• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.135-149
• /
• 1990

Housing owners in Korea have a variety of tax advantages such as income tax exemption for the imputed rent of owner-occupied housing, exemption from the capital gains tax and deduction of the estate tax for one-house households. These tax reliefs for housing owners not only conflict with the principle of horizontal and vertical equity, but also lead to resource misallocation by distorting the housing market, and thus bring about regressive distribution effects. Particularly in the case of Korea with its imperfect capital market, these measures exacerbate the inter-class inequality of housing ownership as well as inequalities in wealth, by causing the affluent to demand needlessly large housing, while the poor and young experience difficulties in purchasing residential properties. Therefore, the Korean tax system must be altered as follows in order to disadvantage owner-occupiers, especially those owners of luxury housing. These alterations will promote housing-ownership, tax burden equity, efficiency of resource allocation, as well as the desirable distribution of income. First, income tax deductions for the rent payments of tenants are recommended. Ideally, the way of recovering the fiscal equivalence between the owner-occupiers and tenants is to levy an income tax on the former's imputed rents, and if necessary to give them tax credits. This, however, would be very difficult from a practical viewpoint, because the general public may perceive the concept of "imputed rent" as cumbersome. Computing the imputed rent also entails administrative costs, rendering quite reasonable, the continued exemption of imputed rent from taxation with the simultaneous deduction in the income tax for tenants. This would further enhance the administrative efficiency of income tax collection by easing assessment of the landlord's income. Second, a capital gains tax should be levied on the one-house household, except with the postponement of payments in the case that the seller purchases higher priced property. Exemption of the capital gains tax for the one-house household favors those who have more expensive housing, providing an incentive to the rich to hold even larger residences, and to the constructors to build more luxurious housing to meet the demand. So it is not desirable to sustain the current one-house household exemption while merely supplementing it with fastidious measures. Rather, the rule must be abolished completely with the concurrent reform of the deduction system and lowering of the tax rate, measures which the author believes will help optimize the capital gains tax incidence. Finally, discontinuation of the housing exemption for the heir is suggested. Consequent increases in the tax burden of the middle class could be mitigated by a reduction in the rate. This applies to the following specific exemptions as well, namely, for farm lands, meadows, woods, business fields-to foster horizontal equity, while denying speculation on land that leads to a loss in allocative efficiency. Moreover, imperfections in the Korean capital market have disallowed the provision of long term credit for housing seekers. Remedying these problems is essential to the promotion of greater housing ownership by the low and middle income classes. It is also certain that a government subsidy be focused on the poorest of the poor who cannot afford even to think of owning a housing.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Journal of National Security and Military Science
• /
• s.15
• /
• pp.57-86
• /
• 2018

