본 논문에서는 다채널 가변광감쇠기에서 발생하는 열간섭 효과를 차단하여 광효율을 높이기 위하여 펨토초 레이저를 이용하여 트렌치를 가공하였다. 채널간 열간섭으로 인한 광감쇠 제어효율 하락을 막기 위하여, 가변광감쇠기 채널 사이에 펨토초 레이저로 트렌치의 폭과 깊이를 다르게 하여 가공하였고, 적용된 각 칩을 모듈화하여 전류에 따른 광감쇠율 변화를 관찰하였다. 그 결과 광감쇠를 위해 가해진 열이 주변채널에 영향을 매우 작게 미치는 것을 확인하였고, 뿐만 아니라 작은 전류에 광감쇠율이 민감하게 변화하는 것을 확인할 수 있어 효율적인 소자로서 개발 가능함을 확인하였다.
Laser welding has superior characteristic such as low distortion, high welding speed, easy automation and real time control. But it is easy to occur weld defects such as porosity, crater, humping bead in the area of welding start and end. These weld defects can be suppressed by applying the wave shape control. In this study CW fiber laser was used for welding of $0.5mm^t$ pure titanium. Penetration properties were evaluated with the time of slope up and down. After then the bead shape was observed, and the maximum depth and the area of crater were measured. The bead shape of welding start area changed to be sharp with increase of slope up time and non-weld area of welding start increased. The crater and humping bead were suppressed with slope down time. The cooling rate of crater area was understood through measure of the hardness. Also, The distribution tendency of alloying elements was observed by EPMA and EDS. When wave shape control didn't applied to weld, the hardness of end weld increased due to rapid cooling rate and the hardness of rear part in the crater was higher than that of fore part. On the other hand, when the wave shape control was used for end weld, the increase of hardness in the end weld couldn't be found due to gradual cooling rate.
The purpose of this study was to investigate the bio-stimulating effect of low power density laser radiation on the mechanically exposed pulp. Class V cavities on dog's teeth were prepared and the pulps were mechanically exposed with a round bur. In control group, the exposed pulps were capped with $Ca(OH)_2$ powder and the cavities were sealed with Z.O.E.. In experimental group A, the pulps were irradiated with GaA1As laser for 5 minutes and then they were treated the same as control group. In experimental group B, the exposed pulps were covered by aluminum foil and sealed with Z.O.E. after they were irradiated with the laser as the experimental group A. In the all groups, the pulps were histopathologically observed at the time intervals of 1, 2 and 3 week after experiment and the results were statistically evaluated. The results were as follows: 1) In control and experimental groups, mild vascular congestion and bleeding was found in most of the specimens and for the new formation of dentin bridge, experimental group A had the most cases. The dentin bridge had discontinuous osteodentin like appearance without any dentinal tubules. Inflammatory cell infiltration consisted of acute and chronic inflammatory cell, and the formation of microabscess was also observed. 2) The degree of inflammatory cell infiltration was not significantly different among control group and experimental groups at 1 week, 2 week and 3 week. 3) The formation of new dentin bridge was not significantly different between control group and experimental group A at 1 week, but at 2 week and 3 week, experimental group A showed significantly more cases of new dentin formation than control groups. (P < 0.05). 4) Between control group and experimental group B, there was no significant difference in formation of the new dentin bridge at 1, 2 and 3 week. (P> 0.05). 5) There was no significant difference in formation of the new dentin bridge at 1 and 2 week between experimental group A and experimental group B, but at 3 week, the former significantly had more cases of new dentin bridge formation than the latter.(P < 0.05).
