• Journal of the Korean GEO-environmental Society
• /
• v.16 no.11
• /
• pp.29-37
• /
• 2015

Non-excavation method is needed to secure the stability of existing structures during construction. Therefore, prediction of ground settlement is essential. Causes of settlement when using steel pipe indentation method are leading pipe-steel pipe gap, excessive excavation and soil-steel pipe friction etc. Also they are similar to the causes of settlement when using Shield TBM during construction. In this study, ground settlement during steel pipe indentation is predicted by the Gap Parameter Method and Volume Loss Method which are kinds of Shield TBM prediction Method. and compared with those of prediction methods by conducting field test. As a result, Volume Loss Prediction Method is the most similar to the field tests. However, It is needed to additional studies, such as decision of the factors and adaptability for total settlement predictions of non-excavation method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.91-98
• /
• 2004

This paper proposes a PCB plane model for generic SPICE circuit simulators. The proposed model reflects two frequency-dependent losses, namely skin and dielectric losses. After power/ground plane pair is divided into arrays of unit-cells, each unit-cell is modeled using a transmission line and two loss models. The loss model is composed of a resistor for DC loss, series HL ladder circuit for skin loss and series RC ladder circuit for dielectric loss. To verify the validity of the proposed model, it is compared with SPICE ac analysis using frequency-dependent resistors. Also, we show that the estimation results using the proposed model have a good correlation with that of VNA measurement for the typical PCB stack-up structure of general desktop PCs. With the proposed model, not only ac analysis but also transient analysis can be easily done for circuits including various non-linear/linear devices since the model consists of passive elements onl.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.8
• /
• pp.51-61
• /
• 2011

Spatial estimation of the thickness and depth of the geological profile has been regarded as an important procedure for the design of soft ground. A minimum variance criterion, which has often been used in traditional kriging techniques, does not always guarantee the optima1 estimates for the decision-making process in geotechnical engineering. In this study, a geostatistica; framework is used to determine the optimal thickness of the consolidation layer and the optimal area that needs the adoption of prefabricated vertical drains via indicator kriging and loss function. From the exemplary problem, different optimal estimates can be obtained depending on the loss function chosen. The design procedure and method considering the minimum expected loss presented in this paper can be used in the decision-making process for geotechnical engineering design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.309-312
• /
• 2008

This paper describes ultimate load tests which were performed to show the effects of prestress loss and tendon corrosion on the flexural strength of post-tensioned concrete beams and the occurrence of wire fracture. Five test specimens were fabricated in laboratory with the variations of the prestress of tendons and the loss of tendon area. For two specimens, small area of tendon at the center of the beam was exposed by using diameter 25mm drill and the exposed tendon was corroded using accelerated corrosion equipment. During the tests, deflections, crack width, and strain changes were measured and acoustic events were monitored with two acoustic sensors. Tests results show that the ultimate flexural strength of test specimens with corroded tendons is smaller than the predicted flexural strength which is calculated considering the loss of tendon area. It is considered that estimation of flexural strength of PSC beams with corroded tendons is very complicated just based on the loss of tendon area obtained by one-side visual inspection.

• Journal of the Korean Statistical Society
• /
• v.22 no.2
• /
• pp.191-200
• /
• 1993

An asymptotic estimation problem of the unknown mean is studied under a general loss function. The proof of this result is based on the asymptotic expansion of the risk function. Also conditions for second order admissibility and minimaxity of a class of estimators depending only on the sample mean are established.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.215-220
• /
• 2002

This paper describes a simulation model for estimation the performance of the swash plate type compressor for automotive air conditioning system. The model includes consideration of both the compression process and the dynamic behavior. Also, this study compares the results obtained from the performance simulation with experimental results. Further, the effects of the inclined angle of swash plate on the performance of swash plate type compressor are discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.173-177
• /
• 1998

This paper presents the asymptotic relative efficiency of the nonparametric estimator relative to the parametric maximum likelihood estimator of the reliability function under the proportional hazards model of random censorship. Also we examine the efficiency loss due to censoring proportions and misson times.

• Communications for Statistical Applications and Methods
• /
• v.20 no.2
• /
• pp.137-145
• /
• 2013

The use of pooled standard deviation can reduce the efficiency loss in optimum allocation when strata standard deviations are estimated and several of them are equal. Also shown is that the pooled standard deviation is useful in optimum allocation under a multivariate setting. In addition to theoretical development, we provide the result of simulation study to support the theory.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.153-167
• /
• 1994

Credibility theory has provided with a useful tool the assignment of weighting factor that reflects the credibility of the observed individual and collective experience to secure fair experience rate-,making. We review credibility models which can effectively estimate risk premiums using credibility theory, and suggest an empirical Bayed model based on the collective statistics to estimate the structural parameters. To illustrate the use of evolutionary models, the models are applied to the actual data, such as loss ratio, claim frequencies and severity, in the Korean automobile insurance. Also the possibilities of generalizations and applications of empirical models are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.834-837
• /
• 2004

In this study, the electric accelerated reinforcing bar corrosion test was carried out to estimate the coefficient of electrolytic corrosion based on the concept of Faraday's law according to rebar corrosion rate and concrete compressive strength which had an effect on the actual corrosion mass loss. The results of this paper allow the prediction of corrosion amount in the electric accelerated reinforcing bar corrosion test method.