• 한국노년학
• /
• v.30 no.1
• /
• pp.21-30
• /
• 2010

Obese people experience dissatisfaction of body, depression, anxiety, and emotional disturbance by social prejudice and discrimination, further they represent decline of health-related quality of life. Exercise therapy is recommended as one of the positive treatments to improve the emotional pain of obese people. This study is to provide guideline of exercise prescription for obese people by investigating the effects of qigong exercise on psychological factors such as health-related quality of life (SF-36), self-efficiency, depression, anxiety, and fatigue in obese people. The subjects of this study were 50~60s adults participated in Golden-Wellbeing program at S university in G gu of S city and were devided into exercise (N=17) and control (N=16) group. Qigong exercise was performed twice per week for 12 weeks and SF-36, self-efficiency, depression, anxiety, and fatigue were measured before and after 12 weeks of exercise. In the 8 items of SF-36 before and after 12 weeks of qi-gong exercise, there was no significance in role limitation-emotional (F=0.187, p=0.668), mental health (F=2.043, p=0.163) between groups, but there was significance in physical functioning (F=15.151, p<0.001), role limitation-physical (F=18.278, p<0.001), social functioning (F=4.957, p=0.033), vitality (F=11.485, p=0.002), bodily pain (F=6.623, p=0.015), and general health (F=4.498, p=0.042) between groups. Also, anxiety (F=0.631, p=0.433) was not significant, whereas self-efficiency (F=6.124, p=0.019), depression (F=5.109, p=0.031), fatigue (F=7.998, p=0.008) was significant between groups. Even though qigong is slow motion and low intensity of exercise, it was found that qi-gong has exercise effect which induces mental and psychological improvement through this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4073-4081
• /
• 2012

This study was designed to estimate the prevalence of arthritis and to identify subgroups with high prevalence rates of arthritis. Study subjects were 18,406 Korean adults aged 19 and more from the 4th (2007-2009) Korea National Health and Nutrition Examination Surveys data. Annual self-reported prevalence and its rate ratios by demographic and behavioral factors were calculated using SAS 9.2 with survey procedure. The result was as follows. The crude prevalence of arthritis was 11.7% (osteoarthritis 10.2% and rheumatoid arthritis 1.7%). The prevalence was increased by age strata (2.4% in 19-44 aged, 16.4% in 45-64, 38.3% in 65 and more). After adjusting for age, we found the subgroups with high prevalence: older people, women, residents in non-apartment area, separated and divorced people, people with low education, people with several occupations (agricultural and fishery workers, elementary occupations, and unemployed), people with low household incomes, people with medical aid, and people with higher BMI. Those subgroups may be target populations in community health programs to control the disability from arthritis.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.397-405
• /
• 2012

In this study, performance evaluation of newly developed technology for the economical and safe removal of volatile organic compounds (VOCs) coming out from electronic devices washing operation and offensive odor induction materials was made. Metal oxidization catalyst has shown 50% of removal efficiency at the temperature of $220^{\circ}C$. Composite metal oxidization catalyst applied in this study has shown that the actual catalysis has started at the temperature of $100^{\circ}C$. Comprehensive analysis on the catalyst property using Mn-Cu metal oxidization catalyst in the pilot-scale unit was made and the removal efficiency was variable with temperature and space velocity. Full-scale unit developed based on the pilot-scale unit operation has shown 95% of removal efficiency at the temperature of $160^{\circ}C$. Optimum elimination effective rates for the space velocity was found to be $6,000hr^{-1}$. The most appropriate processing treatment range for the inflow concentration of VOCs was between 200 ppm to 4,000 ppm. Catalyst control temperature showed high destruction efficiency at $150{\sim}200^{\circ}C$ degrees Celsius in 90~99%. External heat source was not necessary due to the self-heat reaction incase of VOCs inflow concentration is more than 1,000 ppm. Equipment and fuel costs compared to the conventional RTO/RCO method can be reduced by 50% and 75% respectively. And it was checked when there was poisoning for sulfide and acid gas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• Journal of The Korean Association For Science Education
• /
• v.43 no.3
• /
• pp.295-306
• /
• 2023