The ROKAF has been training for a number of exercise for victory in the war, but the lack of aviation ammunition has become a big issue every year. However, due to the limitation of defense resources, there are many difficulties in securing and stockpiling ammunition for the war readiness. Therefore, there is a need to find a way to secure aviation ammunition for war readiness in a more economical way, so In this study, we analyze the precedent research case and the case of the reduction of the purchase cost of weapon system of other countries, and then I have suggested a plan that is appropriate for our situation. As a result of examining previous research cases for this study, there were data that KIDA studied in 2012, Precision-guided weapons acquisition cost reduction measures pursued by US Air Force And the use of procurement agencies that are being implemented by NATO member countries. Based on this study, the following four measures were proposed to reduce the purchase cost of aviation ammunition. First, the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Second, join the NATO Support & Procurement Agency (NSPA) Third, it builds a purchasing community centered on the countries operating the same ammunition Fourth, participating in the US Air Force's new purchase plan for ammunition and purchase it jointly. The main contents of these four measures are as follows. 1. the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Korea has signed agreements on mutual logistics support with 14 countries including the United States, Israel, Indonesia, Singapore, Australia, and Taiwan. The main purpose of these agreements is mutual support of munitions and materials, also supporting the training of the peace time and promoting exchange and cooperation. However, it is expected that there will be many difficulties in requesting or supporting mutual support in actual situation because the target or scope of mutual aid of ammunition is not clearly specified. Thus, a separate agreement on the mutual co-operation of more specific and expanded concepts of aviation ammunition is needed based on the current mutual aid support agreements 2. join the NATO Support & Procurement Agency (NSPA) In the case of NATO, there is a system in which member countries purchase munitions at a low cost using munitions purchase agencies. It is the NATO Purchasing Agency (NSPA) whose mission is to receive the purchasing requirements of the Member Nations and to purchase them quickly and efficiently and effectively to the Member Nations. NSPA's business includes the Ammunition Support Partnership (ASP), which provides ammunition purchase and disarming services. Although Korea is not a member of NATO, NSPA is gradually expanding the scope of joint procurement of munitions, and it is expected that Korea will be able to join as a member. 3. it builds a purchasing community centered on the countries operating the same ammunition By benchmarking the NSPA system, this study suggested ways to build a purchasing community with countries such as Southeast Asia, Australia, and the Middle East. First, it is necessary to review prospectively how to purchase ammunition by constructing ammunition purchasing community centered on countries using same kind of ammunition. 4. participating in the US Air Force's new purchase plan for ammunition When developing or purchasing weapons systems, joint participation by several countries can reduce acquisition costs. Therefore, if the US Air Force is planning to acquire aviation ammunition by applying it to the purchase of aviation ammunition, we will be able to significantly reduce the purchase cost by participating in this plan. Finally, there are some limitations to the method presented in this study, but starting from this study, I hope that the research on these methods will be actively pursued in the future.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.492-506
• /
• 2019

Heavy metal contaminants in the shooting range are mostly present in a warhead circle or a metal fragment present as a particle, these fine metal particles are weathered for a long period of time is very likely that the surface is present as an oxide or carbon oxide. In particular, lead which is a representative contaminant in the shooting range soil, is present as more fine particles because it increases the softness and is stretched well. Therefore, by physical washing experiment, we conducted a degree analysis, concentration of heavy metals by cubic diameter, composition analysis of metallic substances, and assessment of applicability of gravity, magnetism and floating selection. The experimental results FESEM analysis and the measurement results lead to the micro-balance was confirmed thatthe weight goes outless than the soil ofthe same size in a thinly sliced and side-shaped structure according to the dull characteristics it was confirmed that the high specific gravity applicability. In addition, the remediation efficiency evaluation results using a hydrocyclone applied to this showed a cumulative remediation efficiency of 71%,twice 80%, 3 times 91%. On the other hand, magnetic sifting showed a low efficiency of 17%,floating selection -35mesh (0.5mm)target soil showed a relatively high efficiency to 39% -10mesh (2mm) efficiency was only 16%. The target treatment diameter of soil washing should be 2mm to 0.075mm, which is applied to the actual equipment by adding an additional input classification, which would require management as additional installation costs and processes are constructed. As a result, it is found that the soilremediation of shooting range can be separately according to the size of the warhead. The size is larger than the gravel diameter to most 5.56mm, so it is possible to select a specific gravity using a high gravity. However, the contaminants present in the metal fragments were found to be processed by separating using a hydrocyclone of the soil washing according to the weight is less than the soil of the same particle size in a thinly fragmented structure.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.1-14
• /
• 2022