니켈기지의 석출강화 초내열합금은 가스터빈의 고온부 부품 제조에 널리 사용되고 있다. 장시간 동안 부품의 강성 유지와 구조적 안정성을 확보하기 위해서는 니켈기지의 합금에 감마프라임 생성을 위한 원소를 첨가하는데 이에 따른 용접성의 저하 때문에 보통 초합금의 용접은 고온에서 수행하게 된다. 그러나 레이저용접의 경우는 용접변수 및 입열제어가 용이해 상온에서 초합금의 용접이 가능한 장점이 있다. 본 연구에서는 일반적인 재료로 연성이 좋은 STS304 판재와 실제 블레이드의 재료로 사용되는 니켈계 석출강화 합금인 GTD 111DS 모재에 $CO_2$ 레이저를 이용하여 용접을 실시하였고 적용파우더와 파워, 용접속도 및 파우더 공급량 등을 달리 하였다. STS304 판재 사용시 Rene 80과 IN 625 파우더 모두 용접부에서 균열이 발생하지 않았다. 그러나 GTD 111DS 모재의 경우 IN 625 파우더에서는 결함이 없었으나 Rene 80 파우더를 사용시에는 용접부에 균열이 발생하였다. IN 625 파우더는 모재보다 기계적 성질이 떨어지는 문제가 있으나 Rene 80은 모재와 동등 이상의 기계적 성질을 보유하고 있기 때문에 Rene 80 의 적용을 위해 균열이 발생하지 않는 용접변수의 제어를 시도하였다. 용접변수의 조정 결과 레이저 파워와 파우더 공급량을 낮추고 용접속도를 높여 균열이 발생하지 않는 최적의 용접변수를 설정할 수 있었다. 최적화된 용접변수를 적용, 용접한 시편의 인장값을 보면 GTD 111DS 모재에 Rene 80 파우더로 용접된 시편의 인장강도가 상온/고온($760^{\circ}C$)의 조건에서 각각 GTD 111DS 모재의 인장강도 보다 높은 값을 나타내었다.
1$\times$2, 1$\times$4 및 4$\times$4 LD-gate형 반도체 광스위치 모듈을 제작하였다. 스위치 소자와 광섬유와의 광결합을 위해서 테이퍼드 광섬유를 어레어로 제작하여 사용하였으며 30핀 버터플라이형 패키지로 완성하였다. 광 부푼 정렬 및 고정에서는 레이저 용접법 및 햄머링 공정을 이용하여 최초의 광정렬 값에서 평균 82%까지 복원하였다. 완성된 모듈에 대한 평가를 위해 전송 실험을 수행하였는데 1$\times$2 스위치 모듈이 삽입되었을 때 223-1의 단어길이를 갖는2.5Gbps 광신호에 대해서 전송패널티가 약0.5dB~2dB로 나타났으며, 광섬유의 분산특성에 의하여 발생하는 전송 패널티에 대해서는 50km 및 90km 광섬유에 대해서 각각 0.6dB 및 0.7dB의 작은 패널티가 발생하였다. 1$\times$4 및 4$\times$4 스위치 모듈을 이용한 전송특성 평가에서도 모두 -30dB 이하의 수신감도를 갖는 우수한 결과를 보였다.
경면물체의 형상과 두께를 측정하는데 있어 접촉식 센서가 가지고 있는 문제점을 해결하기 위해 홀로그램 레이저 다이오드와 자동 전력 제어를 이용하여 성능이 좋은 비접촉식 광센서를 개발하였다. 접촉식 센서에서는 센서 프로브가 측정 대상체와 계속해 접촉하므로 프로브의 마모로 인한 측정왜곡이 발생하게 된다. 이를 극복하기 위해 플라스틱렌즈와 CD 플레이어의 광학 픽업장치를 홀로그램 레이저로 구성하는 저가의 비접촉 센서를 제안한다. 비접촉식 광센서는 대상물체 쪽으로 움직이면서 포커스 에러 신호를 얻어 투명판의 형상과 두께를 측정할 수 있다. 센서 내부 온도를 ${\pm}0.1^{\circ}$ 제어한 상태에서 다수의 실험 측정을 수행하여 ${\pm}2{mu}m$의 측정 오차를 가지는 우수한 결과를 보이고 있다.
자율주행 차량이 주목받게 되면서 LiDAR 센서가 대두되었다. LiDAR 센서는 LASER를 이용하여 범위 내에서 특정 지점까지 측정된 거리 값을 3차원 정보로 제공한다. 3차원 거리 값인 만큼 방대한 데이터를 전송하게 되고, 차량의 메인 프로세서 등에서 다른 데이터와 같이 이를 실시간으로 처리하기에는 무리가 있다. 이러한 이슈를 해결하기 위해 통합처리 시스템을 개발하고자 한다. 시스템은 센서로부터 데이터를 받아 처리하는 client와 각 client로부터 데이터를 취합하여 이를 외부로 전송하는 server 프로세스로 구성된다. 각 프로세스의 데이터 수신 및 처리 방법, 프로세스 구동 방법을 변화시켜가며 시스템의 실시간성 확보를 위한 테스트를 진행하였다. 실험 결과, 4대의 LiDAR 센서로 데이터를 수신 받도록 하였으며, background 나 multi-core processing을 적용하여 프로세스를 동작시켰을 때, 각 client는 약 13.2 ms, server는 약 12.6 ms의 응답시간을 확인할 수 있었다.
