• 대한치과기공학회지
• /
• 제36권4호
• /
• pp.239-246
• /
• 2014

Purpose: The purpose of this study was to compare the tensile strength and mechanical properties of orthodontic wire joints made by gas soldering and laser welding, with and without filling material, to identify the effectiveness and potential clinical application of laser welded orthodontic wires. Methods: Three joint configurations of orthodontic wire were used: diameter 0.9 to 0.9 mm wire, diameter 0.9 to 0.5 wire and diameter 0.9 mm wire to band. The joints were made using three different methods: gas soldering, laser welding with and without filling material. For each kind of joint configuration or connecting method 7 specimens were carefully produced. The tensile strengths were measured with a universal testing machine (Zwick/Roell, Instron, USA). The hardness measurements were carried out with a hardness tester(Future-Tech Co. Tokyo, Japan). Data were analyzed by AVOVA(p= .05) and Turkey HD test(p= .05). Results: In all cases, gas soldering joints were ruptured on a low level on tensile bonding strength. Significant differences between laser welding and gas soldering(p< .05) were found in each joint configuration. The highest tensile strength means were observed for laser welding, with filling material, of 0.9 to 0.9 mm wire joint. Conclusion: In conclusion, the elastic modulus and tensile strength means of laser soldering with filling material were the highest, and the tensile strength means of laser soldering were higher than those of gas soldering.

• 한국수자원학회논문집
• /
• 제48권3호
• /
• pp.159-167
• /
• 2015

댐 운영에 있어서 저수지 초기 담수 시 또는 집중호우 등에 의한 급격한 수위 상승 방지나 운영 중에 댐체 점검 및 수리 또는 자연재해로 인한 위급한 상황 발생 등 저수지를 비워야 할 상황이 발생할 수 있으며, 이에 대한 대책으로 비상 시 방류할 계획 및 설비가 필요하다. 그러나 현재 국내에는 이러한 비상방류에 대한 기준이 미비한 실정이다. 본 연구에서는 댐 안정성 제고를 위해 유사시 저수지 저류량을 안전하게 배제시킬 수 있는 비상방류 설비를 저수지 모의 모형인 HEC-ResSim 모형을 이용하여 규모 및 배제일수에 대하여 모의하고 산정하였다. 저수지 규모에 따라 세 개의 댐에 대해 검토하였다. 대상댐은 저류용량을 기준으로 10억 $m^3$ 이상인 소양강댐과 1~10억 $m^3$ 댐으로 합천댐, 1억 $m^3$ 미만의 댐으로 대곡댐을 선정하여, 방류시설의 규모를 산정하고 배제일수를 모의하여 기준의 적정성과 적용 가능성에 대해 검토하였다.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.489-492
• /
• 2007

Temperature and injection current dependence of elctroluminescence(EL) spectral intensity of the $In_{0.27}Ga_{0.73}N/GaN$ multi-quantum-well(MQW) have been studied over a wide temperature and as a function of injection current level. EL peaks also show significant broadening into higher photon energy region with the increase of injection current. This is explained by the band-filling effect. When temperature is slightly increased to 300 from 15 K, the EL emission peak showed red-blue-red shift. It can be explained by the carrier localization by potential fluctuation of multiple quantum well and band-gap shrinkage as temperature increase. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents show a drastic difference. This unique EL efficiency variation pattern with temperature and current is explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields.

• Environmental Analysis Health and Toxicology
• /
• 제21권2호
• /
• pp.93-102
• /
• 2006

Methyl tert-butyl ether (MTBE), an octane booster that is added to the reformulated gasoline, has been a widespread contaminant in aquatic ecosystem. MTBE is a recalcitrant pollutant having low biodegradability. Due to its higher water solubility and low octanol-water partition coefficient, it can be rapidly transported to the surrounding water environment. Also, MTBE is a known animal carcinogen, and is classified as a possible human carcinogen by U. S. Environmental Protection Agency. The adverse effect of MTBE to aquatic biota was widely reported. In Korea, the recent detection of MTBE in groundwater near gasoline filling stations has drawn concern to public health and ecosystem. To address this concern, the effect of MTBE to human health and ecosystem was discussed in this review. Also, ecotoxicity data of MTBE for fish, invertebrates, and algae were extensively compared to estimate the hazard concentration 5($HC_5$) of MTBE as a screening level.