The change in the management environment of the logistics industry in the era of global competition is becoming an era in which customers choose companies. Differentiation from competitors through the provision of products and services suitable for customers As customers' choices change depending on their superiority, companies are constantly striving to receive or retain customers' choices. Ultimately, this competitive structure can be seen as the importance of long-term relationship building. Therefore, in this study, we examined how factors related to transaction characteristics performed by logistics companies for customer satisfaction in the transaction relationship between cargo companies and shippers affect performance and long-term transaction intentions. First, we derived the factors of logistics service, cost, logistics infrastructure, and company competency, which are transaction characteristics factors of a logistics company that must be specifically realized for customer satisfaction in transactions between logistics companies. Second, we analyzed how the transaction characteristics factors of a logistics company affect the company's performance, and finally, how the company's performance factors affect long-term transaction intentions. As a result of empirical analysis, there were no statistically significant results on the relationship between transaction characteristics and performance of logistics companies, which can be attributed to the small size of the logistics companies that were the sample. In other words, logistics companies that do not have sufficient capacity to provide services at low prices have no choice but to engage in constant bleeding competition. It can be seen that it reflects the characteristics of the industry. On the other hand, the relationship between corporate performance factors and long-term transaction intention was found to have a positive relationship. The higher the level of partnership with logistics companies and visible financial performance is, the higher the transaction will be in the future, and the more the transaction volume will be gradually increased. And even if it costs a little more, it can be seen that the intention to continue trading is greatly expressed.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.180-187
• /
• 2022

In order to select suitable light in a plant factory, electric energy use efficiency and light use efficiency should be considered simultaneously to consider operating costs as well as quantitative and functional aspects. The growth characteristics, electric energy use efficiency, light use efficiency by light intensity, LED ratio, and photoperiod conditions were compared together. Light intensity is 60, 130, 230, and 320 µmol·m^-2·s^-1 treatments, and light quality is the mixing ratio of red light and blue light 8:2, 6:4, 4:6, and 2:8 treatments. Photoperiod is 9, 12, 15, and 18 hours treatments based on the daytime. In the light intensity experiment, the growth rate increased as the light intensity increased, but there was no significant difference in the light use efficiency. When comparing the leaf fresh weight per power consumption, only the 320 µmol·m^-2·s^-1 treatment group showed significantly low efficiency, and there was no significant difference in the other treatments, so 230 µmol·m^-2·s^-1, which produced the most, was the most efficient. In the light quality experiment, the ratio of red light and blue light was measured to be high at the same time as the growth rate and light use efficiency in RB 8:2, and there was no significant difference in color difference and flavonoids content, so a Red:Blue ratio of 8:2 was the most suitable condition. In the photoperiod experiment, the longer the photoperiod, the higher the growth rate. However, there was no significant difference in the growth rate over 12 hours of daytime, so 12 hours considering the light consumption efficiency was a suitable condition. Based on the above results, LED light environmental conditions for perilla growth in plant factories were light intensity, light quality, and day length of 230 µmol·m^-2·s^-1 or more, 8:2, and 12 hours or more, respectively.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.79-105
• /
• 2023

Due to unprecedented extreme weather events such as global warming and climate change, many parts of the world suffer from severe pain, and economic losses are also snowballing. In order to address these problems, 'The Paris Agreement' was signed in 2016, and an intergovernmental consultative body was formed to keep the average temperature rise of the Earth below 1.5℃. Korea also declared 'Carbon Neutrality in 2050' to prevent climate catastrophe. In particular, it was found that the increase in temperature caused by greenhouse gas emissions hurts the environment and society as a whole, as well as the export-dependent economy of Korea. In addition, as the diversification of transportation types is accelerating, the change in means of choice is also increasing. As the development paradigm in the low-growth era changes to urban regeneration, interest in idle railway sites is rising due to reduced demand for routes, improvement of alignment, and relocation of urban railways. Meanwhile, it is possible to partially achieve the solar power generation goal of 'Renewable Energy 3020' by utilizing already developed but idle railway sites and take advantage of being free from environmental damage and resident acceptance issues surrounding the location; but the actual use and plan for these solar power facilities are still lacking. Therefore, in this study, using the big data provided by the Korea National Railway and the Renewable Energy Cloud Platform, we develop an algorithm to discover and analyze suitable idle sites where solar power generation facilities can be installed and identify potentially applicable areas considering conditions desired by users. By searching and deriving these idle but relevant sites, it is intended to devise a plan to save enormous costs for facilities or expansion in the early stages of development. This study uses various cluster analyses to develop an optimal algorithm that can derive solar power plant locations on idle railway sites and, as a result, suggests 202 'actively recommended areas.' These results would help decision-makers make rational decisions from the viewpoint of simultaneously considering the economy and the environment.

