• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.77-86
• /
• 2013

본 연구는 목조주택의 건물에너지 성능을 평가하고 개선하기 위해 수행되었다. 목조주택의 에너지 요구량을 산정하기 위하여 CE3 (Construction Energy Efficiency Evaluation) 웹기반 소프트웨어를 사용하였고 그 결과 대상 주택의 연간 난방에너지 요구량은 바닥면적 1 $m^2$당 160 kWh로 계산되었다. 난방에너지 요구량을 줄이기 위해 다음 4가지의 에너지 절감방법을 채택하였다; a) 건물형태의 단순화, b) 창호면적의 축소, c) 고성능 창호의 적용, d) 폐열회수환기장치의 적용. 열관류율 1 $W/m^2{\cdot}K$의 고성능창호로 교체할 경우 대상 주택의 난방에너지 요구량은 80 $kWh/m^2{\cdot}a$로 감소하였다. 4가지 방법을 조합하여 적용하면 고성능창호와 폐열회수환기장치를 함께 적용하였을 때 난방에너지 요구량은 34.5 $kWh/m^2{\cdot}a$로 감소하여 가장 우수한 성능을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.89-100
• /
• 2014

Energy consumption statistics in 2005 from the Korea Energy Management Corporation show that building energy usage was about 24.2% of total domestic energy consumption, and 64% of total building energy usage was consumed by residential buildings. Thus, about 10% of total domestic energy consumption is due to the heating of residential buildings. Building energy can be calculated by the configuration of the building envelope and the rate of infiltration (the volume of the infiltration of outdoor air and the leakage of indoor air), and by doing so, the annual energy usage for heating and cooling. Therefore, air-tightness is an important factor in building energy conservation. This investigate air infiltration and various factors that decrease it in timber frame buildings and suggest ways to improve air-tightness for several structural types. Timber frame buildings can be classified into light frame, post and beam, and log house. Post and beam includes Han-ok (a Korean traditional building). Six light frame buildings, three post and beam buildings, one Korean traditional Han-ok and a log house were selected as specimens. Blower door tests were performed following ASTM E779-03. The light frame buildings showed the highest air-tightness, followed by post and beam structures, and last, log houses.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.319-326
• /
• 2012

Han-green building is one of the modernized Korean traditional buildings developed by Korea Forest Research Institute. This building was developed to increase the competitiveness of Korean traditional building using state-of-art technologies; hence Han-green building has the inherent characteristics of traditional building such as exposed wood frame in wall. Because of discontinuity in wall by the exposed wood frame, there is a concern on heat-air leaking in terms of energy performance. In this study, air-tightness of Han-green building was evaluated to investigate the influence of gaps between frames and in-fill walls. Blower door test was carried out to evaluate the air-tightness, and air-change rate (ACH50) was evaluated by averaging four set of pressurization and depressurization test. The air-change rate of Han-green house was 5.91 $h^{-1}$. To improve energy performance of Han-green house, thermal infrared images of Han-green house were taken in winter with heating to find out where the heat loss occurred. It was found that the building lost more heat through gaps between frames and in-fill walls rather than through other parts of this building. After covering all the gaps by taping, the blower door test was performed again, and the air-change rate was improved to 5.25 $h^{-1}$. From this analysis, it was concluded that the heated air can leak through the gaps between frames and walls. Therefore, when one designs the post and beam building with exposed frame, the detail design between frame and wall needs to be carefully dealt. However, Han-green building showed relatively high air-tightness comparing with other country research results.

• 한국주거학회논문집
• /
• 제13권2호
• /
• pp.73-78
• /
• 2002

Recently, the energy consumption has been sharply increased and the environmental pollution has been serious, resulted in increased use of fossil fuel. These facts are applied to most fields, and are especially important issues in the field of architecture. The energy consumption rate of building is about 30% of all energy consumption, and the rate of residential is about 20% of the rate of building and is increasing gradually. The purpose of this article is firstly to analyse an actual energy consumption rate of model building and compare it with alternative methods, which are applied passive system to, and secondly to suggest an optimal passive method for saving energy. The conclusion of this study is as follows; 1) As compared with the existing house on actual energy consumption rate, 6% in changing orientation to a south, 9% in using double low-e glazing and 23% in shading is decreased. 2) The change of insulation from 50 to 100mm did not show dramatical difference in energy consumption rate. 3) As changed indoor temperature at 2$0^{\circ}C$ in winter and 27$^{\circ}C$ in summer, the rate shows a reduction of 14% compared with the existing condition.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.131-137
• /
• 2010

가정용에서 사용되고 있는 에너지는 도시가스와 전기에너지로 구분할 수 있으며, 가정용 에너지 소비형태는 도시가스보다 전기에너지의 사용량이 증가하고 있다. 최근에는 저탄소 및 에너지 절감에 대한 이슈로 인해 전전화(全電化) 주택에 대한 관심이 높아지고 있는 실정이다. 이에 따라 누적된 에너지 소비 형태를 이용하여 가정용에서 소비된 에너지원별 사용량 및 에너지 지출비용을 분석하였다. 분석 결과 1차 에너지원인 도시가스 사용량의 감소와 더불어 전기에너지의 사용량이 점차 증가하고 있는 추세이다. 본 논문에서는 과거 25년간의 에너지 소비 이력 데이터를 이용하여 가정용에서 사용되는 에너지원의 사용량을 분석하고, 전전화 주택 도입 시 예상되는 전력량 및 열에너지 양과 에너지 비용을 분석하였다.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.39-45
• /
• 2016

