Browse > Article
http://dx.doi.org/10.14775/ksmpe.2022.21.02.094

Characteristics of Temperature Distribution of Wall, Floor, Air and Hot Water by Burying the Excel Pipe on the Floor and Wall of a Container House  

Cho, Dong-Hyun (Mechanical Engineering, DAEJIN UNIV.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.21, no.2, 2022 , pp. 94-100 More about this Journal
Abstract
A study was conducted to significantly increase the heat transfer area by simultaneously burying the excel pipe in the floor and wall of a container house, thereby greatly reducing the initial heating time. In addition, a small hot water boiler suitable for the heating load of a small container house with a maximum area of 6 m2 was studied. A wall-mounted hot water boiler was developed as a result of the study. When a hot water boiler is installed outdoors for heating, heat radiation energy is lost in winter from the hot water boiler and hot water pipe due to the low temperature. We propose an approach through which the energy loss was greatly reduced and the temperature of hot water increased in proportion to the operating time. Moreover, as the mass flow rate of the hot water flowing inside the excel pipe increased, the temperature of the hot water decreased. The temperature of the wall and floor surfaces of the container house increased in proportion to the increase in the mass flow rate of hot water flowing inside the excel tube. Natural convection heat transfer was realized from the wall and floor surfaces of the container house, and the heat transfer area was increased by a factor of 3 with respect to heat transfer area limited to the floor by the existing hot water panel. As a result, the initial temperature increase rate was much higher because of the larger heat transfer area.
Keywords
Container House; Excel Pipe; Heating System; Heating Load; Wall and Floor Surface of Container House; Temperature Distribution;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Ziou, H., Zhou, F., Zhang, Q., Wang, Q., & Song, Z., "Thermal management of cylindrical lithium-ion battery based on liquid cooling method with half-helical duct," Applied Thermal Engineering, Vol. 162, No. 11, pp. 114257, 2019.   DOI
2 Kim, J. C., Ha, K. S., Park, R. J., Kim, S., "1-D Two-phase Flow Investigation for External Reactor Vessel Cooling," Proc. of the KFMA Annual Meeting, pp. 999-1000, 2016.
3 Kim, J. D., Kim, S. S. and Choi, M. H., "A Study on the Block Plan Characteristics and Openness of the Apartment Complexes," Architectural Institute of Korea, Vol. 26, No. 4, pp. 99-107, 2010.
4 Daniela, P., Florina, U. and Abel, H. G., "Simulation Models for the Analysis of Space Heat Consumption of Buidings," ENERGY, Vol. 34, No. 1, pp. 1447-1453, 2009.   DOI
5 Cho, B. J., Han, H. H., Koo, J. S., "Damping Device for Hydraulic Breaker: Impact and Noise Reduction," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 4, 2018.
6 Jo, D. O. and others, "A Study on Developement of Korean District Heating System in Apartment of Korean District Heating System in Apartment Building," Korea Institute of Construction Technology and Korea District Heating Corporation., 2007.
7 Lee, C. R., Ahn, K. C., B. Kim, H., Jeong, Y. J., Kang, D. G., "A Numerical Study of Vent Silencer Using Aluminum Foam," Proceedings of the KSMPE Spring Conference, pp. 8, 2018.
8 Saw, L. H., Poon, H. M., San Thiam, H., Cai, Z., Chong, W. T., Pambudi, N. A., et al., "Novel thermal management system using mist cooling forlithium-in battery packs, Applied," Vol. 223, No. 8, pp. 146, 2018.   DOI
9 Chen, W. and Fang, X., "A Note on the Chen Correlation of Saturated Flow Boiling Heat Transfer," International Journal of Refrigeration, Vol. 48, pp. 100-104, 2014.   DOI
10 Monterio, E., Moreira, N. and Ferreira, A. S., "Planning of Micro-Combined Heat and Power Systems in the Portuguese Sebario," Applied Energy, Vol. 86, No. 3, pp. 290-298, 2009.   DOI
11 Kim, S. Y., Kim, K. S., "A Study on Radiation Noise of Vehicle Power Seat Recliner using Finite Element Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 101~107, 2018.   DOI
12 Riley, M. P., "Development of a Correlation for Nuclete Boiling Heat Flux on Hemispherical Downward Facing Surface," Master's Thesis, Pennsylvania State University, United States, 2012.
13 Grebenyuk, G. G., "Mathematic Modeling as a Decision Tool in the Control of Brban Heat Supply," Automation and Remote Control, Vol. 67, No. 5, pp. 805-812, 2006.   DOI