups did not show any significant differences. However, certain change of several serum chemical data and biochemical parameters were observed, however, the changes were within normal physiological ranges. Moreover, no changes in organ weight, and no gross/microscopic changes were observed between the exposed and control groups. Salmonella typhimurium reverse mutation, in vivo chromosomal aberration and micronucleus assays revealed that Herbrette did not induce mutagenicity. Upon evaluation of peripheral cellular immunity of mice through in vitro lymphocyte proliferation assay, no significant difference was observed in mean stimulation index between the exposed and control groups. Taken together, our results strongly suggest that Herbrette may not cause toxicity on mice under current condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.307-308
• /
• 2006

The national goal of wind energy dissemination has to be determined rationally based on technically available wind resource potential. For a reliable and scientific estimation or wind resource potential, a wind map is requisite. This paper presents the national wind map of Korea established by numerical wind simulation. Prediction accuracy of the low-resolution wind map is Improved by nudging QuikSCAT data and is validated by comparing with marine buoy beacon and met-mast measurements. Therefore, quantification of national wind resource potential is now possible and is anticipating to be utilized as a core index for policy and strategy building of wind energy dissemination and technology development.

• 한국전문물리치료학회지
• /
• 제25권4호
• /
• pp.27-36
• /
• 2018

Background: We developed a novel integrative lumbar stabilization technique that combines lumbar extension (LE) exercise with abdominal drawing-in maneuver (ADIM) to ameliorate low back pain (LBP) associated with neuromuscular imbalance and instability, based on the collective evidence of contemporary spinal rehabilitation. Objects: The specific aim of the present study was to investigate the effects of LE exercise with and without ADIM on core muscle strength, lumbar spinal instability, and pain, as well as functional characteristics in individuals with LBP using advanced radiographic imaging techniques. Methods: patients with mechanical LBP (N = 40, 6 males; $35.1{\pm}7.6years$) were recruited and randomly assigned either to the combined LE and ADIM (experimental group) or the LE alone (control group). Outcome measures included the visual analog scale, the modified Oswestry Disability Index, muscle strength imbalance (MSI), and radiographic imaging. The lumbar intervertebral displacement (LID), intervertebral (IV) and total lumbar extension (TLE) angles were calculated to evaluate the lumbar segmental instability. Results: The experimental group showed significant differences in the L3-L4, L5-S1 LIDs, L4-L5 and L5-S1 IV angles, and TLE angle as compared to the controls (p<.05). Immediate pain reduction and muscle strength imbalance ratio were significantly different between the groups (p<.05). Conclusion: These results suggest that the addition of ADIM significantly increased lumbar spinal stabilization in individuals with LBP, thereby reducing pain associated with functional lumbar flexion during daily activities.