Purpose: The purpose of this study is to analyze the energy saving and cost benefit analysis of the Low-income Energy Efficiency Treatment Program supported by KOREF(Korea Energy Foundation). This program was launched in 2007 and performs building energy retrofit for the low-income and energy poverty houses. Method: Energy simulation and cost benefit analysis were accomplished for the low-income detached houses. The structure of detached house was a lot og block structure, wood frame (single glass) and concrete roof. Baseline model of the low-income detached houses was proposed. Result: Annual heating energy consumptions were decreased by about 3.2% with the window system replacement(Case 1), 9.3% with reinforcement of insulation(Case2), and 12.5% with both(Case 3) compared to those of baseline model. The construction cost will be recouped within 5 years for the Case 1, 3 years for the Case 2, and 3 years for the Case 3. Case 3 was the most cost beneficient construction method in the analyzed cases in this study.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.431-435
• /
• 2008

Geothermal heat pump system using standing column wells as their ground heat exchanger can be used as a highly efficient source of heating and cooling in massive buildings. But there is no case of a small scale residential house. So this study estimated heating coefficient of performance(COP) of geothermal heat pump system using standing column well type which is excellent in heat recovery in the residential house. As a result of analysis, The COP of heat pump is over average 6 and is excellent. And in consequence of making a comparative study according to the bleeding, the cop is higher in the case of bleeding. Therefore, bleeding affects the performance of the system. This study has shown performance result that stands on actual data. Therefore, this study provides ground data that needs when a low capacity of system designs for a residence with confidence elevation.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.94-100
• /
• 2022

A study was conducted to significantly increase the heat transfer area by simultaneously burying the excel pipe in the floor and wall of a container house, thereby greatly reducing the initial heating time. In addition, a small hot water boiler suitable for the heating load of a small container house with a maximum area of 6 m² was studied. A wall-mounted hot water boiler was developed as a result of the study. When a hot water boiler is installed outdoors for heating, heat radiation energy is lost in winter from the hot water boiler and hot water pipe due to the low temperature. We propose an approach through which the energy loss was greatly reduced and the temperature of hot water increased in proportion to the operating time. Moreover, as the mass flow rate of the hot water flowing inside the excel pipe increased, the temperature of the hot water decreased. The temperature of the wall and floor surfaces of the container house increased in proportion to the increase in the mass flow rate of hot water flowing inside the excel tube. Natural convection heat transfer was realized from the wall and floor surfaces of the container house, and the heat transfer area was increased by a factor of 3 with respect to heat transfer area limited to the floor by the existing hot water panel. As a result, the initial temperature increase rate was much higher because of the larger heat transfer area.

• 농업생명과학연구
• /
• 제50권2호
• /
• pp.175-185
• /
• 2016

본 연구에서는 UTC 시스템을 대표적인 농업시설인 돈사에 적용하기에 앞서, UTC 제어 시스템 및 프로그램 개발에 따른 돈사 내 적정 사육 환경 유지 및 난방에너지 저감을 위한 기초자료로 활용하고자, 2동의 실험돈사를 제작, UTC 제어 시스템 적용에 따른 실험돈사 내부 온도 변화 및 에너지를 비교, 분석하였다. 제어 시스템은 T1~T4, 총 4점의 온도를 측정 후 프로그램 내 알고리즘에 의해 O1~O5, 총 5개의 출력 신호를 ON/OFF 방식으로 각각 제어하도록 구성하였다. 온도 설정은 실험돈사 내부 온도 28.0℃, UTC 내부 온도 34.0℃로 설정하였고, 측정된 온도와 비교를 통해 출력 신호를 제어하였다. 3일간, 제어 시스템을 가동한 돈사의 경우 최고 온도는 평균 31.8℃로 측정되었다. 같은 시간, 비교돈사의 최고 온도는 평균 36.6℃로 제어 시스템을 가동한 돈사의 내부 온도가 약 4.8℃ 낮은 것으로 나타났다. 또한 제어 프로그램의 가동에 따라 UTC 플레넘 최고 온도는 평균 50.5℃까지 상승한 것으로 나타났다.

• KIEAE Journal
• /
• 제11권5호
• /
• pp.3-12
• /
• 2011

Industrialization and development of technology satisfied various humanly needs and lay the basis of numerous benefit and profit. New technologies like these mostly required large amounts of fossil Fuel, Fossil energy depletion rate was increasing rapidly. However, technical development for Human race required absolute sacrifice of the environment. Especially, 'City' which had been focused as stage of human activities, allowed to continue to have fossil energy dependent activities, and it shows in many data that the city is responsible for the 75-80% of the green house gas by human. In order to solve the problem relating climate changes and energy, European countries already made progress studies on many of the low carbon green city and pilot case construction. Especially, Germany, Austria, Holland, Sweden who had been playing leader role on environmental awareness and ecological concept, are actively constructing low carbon green city project based on Ecological city planning scheme. These projects positively utilize planning scheme that limits carbon emission using Urban Metabolism concept. Therefore, throughout this study, I would like to present planning and direction of future domestic low carbon green city by analyzing theories relative theories and best practices in Europe.