A cold-work tool steel powder is used to fabricate 3-dimensional objects by selective laser melting using a high-pressure gas atomization process. The spherical powder particles form continuous carbide networks among the austenite matrix and its decomposition products. The carbides comprise Nb-rich MC and Mo-rich $M_2C$. In the SLM process, the process parameters such as the laser power (90 W), layer thickness ($25{\mu}m$), and hatch spacing ($80{\mu}m$) are kept fixed, while the scan speed is changed from 50 mm/s to 4000 mm/s. At a low scan speed of 50 mm/s, spherical cavities develop due to over melting, while they are substantially reduced on increasing the speed to 2000 mm/s. The carbide network spacing decreases with increasing speed. At an excessively high speed of 4000 mm/s, long and irregularly shaped cavities are developed due to incomplete melting. The influence of the scan pattern is examined, for which $1{\times}1 mm^2$ blocks constituting a processing layer are irradiated in a random sequence. This island-type pattern exhibits the same effect as that of a low scan speed. Post processing of an object using hot isostatic pressing leads to a great reduction in the porosity but causes coarsening of the microstructure.
지향성적외선방해장비의 정렬 정밀도를 높히고 중량을 감소시키기 위해 적용된 적외선 카메라-레이저 공통광학계 구조에서 영상 성능 저하를 야기시키는 레이저빔 열 영향성을 분석하였다. 높은 에너지 밀도를 가지는 레이저빔이 광부품에 흡수되면 열이 발생하고 온도가 상승한다. 공통광학계 광부품 표면에서 발생한 열은 시스템 투과율을 감소시켜 적외선 카메라의 영상 품질을 저하시킬 수 있다. 지향성적외선방해장비의 운용개념을 고려하여 파장 $4{\mu}m$, 출력 3 W의 레이저빔이 10초간 미러(알루미늄, 실리카 글래스, 실리콘) 및 렌즈(사파이어, 셀레늄화아연, 실리콘, 게르마늄) 재료에 조사되는 상황을 가정하여 온도 분포를 계산하였다. 계산 결과, 미러 재료로는 실리카 글래스, 렌즈 재료로는 사파이어의 온도 상승이 상대적으로 컸고, 재료 온도 분포에 가장 큰 영향을 미치는 요소는 재료의 레이저빔 흡수율과 열전도도임을 확인하였다. 결론적으로 적외선 카메라-레이저 공통광학계에 사용하는 광부품은 흡수율이 낮고 열전도도가 높은 특성을 갖도록 선정되어야 광부품 온도 상승에 의한 적외선 카메라의 영상 품질 저하를 방지할 수 있다.
Goo, Hyeyoon;Kim, Hoon;Ahn, Jin-Chul;Cho, Kyong Jin
Medical Lasers
/
제8권2호
/
pp.50-58
/
2019
Background and Objectives Low-level light therapy (LLLT) is an application of low-power light for various purposes such as promoting tissue repair, reducing inflammation, causing analgesia, etc. A previous study suggested the effect of light emitting diode (LED) light with the wavelength of 740 nm for promoting wound healing of corneal epithelial cells. This current study aimed to confirm the effect of LLLT for managing inflammation of a dry eye disease (DED) mouse model. Materials and Methods A total of 50C57BL/6 female mice were randomly grouped into 5 groups to compare the effect of LLLT:1) Control group, 2) Only LLLT group, 3) Dry eye group, 4) LLLT in dry eye group, and 5) Early treatment group. DED was induced with 4 daily injections of scopolamine hydrobromide and desiccation stress for 17 days, and LLLT at 740 nm was conducted once every 3 days. To analyze the effect of LLLT on the DED mouse model, tear volume, corneal surface irregularities, and fluorescence in stained cores were measured, and the level of inflammation was assessed with immunohistochemistry. Results The DED mouse model showed significant deterioration in the overall eye condition. After LLLT, the amount of tear volume was increased, and corneal surface irregularities were restored. Also, the number of neutrophils and the level of inflammatory cytokines significantly decreased as well. Conclusion This study showed that LLLT at 740 nm was effective in controlling the corneal conditions and the degree of inflammation in DED. Such findings may suggest therapeutic effects of LLLT at 740 nm on DED.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.