• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.199-220
• /
• 2004

The Montreal Convention which came into force on November 4, 2003 over the world, has brought a fundamental change to the scope of carrier liability and expanded the sue scope of the carrier. Not only confirms the carrier liability, it also reflects the effects of code-share. In addition to integrate the existing principles that adopted by many conventions, the Montreal Convention has systematized the unity of international air transport into a single convention. It even successfully increased the extremely low compensation amount which was pointed out as a problem in the Warsaw Convention before. The Warsaw Convention, originally stood for the carriers, began to reflect the standpoint of the passengers. The Chinese Civil Aviation Law came into force on March 1, 1996. One of the significant characteristics of the law is that, the regulation on public and private law is mixed combined. Therein, the content of carrier liability system is prescribed in Chapter 9, which is explained in detail in this study. Besides, the relationship between the Montreal Convention and China will be expounded too. So far, China ranks the 5th in RPK and the 6thin FrK. However, in spite of the high ranks, China has not yet joined this convention. This can be regarded as a serious problem. China should join it as soon as possible for a further development and deeper cooperation with the air-industry-developed countries. Once the government ratifies the Montreal Convention, it will benefit both the Chinese passengers and the airlines.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.638-647
• /
• 2006

Recently, the DFT-Spread OFDM has been studied for the PAPR reduction. However, the DFT-Spread OFDM produces more ICI and SCI problems than OFDM because phase offset mismatch of the DFT spreading code results from the random phase noise in the oscillator. In this paper, at first, phase noise influence on the DFT-Spread OFDM system is theoretically analyzed in terms of the BER performance. Then, the conventional ICI self-cancellation methods are discussed and two kinds of ICI self-cancellation methods are newly proposed. Lastly, a new DFT-Spread OFDM system which selectively adopts the ICI self-cancellation technique is proposed to resolve the interference problem and PAPR reduction simultaneously. Proposednew DFT-Spread OFDM system can minimize performance degradation caused by phase noise, and still maintain the low PAPR property. Among the studied methods, DFT-Spread OFDM with data-conjugate method or newly proposed symmetric data-conjugate method show the significant performance improvements, compared with the DFT-Spread OFDM without ICI self-cancellation schemes. The data-conjugate method is slightly better than symmetric data-conjugate method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.681-689
• /
• 2010

We will demonstrate a novel topology for the feedforward amplifier. This amplifier does not use a delay element thus providing an efficiency enhancement and a size reduction by employing a distributed element negative group delay circuit. The insertion loss of the delay element in the conventional feedforward amplifier seriously degrades the efficiency. Usually, a high power co-axial cable or a delay line filter is utilized for a low loss, but the insertion loss, cost and size of the delay element still acts as a bottleneck. The proposed negative group delay circuit removes the necessity of the delay element required for a broadband signal suppression loop. With the fabricated 2-stage distributed element negative group delay circuit with -9 ns of total group delay, a 0.2 dB of insertion loss, and a 30 MHz of bandwidth for a wideband code division multiple access downlink band, the feedforward amplifier with the proposed topology experimentally achieved a 19.4 % power added efficiency and a -53.2 dBc adjacent channel leakage ratio with a 44 dBm average output power.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.1-9
• /
• 2008

As the security requirements of mobile phones have been increasing, there have been extensive researches using one biometric feature (e.g., an iris, a fingerprint, or a face image) for authentication. Due to the limitation of uni-modal biometrics, we propose a method that combines face and iris images in order to improve accuracy in mobile environments. This paper presents four advantages and contributions over previous research. First, in order to capture both face and iris image at fast speed and simultaneously, we use a built-in conventional mega pixel camera in mobile phone, which is revised to capture the NIR (Near-InfraRed) face and iris image. Second, in order to increase the authentication accuracy of face and iris, we propose a score level fusion method based on SVM (Support Vector Machine). Third, to reduce the classification complexities of SVM and intra-variation of face and iris data, we normalize the input face and iris data, respectively. For face, a NIR illuminator and NIR passing filter on camera are used to reduce the illumination variance caused by environmental visible lighting and the consequent saturated region in face by the NIR illuminator is normalized by low processing logarithmic algorithm considering mobile phone. For iris, image transform into polar coordinate and iris code shifting are used for obtaining robust identification accuracy irrespective of image capturing condition. Fourth, to increase the processing speed on mobile phone, we use integer based face and iris authentication algorithms. Experimental results were tested with face and iris images by mega-pixel camera of mobile phone. It showed that the authentication accuracy using SVM was better than those of uni-modal (face or iris), SUM, MAX, NIN and weighted SUM rules.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2000

The IP(imaging plate) has been widely used to measure the two-dimensional distribution of incident radiation since it has a high sensitivity, reusability, a wide dynamic range, a high position resolution. Particularly, the easiness of acquiring digitized image using IP poses a strong merit because recent trend of data handling prefers image digitization. In order to test its usefulness in photon beam dosimetry, we measured the off-axis ratio(OAR) on portal planes and percent depth dose(PDD) within a phantom using IP, and compared the results with the data based on EGS4 Monte Carlo particle transport code, ion-chambers, conventional films. For the measurement, we used 6 MV X-rays, various field sizes. As a result, IP showed significant deviation from ion-chamber measurement: a significant overresponse, 100% greater than that of ion-chamber measurement at deep part of the phantom. Filtration of low-energy scattered photons at deep part of the phantom using 0.5 mm thick lead sheets did improve the result, only to the unacceptable extent. However, portal dose measurement showed possibilities of If as a dosimeter by showing errors less than 5%, as compared with film measurement.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.267-271
• /
• 2013