• Restorative Dentistry and Endodontics
• /
• 제34권4호
• /
• pp.350-355
• /
• 2009

복합 레진은 중합되는 동안 수축으로 인한 응력이 발생하게 되고 이는 결합력 실패를 야기한다. 치질과의 결합력은 접착면의 성질에 영향을 받게 되는데 대부분의 연구들은 편평한 접착면상에서 이루어졌으며 와동내 와벽 위치에 따른 결합력 차이에 관한 연구는 미미한 실정이다. 이에 본 연구에서는 Ⅰ급 복합레진 수복시 단일 충전한 경우와 적층 충전한 경우에 있어서 와동의 치수벽과 측벽에서의 결합력 차이를 알아보고자 하였다. 발거된 20개의 건전한 제3 대구치를 대상으로 6 ${\times}$4 ${\times}$3 mm 크기의 박스 형태로 와동을 형성한 후 레진 충전방법과 와동벽에 따라 4개 군으로 분류하였다. 단일 충전하고 치수벽의 결합력을 측정한 A군, 단일 충전하고 측벽의 결합력을 측정한 B군, 적층 충전하고 치수벽의 결합력을 측정한 C군, 적층 충전하고 측벽의 결합력을 측정한 D군으로 설정하였다. 제조사의 지시에 따라 Clearfil SE $bond^{(R)}$(Kuraray Corp., Osaka, Japan)로 치면 처리한 후 Filteck Z $250^{(R)}$(3M/ESPE., St. Paul, USA)을 사용하여 와동을 충전하였다. 적층 충전군의 경우 1.5 mm씩 두 번에 나누어 충전하고 각각 40초씩 중합하였다. $37^{\circ}C$의 증류수에서 24시간 보관 후 교합면쪽 법랑질을 제거하고 수복물의 근원심 폭의 절반되는 지점에서 협설 방향으로 치아를 잘랐다. 주수하에 고속 diamond saw를 사용하여 각 치아의 접착면에 수직으로 1 ${\times}$1 ${\times}$7 mm의 막대 형태의 시편을 만들었으며 만능시험기에 부착하고 1 mm/min의 속도로 미세인장 결합강도를 측정하였다. 2-way ANOVA test와 t-test를 이용하여 95% 유의수준으로 통계 분석한 결과는 다음과 같다. 1. 충전 방법의 경우, 적층 충전군이 단일 충전군보다 높은 평균값을 보였으나 통계적 유의성은 없었다. 2. 와동벽에 따른 결합력 차이의 경우, 치수벽 군이 측벽 군보다 결합력이 큰 것으로 나타났으나 유의성은 없었다. 본 연구 결과만을 토대로 볼 때, 충전 방법과 와동벽의 두 가지 요소가 치질과의 결합력에 미치는 영향이 크지 않았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.215-215
• /
• 2010

The feasibility of InSbTe (IST) chalcogenide materials prepared by metalorganic chemical vapor deposition (MOCVD) for phase-change memory (PRAM) applications was demonstrated. Films grown below $225^{\circ}C$ exhibited an amorphous structure, and the films grown at $300^{\circ}C$ Cincluded various crystalline phases such as In-Sb-Te, In-Sb, In-Te, and Sb-Te. The composition of the amorphous films grown at $225^{\circ}C$ was dependent on the working pressure. Films grown at $225^{\circ}C$ exhibited a smooth morphology with a root mean square(rms) roughness of less than 1nm, and the step-coverage of the films grown on a trench structure with an aspect ratio of 5:1 was greater than 90%. An increase in deposition time increased the filling rate, while retaining the conformal step-coverage. Films grown at $225^{\circ}C$ for 3h in a working pressure of $13{\times}10^2$ Pa exhibited a reproducible and complete filling in a trench structure.

• 한국치위생학회지
• /
• 제11권3호
• /
• pp.405-417
• /
• 2011

Objectives : A precedent research has documented that indoor air pollution is closely associated with increased the risk of symptom and decreased in job satisfaction. This study was conducted in an effort to assess the relationship of indoor air quality to self-perceived symptom and satisfied with working environment. Methods : This research is based on self-filling survey which 393 dental hygienists who work in seoul and Jeon-nam area participated on October 2010 through January 2011. This survey was compared and analyzed about the level of satisfaction and subjective symptom by the indoor air quality that dental office's working environment. Results : The result of satisfaction degree of hospital working environment was pretty low about office air. Most people mentioned that they were sore and dull all over the back, shoulder, and neck. Also, they were drowsy and exhausted in work place. Conclusions : In conclusion, it is need to improve their quality of life and mental health by developing proper air conditioning system and using one in their work place.

• 센서학회지
• /
• 제15권1호
• /
• pp.58-64
• /
• 2006

In this study, we describe a low-temperature wafer-level thermocompression bonding using electroplated gold seal line and bonding pads by electroplating method for RF-MEMS devices. Silicon wafers, electroplated with gold (Au), were completely bonded at $320^{\circ}C$ for 30 min at a pressure of 2.5 MPa. The through-hole interconnection between the packaged devices and external terminal did not need metal filling process and was made by gold films deposited on the sidewall of the throughhole. This process was low-cost and short in duration. Helium leak rate, which is measured to evaluate the reliability of bonded wafers, was $2.7{\pm}0.614{\times}10^{-10}Pam^{3}/s$. The insertion loss of the CPW packaged was $-0.069{\sim}-0.085\;dB$. The difference of the insertion loss between the unpackaged and packaged CPW was less than -0.03. These values show very good RF characteristics of the packaging. Therefore, gold thermocompression bonding can be applied to high quality hermetic wafer level packaging of RF-MEMS devices.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.513-520
• /
• 1999

20 million tons of coal ash has been produced in Korea annually. This causes the environmental problems and the cost of land for ash pond. However the amount of coal ash for recycling is small because of the low level of recycling technology and the ignorance. As the coal ash has the significant engineering properties, it can be utilized as soft ground stabilizer, backfill materials and so forth. The purpose of this paper is to summarize some of the recycling methods of coal ash. One is structural backfill materials, the other is flowable fill. Optimal mixture ratio(fly ash : bottom ash) is determined for structural backfill materials and the model test is performed. The model test accompanied with physical tests were executed for identifying that the flowable fly ash can be used as fill materials such as trench back filling.

• Korean Journal of Mathematics
• /
• 제19권4호
• /
• pp.453-464
• /
• 2011

We used SAS program in statistics class as a plan to increase effect of class. Because lease cost of SAS program is high and low-level students felt difficulty of the syntax of SAS program, I planned to introduce other instruction-software. We observe whether it's O.K. to use Excel instead of SAS program and Excel is helpful in having positive attitudes. We try to compare and analyze the merits of two programs. The purpose of this study is to apply Excel to statistics class, cut down the cost of instruction-software, and make students understand statistics more conveniently and easily.