• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.873-880
• /
• 2020

After pre-treatment of oyster shells according to particle size (0 ~ 1, 1 ~ 2, 2 ~ 5 mm) and pyrolysis temperature (400(P400), 500(P500), 600(P600), 800(P800)℃), changes in the properties of sediments mixed with pre-treated oyster shells were investigated. The primary component of the oyster shell was changed from CaCO3 to CaO at temperatures above 700℃. The Ca2+ concentration in P800 was 790 mg/L, which was 2 ~ 3 times higher than those in the control and other experimental samples. Ca2+ elution significantly increased at the pyrolysis temperature over than 600℃. In oyster shells pyrolyzed over 600℃, the pH of the pore water increased by 0.1 ~ 0.5, due the hydrolysis of CaO formed by the pyrolysis of CaCO3. The PO4-P of the overlying and pore water in P600 and P800 were 0.1 ~ 0.2 mg/L lower than those of the control. The increased pH and elution of Ca2+ from oyster shells should suppress the upwelling of PO4-P from the sediment. Based on the above results, it was confirmed that the pyrolysis temperature of oyster shells influenced NH3-N and PO4-P concentrations in the sediment; however, the particle size of oyster shells had little effect. The results of this study can be used as a foundation for research on the use of pyrolyzed oyster shells to improve low-contamination coastal benthic environments.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.60-76
• /
• 2022

This study presents a software full setup and the following test execution times in a Linux cluster for the United Kingdom Earth System Model (UKESM) and then compares the model results from control and experimental simulations of the UKESM relative to various observations. Despite its low resolution, the latest version of the UKESM can simulate tropospheric chemistry-aerosol processes and the stratospheric ozone chemistry using the United Kingdom Chemistry and Aerosol (UKCA) module. The UKESM with UKCA (UKESM-UKCA) can treat atmospheric chemistryaerosol-cloud-radiation interactions throughout the whole atmosphere. In addition to the control UKESM run with the default CMIP5 SO₂ emission dataset, an experimental run was conducted to evaluate the aerosol effects on meteorology by changing atmospheric SO₂ loading with the newest REAS data over East Asia. The simulation period of the two model runs was 28 years, from January 1, 1982 to December 31, 2009. Spatial distributions of monthly mean aerosol optical depth, 2-m temperature, and precipitation intensity from model simulations and observations over East Asia were compared. The spatial patterns of surface temperature and precipitation from the two model simulations were generally in reasonable agreement with the observations. The simulated ozone concentration and total column ozone also agreed reasonably with the ERA5 reanalyzed one. Comparisons of spatial patterns and linear trends led to the conclusion that the model simulation with the newest SO₂ emission dataset over East Asia showed better temporal changes in temperature and precipitation over the western Pacific and inland China. Our results are in line with previous finding that SO₂ emissions over East Asia are an important factor for the atmospheric environment and climate change. This study confirms that the UKESM can be installed and operated in a Linux cluster-computing environment. Thus, researchers in various fields would have better access to the UKESM, which can handle the carbon cycle and atmospheric environment on Earth with interactions between the atmosphere, ocean, sea ice, and land.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.409-415
• /
• 2022

Plant growth and development are also affected by root-zone environment. Therefore, it is important to consider the variables of the root-zone environment when establishing an irrigation strategy. The purpose of this study is to analyze the relationship between the volumetric moisture content (VWC), Bulk EC (ECb), and Pore EC (ECp) used by plant roots using FDR sensors in two types of rockwool media with different water transmission characteristics, using the method above this was used to establish a method for collecting and correcting available root-zone environmental data. For the experiment, two types of rockwool medium (RW1, RW2) with different physical characteristics were used. The moisture content (MC) and ECb were measured using an FDR sensor, ECp was measured after extracting the residual nutrient solution from the medium using a disposable syringe in the center of the medium at a volumetric moisture content (VWC) of 10-100%. Then, ECb and ECp are measured by supplying nutrient solution having different concentration (distilled water, 0.5-5.0) to two types of media (RW1, RW2) in each volume water content range (0 to 100%). The relationship between ECb and ECp in RW1 and RW2 media is best suited for cubic polynomial. The relationship between ECb and ECp according to volume moisture content (VWC) range showed a large error rate in the low volume moisture content (VWC) range of 10-60%. The correlation between the sensor measured value (ECb) and the ECp used by plant roots according to the volumetric water content (VWC) range was the most suitable for the Paraboloid equation in both media (RW1, RW2). The coefficient of determination the calibration equation for RW1 and RW2 media were 0.936, 0.947, respectively.