A survey of aflatoxin $B_1$ and ochratoxin A was conducted on dried red pepper and red pepper powder. Total number of 193 samples were collected from local markets in Incheon. The presence of aflatoxin $B_1$ and ochratoxin A was determined by high performance liquid chromatography (HPLC) with fluorescence detector using immunoaffinity column clean-up. The recovery rate of aflatoxin $B_1$ and ochratoxin A were more than 80% and the limits of quantification were 0.13 ${\mu}g/kg$ for aflatoxin $B_1$ and 0.30 ${\mu}g/kg$ for ochratoxin A. Aflatoxin $B_1$ was detected in 33 samples (17.1%) with a range of 0.14~9.67 ${\mu}g/kg$ and ochratoxin A was detected in 40 samples (20.7%) with a range of 0.31~3.31 ${\mu}g/kg$. These results show that the occurrence of aflatoxin $B_1$ and ochratoxin A in dried red pepper and red pepper powder tested in this study is low compared with the standard in Korea Food Code (10 ${\mu}g/kg$ as aflatoxin $B_1$ and 7 ${\mu}g/kg$ as ochratoxin A).

• 대한공업교육학회지
• /
• v.32 no.1
• /
• pp.93-116
• /
• 2007

The purpose of this study was to improve the academic achievement at the public practical center of technical high school in Busan. For this study, 1 class(31 students) in the second grade at "B"technical high school were selected and these students were divided into two groups. One is the experiment group which blended learning was applied to and the other is control group which traditional lecture method was applied to. Each group was divided into three sub-groups by the level of learning ability. Non-randomized control-group pretest-posttest design was applied for this experiment planning. The subject of experiment was the unit of "3D Modeling and Making NC code" in the textbook of "Application of Automatic System" applied by the public practical center of technical high school in Busan. On-line contents were developed and applied to the blended learning to control group. In order to analyze the test result, t-test with a significance level of 0.05 was carried out using SPSS 10.0. The results of this study was summarized as follows; First, as a result of the post test performed on the experiment and the control group, there was a significant difference between two groups, that was, the blended learning was more effective than the traditional lecture method in improving academic achievement. Second, blended learning was more effective than the traditional lecture method in the group of high-leveled and middle-leveled, but was little effective on the low-leveled group. Third, blended learning was more effective than the traditional lecture method in the functional domain, but was little effective in the cognitive domain and psychomotor domain.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.21-32
• /
• 2011

The district units planning suggests not only detailed standards of building as parts of the whole plan in the district but also a guideline of the arrangement, shape and pavement of the public open space, in order to move away from the rigid image of an institution which causes the formal creation of it. This triggered various problems. While the basic plan for adjustment of urban environments(established in 2005) was being reorganized in order to reflect changed conditions of the city center, the sector of public open space was subdivided according to the guidelines of development by district. We conducted a comparative analysis of conditions before and after the adjustment, so as to examine whether or not the reorganized institution is effective for the plan of public open spaces. The analysis showed that there was no remarkable change between the basic plan and the reorganized institution in that items which were not any different from the existing building codes were established due to lack of guidelines related to public open space under the law of urban and residential environmental improvement. Low regulations should set up criteria for establishment from a concrete, effective microscopic aspect appropriate to the significance of public open space by the linking of public open space and the surrounding environment, whereas high regulations such as building codes should specify essential components.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.148-158
• /
• 2007

Recently, IEEE 802.15.4a(low-rate UWB) technique has been paid much attention to the LR-UWB communication system for WPAN. However, there are various interferences such as MPI(Multi Path Interference) or IPI(Inter Piconet Interference) in IEEE 802.15.4a wireless channel. In order to cancel various interferences occurred to WPAN environment, in this paper, we propose a UWB wireless communication system with high QoS(Quality of Service) which is a chaotic-OOK(On-Off Keying) system using unipolar ZCD(Zero Correlation Duration) spreading code in physical layer level. Furthermore, we analyze its performance via simulations and verify the availability of proposed system with prototype implementation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.155-163
• /
• 2014

Total concentration and chemical speciation of trace metals (Cu, Pb, Zn, Cd, and Ni) were determined to evaluate pollution level and potential ecological risk in surface sediments of the Masan Bay. The results showed that the trace metal concentrations, except for Ni, were high in the inner Masan Bay. Based on the chemical speciation of metals in sediments, the percentage of total concentrations of Cd and Pb in non-residual fraction was 92% and 88%, respectively, indicating that these metals originated mainly from anthropogenic sources. However, Ni (70%) was dominant in residual fraction. Pollution load index (PLI) and ecological risk index (ERI) values in the inner bay indicate the presence of anthropogenic pollution and considerable-moderate ecological risk, respectively. Ecological index (Ei) value for Cd was high at most stations in the Masan Bay, and Cd content was the highest in acid soluble fraction, which presents the highest ecological risk. The results obtained in this study indicate that Cd presents a high potential ecological risk to benthic biota in the Masan Bay.