In this study, we explored science teachers' perceptions of adaptive practice in terms of importance and practice. For this purpose, an adaptive practice questionnaire was developed targeting secondary science teachers, and the responses of 128 science teachers were analyzed. The results of this study were as follows: First, the science teachers responded that all 17 items regarding adaptive practice were important. In particular, items related to 'addition of examples', 'adjustment of the level/range of concepts', and 'encouragement of student participation' showed high importance and performance levels. Second, the results of the IPA concerning adaptive practice showed that the items needing intensive improvement due to high importance but low performance were 'encouraging students' self-directed learning' and 'monitoring and responding to individual differences'. The science teachers identified a lack of time and uniform curriculum as the reasons for the low level of practice despite the high importance of these items. Third, regarding the IPA of the adaptive practice items, the items located in the fourth area, an excessive area, concerned 'pace control', 'modifying activities', and 'metaphor use'. More specifically, considering that 'metaphor use' was the only item with a higher level of performance than importance, it is necessary to reconsider whether problems are caused by excessive use. Fourth, analyzing the responses regarding the reasons for the difference in importance and performance revealed that the factors related to teachers included teachers' lack of knowledge or ability, and the tendency to implement as planned. As for student factors, an excessive number of students, differences in the levels of students, and a tendency to prefer classes centered on entrance exams were identified. As environmental factors, a uniform curriculum, conditions for experiments, evaluation systems, and external demands were mentioned. Finally, the implications of the results of this study for science education were discussed.

• Journal of radiological science and technology
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2014

Breast shooting performance management and quality control of the generator is applied to the amount of current IEC(International Electrotechnical Commission) 60601-2-45 tube voltage and tube current are based on standards that were proposed in the analysis of the test results were as follows. Tube voltage according to the value of the standard deviation by year of manufacture from 2001 to 2010 as a 42-3.15 showed the most significant, according to the year of manufacture by tube amperage value of the standard deviation to 6.38 in the pre-2000 showed the most significant, manufactured after 2011 the standard deviation of the devices, the PAE(Percent Average Error) was relatively low. This latest generation device was manufactured in the breast of the tube voltage and tube diagnosed shooting the correct amount of current to maintain the performance that can be seen. The results of this study as the basis for radiography diagnosed breast caused by using the device's performance and maintain quality control, so the current Food and Drug Administration "about the safety of diagnostic radiation generator rule" specified in the test cycle during three years of self-inspection radiation on a radiation generating device ensure safety and performance of the device using a coherent X-ray(constancy) by two ultimately able to keep the radiation dose to the public to reduce the expected effect is expected.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4885-4892
• /
• 2016

Background: Chinese and Korean Americans have lower colorectal cancer (CRC) screening rates than other racial/ ethnic groups, which may be explained by a low level of CRC knowledge and a high level of misconceptions. This study explores the role of knowledge in CRC screening among these groups. Methods: Chinese (N=59) and Korean (N=61) Americans older than 50 were recruited from the Washington D.C. Metropolitan area. They completed a detailed survey and participated in focus groups to discuss their knowledge on CRC and CRC screening. Seventeen physicians, community leaders, and patient navigators participated in key informant interviews. Using a mixed methods approach, data were analyzed quantitatively and qualitatively. Results: Participants lacked knowledge about CRC and CRC screening. More than half did not know that screening begins at age 50 and there are several types of tests available. More than 30% thought CRC screening was not necessary if there were no symptoms or there was nothing they could do to prevent CRC. Focus group findings suggested understanding about CRC was limited by an inadequate source of linguistically and culturally relevant health information. For example, many participants considered CRC a western condition mainly caused by unhealthy diet. This led to under-estimations about their susceptibility to CRC. Knowledge was positively associated with self-reported screening. Participants who had higher knowledge scores were more likely to report ever having had a colonoscopy and confidence in ability to have CRC screening. Conclusions: Mixed-methods analysis provides multi-faceted perspectives on CRC knowledge and its influence on screening. Study findings can help inform interventions to increase CRC screening among Chinese and Korean Americans.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.