• Journal of Life Science
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2022

Natural products have gained increasing attention due to their advantage of long-term safety and low toxicity for a very long time. Torreya nucifera is widespread in southern Korea and Jeju Island and its seeds are commonly used as edible food. Oriental ingredients have often been reported for their insecticidal, antioxidant and antibacterial properties, but there have not yet been any studies on their antidiabetic effect. In this study, we investigated several biological activities of T. nucifera pericarp (TNP) and seeds (TNS) extracts and proceeded to characterize the antidiabetic compounds of TNS. The initial results suggested that TNS extract at 15 and 10 ㎍/ml concentration has inhibitory effects on α-glucosidase and protein tyrosine phosphatase 1B, that is 14.5 and 4.35 times higher than TNP, respectively. Thus, the stronger antidiabetic TNS was selected for the subsequent experiments to characterize its active compounds. Ultrafiltration was used to determine the apparent molecular weight of the active compounds, showing 300 kDa or more. Finally the mixture was then partially purified using Diaion HP-20 column chromatography by eluting with 50~100% methanol. Therefore we concluded that the active compounds of TNS have potential as therapeutic agents in functional food or supplemental treatment to improve diabetic diseases.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.67-76
• /
• 2022

This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m^-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m^-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO₃-N) and lasted bellower than pH 5.5 for 15-67 DAT. It was found that ammonium nitrogen (NH₄-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m^-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Journal of the Korean Chemical Society
• /
• v.65 no.3
• /
• pp.197-202
• /
• 2021

In this study, activated clay treated with H₂SO₄ (20% by weight) and heat at 90 ℃ for 8 h for acid white soil was used as an adsorbent for the removal of PO₄^3--P in water. Prior to the adsorption experiment, the characteristics of activated clay was examined by X-ray Fluorescence Spectrometry (XRF) and BET surface area analyser. The adsorption of PO₄^3--P on activated clay was steeply increased within 0.25 h and reached equilibrium at 4 h. At 5 mg/L of low PO₄^3--P concentration, roughly 98% of adsorption efficiency was accomplished by activated clay. The adsorption data of PO₄^3--P were introduced to the adsorption isotherm and kinetic models. It was seen that both Freundlich and Langmuir isotherms were applied well to describe the adsorption behavior of PO₄^3--P on activated clay. For adsorption PO₄^3--P on activated clay, the Freundlich and Langmuir isotherm coefficients, K_F and Q, were found to be 8.3 and 20.0 mg/g, respectively. The pseudo-second-order kinetics model was more suitable for adsorption of PO₄^3--P in water/activated clay system owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal than the pseudo-first-order kinetics model. The results of study indicate that activated clay could be used as an efficient adsorbent for the removal of PO₄³-P from water.

• The Korea Journal of Herbology
• /
• v.37 no.5
• /
• pp.89-96
• /
• 2022

Objectives : This research was performed to analyze the components in the different parts of Lythrum salicaria L. and to compare which parts of L. salicaria L. are appropriate for food development. Methods : L. salicaria L. was extracted in 20% EtOH at 100 ℃ for 4 hours. Cytotoxicity was investigated in 3T3-L1 cells after treatment of 10-500 ㎍/ml L. salicaria L. for 24 hours. Total polyphenol content (TPC) was estimated using 1 N Folin-ciocateu reagent. 2,2-Diphenyl-1-picryhydrazyl (DPPH) radical scavenging activity was estimated using DPPH reagent and gallic acid. The chemical composition was analyzed by high-performance liquid chromatography (HPLC). 1) Results : The half maximal inhibitory concentration (IC50) in the extracts of the whole plant, aerial parts, and root parts was 350 ㎍/ml, over 500 ㎍/ml, and 150 ㎍/ml, respectively. The TPC in the extracts of the whole plant, aerial parts, and root parts was 527.1 mg/g, 422.6 mg/g, and 781.1 mg/g, respectively. The averages of vitexin contents in the aerial parts, and root parts were 256.7 ± 154.9 ㎍/g and 266.1 ± 63.2 ㎍/g, respectively. The averages of TPC in the leaves, roots, flower stalks and stems were 224.0 ± 53.7 tannin acid (TA) mg/g, 221.8 ± 70.2 TA mg/g, 249.8 ± 34.4 TA mg/g, and 67.7±8.9 TA mg/g, respectively. The averages of DPPH radical scavenging activity in the leaves, roots, flower stalks, and stems were 282.01 ± 43.3 gallic acid equivalent (GAE) 𝜇mole/g, 260.16 ± 44.1 GAE 𝜇mole/g, 288.0 ± 9.3 GAE 𝜇mole/g, and 97.6 ± 10.7 GAE 𝜇mole/g, respectively. Conclusions : There were no significant differences in the content of components or antioxidant activity in the aerial parts compared to those in the whole plant of L. salicaria L. Furthermore, the root parts had low extract yield, cytotoxicity, and quality control problems, therefore our results suggest that the use of the aerial part of L. salicaria L. would be the most appropriate for food development.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.20-32
• /
• 2022