• The Korean Journal of Mycology
• /
• v.51 no.2
• /
• pp.81-90
• /
• 2023

The cultivation method of shiitake is divided into two methods: log cultivation and sawdust cultivation. Recently, the importance of sawdust cultivation has been highlighted due to problems such as environmental problems, rising labor costs, and a reduced labor force. Among the 24 Sawdust-cultivated Lentinula edodes cultivars in Korea stored by the National Institute of Forest Science, this study was conducted to select excellent cultivars under the sawdust block cultivation method. After inoculation, the sawdust mediums were cultured for 100 days (60 days in dark and then 40 days in light), and only Sanjo 712ho sprouted the primordia on the 10^th day of light culture (total 70 days of cultivation). As a result of cultivation, the average total yield of the 24 cultivars were 1,816 g and Sanjo 712ho was 2,267 g. The fruiting body yield was the highest in Sanjo 713ho with 3,443 g followed by Sanjo 710ho (3,355 g). Sanlim 10ho, Sansanhyang, and Sanjo 716ho showed low production with 174, 238, and 214 g, respectively. As a result of investigating the morphological characteristics of the fruit bodies, the fresh weight of Sansanhyang and Bambithyang was about twice as heavy as the overall average, and Sulbaekhyang was about twice as light. Bambithyang was the largest and longest in diameter and length of the stipe, and the thickness of the stem was the thickest in Sanjo 716ho. As for the hardness of pileus, Bambithyang showed the highest value at 1,276 g/5 mm, and Sanjo 711ho showed the lowest value at 542 g/5 mm. In summary, Bambithyang showed the best fruiting body characteristics and Sanjo 713ho showed the highest yield in the sawdust block cultivation method. This study, the cultivar with shortened cultivation periods and cultivars with excellent morphological characteristics and high yields.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1559-1575
• /
• 2009

As the basic old-age pension system was enforced in 2008, the base for old-age income security was founded. However, due to the basic old-age pension played a minor role as assistant allowance, it did not reach to sufficient level to cover full income security system. It is estimated that the dependency on private transfer income among the elderly who are difficult to be economically independent is still high. Therefore the poverty rate of the elderly households, who are not economically active or who are not protected by old-age income security system, is more likely to be higher than that of non-elderly households. Based on the assumption that public transfer income system should become a central means of old-age life guarantee, this study examined the poverty mitigation effects among the elderly households by comparing the private transfer income and the public transfer income. For this purpose, we selected single-elderly-households who have been considered the most vulnerable to poverty. We used 2006- 2008 Household Income and Expenditure Survey dataset that contained single-elderly who were older than 65 years old. To understand the conditions of poverty among single-elderly-households and the degree of poverty-reducing effect originated from income transfer system, we compared the poverty rates of total households and the whole elderly households. Next, we analysed the poverty of the single-elderly-households by social demographic factors such as gender, age, and economic activity. Our major findings are as follows: First, the poverty rate of the whole elderly households were not reduced, even though the basic old-age pension and long-term care management system were enforced in 2008. Second, half of the elderly households including single-elderly-households belonged to the absolute poverty line. Relatively higher level of poverty among the single-elderly-households was found especially those who were female, unemployed, low-educated, older, and rural single-elderly-households. Third, the effect of the public transfer income on mitigating the single-elderly-households poverty showed a little progress. However, even greater poverty reducing effect was found by the private transfer income system. Fourth, in a group of the public transfer systems, the public assistance such as supporting living costs contributed more to reduce poverty of the elderly population than the public pension system did.