This study implemented a chelating agent (Ethylenediaminetetraacetic acid, EDTA) in purification to obtain high-purity vanadium pentoxide (V₂O₅) for use in VRFB (Vanadium Redox Flow Battery). V₂O₅ (powder) was produced through the precipitation recovery of ammonium metavanadate (NH₄VO₃) from a vanadium solution, which was prepared using a low-purity vanadium raw material. The initial purity of the powder was estimated to be 99.7%. However, the use of a chelating agent improved its purity up to 99.9% or higher. It was conjectured that the added chelating agent reacted with the impurity ions to form a complex, stabilizing them. This improved the selectivity for vanadium in the recovery process. However, the prepared V₂O₅ powder exhibited higher contents of K, Mn, Fe, Na, and Al than those in the standard counterparts, thus necessitating additional research on its impurity separation. Furthermore, the vanadium electrolyte was prepared using the high-purity V₂O₅ powder in a newly developed direct electrolytic process. Its analytical properties were compared with those of commercial electrolytes. Owing to the high concentration of the K, Ca, Na, Al, Mg, and Si impurities in the produced vanadium electrolyte, the purity was analyzed to be 99.97%, lower than those (99.98%) of its commercial counterparts. Thus, further research on optimizing the high-purity V₂O₅ powder and electrolyte manufacturing processes may yield a process capable of commercialization.

• Ecology and Resilient Infrastructure
• /
• v.9 no.3
• /
• pp.183-193
• /
• 2022

The growth inhibitory effect of Microcystis aeruginosa according to the ultrasonic irradiation time was evaluated using a large algae sample volume (10 L) for various ultrasonic irradiation times (0.5, 1, 1.5, 2, 2.5 and 3 hr) at a laboratory scale. Based on the analysis of Chl-a and cell number of M. aerginosa, algae growth inhibition was observed with the decrease in Chl-a and cell number in all experimental groups after the ultrasonic irradiation. For the experimental group (T_B, T_C, T_D) with an ultrasonic irradiation time of less than 2 hours, rapid regrowth of algae was observed after growth inhibition, but the experimental group (T_E, T_F, T_G) with an irradiation time of more than 2 hours successfully inhibited algal growth lasting one or two more days. Based on the comparison of the recovery time to initial cell number the experimental group (T_B, T_C, T_D) took less than 20 days whereas the experimental group (T_E, T_F, T_G) took about 30 days. Correspondingly, the experimental group showed a high first order decay rate (𝜅) in proportion to the ultrasonic irradiation time during the growth inhibition period. Additionally, the specific growth rates (𝜇) during regrowth in the experimental group with irradiation time of more than 2 hours were relatively low compared to those in the experimental group with less than 2 hours. Therefore, ultrasonic irradiation for more than 2 hours is required for long-term (30 days) inhibition of algal growth in stagnant waters. However, the appropriate ultrasonic irradiation time for algae growth inhibition should be determined according to various field conditions such as the volume of stagnant water, water depth, flow rate, algae concentration, etc. Finally, damages to the algal cell surface and cell membrane were clearly observed, and both destruction and disturbance of gas vesicles of M. aeruginosa in the experimental group were discovered, indicating the growth inhibitory effect of Microcystis aeruginosa according to the ultrasonic irradiation time was confirmed.